All Electric R/C Car Series No.736

Item No:58736

1/10 R/C FORD BAJA BRONCO (CC-02)

The first generation Ford Bronco was relatively compact and extremely capable off-road, and this 4WD car joined numerous races. This R/C model assembly kit recreates the Baja Bronco, which was sold from 1971 to 1975 to commemorate victory in a major desert race. Its polycarbonate body captures the 1973 Bronco form in style, with a black sticker to use on the engine hood, and plated parts for the front grille, light covers and side mirrors. It can be paired with separately sold LEDs to light up the front and rear.

CC-02 Chassis - Off Road, Evolved
Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with plated five-spoke wheels and grippy block pattern tires, and is setup for the 242mm S wheelbase.

Specifications
★Length: 395mm, width: 196mm, height: 215mm ★Wheelbase: 242mm ★Tread: 160mm (front), 163mm (rear) ★Tire width/diameter: 33/90mm (front & rear) ★Ladder frame ★Longitudinal motor, shaft-driven 4WD ★3-bevel differential gears ★4-link rigid suspension (front & rear) ★Gear ratio = 17.33:1 (using kit-standard 16T pinion) ★Type 540 motor ★Contact your local Tamiya Agent regarding the ESC

Separately Required Items
★2-channel R/C system ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of April 3, 2024. Specifications are subject to change without notice.

All Electric R/C Car Series No.739

1/10 R/C 1998 Honda NSX RACING (TT-02)

Item No:58739

The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories.

The TT-02 is a highly balanced chassis offering shaft-driven 4WD along with 4-wheel double wishbone suspension and coil-sprung dampers, as well as common suspension arm and upright components for an easier assembly process.

Information is current as of April 10, 2024. Specifications are subject to change without notice.

All Electric R/C Car Series No.739

Item No:58739

1/10 R/C 1998 Honda NSX RACING (TT-02)

The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories.

The TT-02 is a highly balanced chassis offering shaft-driven 4WD along with 4-wheel double wishbone suspension and coil-sprung dampers, as well as common suspension arm and upright components for an easier assembly process.

All Electric R/C Car Series No.734

Item No:58734

1/10 R/C CITROEN DS (MB-01)

The Citroën front-wheel drive saloon car DS was honored with third place in the 1999 Car of the Century awards. In 1955, the Citroën DS was announced in Paris and it was sometimes dubbed the “spaceship’’ for its aerodynamic design. In addition, it featured hydraulically controlled mechanisms such as suspension, gearbox, clutch, steering and brakes. Around 1.45 million units including variants were produced between 1955 and 1975.

This R/C model assembly kit is based upon the MB-01 chassis. The MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.

Information is current as of April 10, 2024. Specifications are subject to change without notice.

All Electric R/C Car Series No.738

Item No:58738

1/10 R/C XM-01 PRO CHASSIS KIT

This compact shaft-driven 4WD chassis assembly kit features a front midship motor and transmits power from the spur gear in the center via front and rear propeller shafts. A longitudinal upright battery pack is positioned in the left side, contributing to optimum balance. Changing the rear section allows a choice from three wheelbases. The 4-wheel independent double wishbone suspension has aluminum-cylinder oil dampers. Front caster angle is 5 degrees, and hub carriers and uprights allow two types of ground clearance, while the front bumper skid angle reduces surface contact.

Featured Components
●Front & rear oil-filled gear differentials (two 39T and one 40T included) ●Front & rear universal drive shafts ●Aluminum oil dampers (touring car size) ●Hub carriers & uprights allow ground clearance changes ●Turnbuckle upper arms ●Full ball bearings ●Hi-torque servo saver (black) ●Polycarbonate chassis cover

Specifications
●Length: 308mm (with 225mm wheelbase) ●Width: 165mm ●Choice of 210mm, 225mm and 239mm wheelbases ●Bathtub frame ●Front midship motor, shaft-driven 4WD ●Front/rear oil filled gear differentials ●3-piece steering tie-rod ●4-wheel independent double wishbone suspension ●Aluminum cylinder oil dampers ●Gear ratio = 8.27:1 (with kit 22T pinion; 13 ratios between 10.71 and 6.28:1 are possible with separately sold pinions) ●Contact your local Tamiya Agent regarding the ESC

Separately Required Items
●M-Chassis compatible body ●Type 540 motor ●Tires ●2-channel R/C system ●Battery pack & charger

Information is current as of April 9, 2024. Specifications are subject to change without notice.

Masking No.226

Item No:87226

ULTRA THIN ALUMINUM STICKERS (2PCS.)

These semi-gloss aluminum stickers let fine detail show through thanks to their thinness, and are a great choice for static model car window frames among other uses. They can also be used for demarcation when painting your models. ★Thickness: 0.01mm ★Contains two 100mm x 144mm sheets.

Information is current as of April 3, 2024. Specifications are subject to change without notice.

Racing Mini 4WD Series No.103

Item No:18103

CROSS SPEAR 01 (VZ)

The Cross Spear 01 was designed by Takayuki Yamazaki, who also penned the DCR models among other Mini 4WD designs. Its body features eye-catching truss sections extending from front to rear, plus a canopy molded in tinted plastic. The VZ chassis is a compact base for the model, and comes in gray plastic with white A parts, accented by green spiral spoke wheels with small diameter, low-profile super hard tires.

VZ Chassis
The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents. It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS. This chassis features a gear ratio of 3.5:1.

Specifications
★Length: 158mm ★Width: 98mm ★Height: 35mm ★Includes motor ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is current as of April 3, 2024. Specifications are subject to change without notice.

1/35 Prehistoric World Series No.4

Item No:60204

1/35 PTERANODON

The Pteranodon swoops back into the Tamiya 1/35 Prehistoric World Series, and this assembly kit is sure to amaze with its lifelike depiction of the flying pterosaur, with parts molded in clear brown plastic, capturing features such as the long beak and extravagant crest. Its simple parts breakdown makes this model a fun assembly experience, and parts are included for a display base with sea and rock motifs.

Information is current as of April 3, 2024. Specifications are subject to change without notice.

1/24 Sports Car Series No.366

Item No:24366

1/24 “FULL-VIEW” MERCEDES-BENZ 300 SL

Announced in 1954, the Mercedes-Benz 300 SL remains an iconic car in the present day. Now, our 1/24 scale model of the car is released as a “full view” model assembly kit with clear body parts that can be left unpainted to show off the 300 SL’s space frame, engine and other interior features. Its bonnet and gull wing doors are opening parts. Metal transfers are included in the kit to depict emblems and mirror surfaces.

Information is current as of April 3, 2024. Specifications are subject to change without notice.

1/14 R/C Tractor Truck Series No.75

Item No:56375

1/14 R/C VOLVO FH16 GLOBETROTTER XL 750 4x2 TRACTOR

This R/C model assembly kit depicts a top-of-the-line Volvo truck in detailed 1/14 scale. Parts like the light podded roof bar and the low bar let you make this into a classy customized model. Its realistic chassis uses numerous metal parts and a 3-speed transmission.

Information is current as of April 3, 2024. Specifications are subject to change without notice.