TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

tony

tony

1/10 R/C TOYOTA CELICA GT-FOUR (ST205) (TT-02 CHASSIS)

Tuesday, 22 October 2024 10:04 Published in Tamiya

All Electric R/C Car Series No.743

Item No:58743

1/10 R/C TOYOTA CELICA GT-FOUR (ST205) (TT-02 CHASSIS)

Toyota developed this high-spec version of the sixth generation Celica with the aim of repeating in 1994 their global rally championship of the previous year. Now it appears as a radio control model assembly kit with a polycarbonate body recreating the car's classic form and separately molded parts adding plenty of detail.

TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 10-spoke wheels use semi-pneumatic treaded tires.

Specifications
★Length: 451mm, width: 186mm, height: 134mm ★Wheelbase: 257mm ★Tire width/diameter: 27/67mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of September 13, 2024. Specifications are subject to change without notice.

 

CROSS SPEAR 02 (VZ CHASSIS)

Tuesday, 22 October 2024 10:01 Published in Tamiya

Racing Mini 4WD Series No.104

Item No:18104

CROSS SPEAR 02 (VZ CHASSIS)

Length: 158 mm. Image shows painted and assembled kit.

This assembly kit creates a stylish Mini 4WD car known as the Cross Spear 02, a close relation to our earlier Cross Spear 01. The one-of-a-kind compact, lightweight design with a smooth, lowdown look, its cockpit shifted forward, and side trellis sections is the brainchild of Japanese designer Takayuki Yamazaki. It is based upon the compact race-focussed VZ chassis, with red Y-spoke wheels and super hard small diameter low-profile tires that minimize bounce after jumps.

VZ Chassis
The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents. It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS. This chassis features a gear ratio of 3.5:1.

Specifications
★Length: 158mm ★Width: 98mm ★Height: 44mm ★Includes motor ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is current as of October 10, 2024. Specifications are subject to change without notice.

1/24 Honda BALLADE SPORTS MUGEN CR-X PRO.

Tuesday, 22 October 2024 09:54 Published in Tamiya

1/24 Sports Car Series No.45

Item No:24045

1/24 Honda BALLADE SPORTS MUGEN CR-X PRO.

The Mugen CR-X PRO. was a special version of the Honda Ballade Sport CR-X, a fun FF lightweight sports car first announced in June 1983. Mugen is a famous tuner of Honda cars and they fitted the Mugen CR-X PRO. with a plethora of performance parts plus a revamped body with air dam bumpers and blister fenders that featured design work from Mooncraft, the company founded by Japanese car designer Takuya Yura. It also had upgrades to its intake and exhaust sytem and the suspension: honed on the circuit and often customized even further by its owners, the CR-X PRO. really stood out among numerous custom CR-X cars.

About the Model
★This is a 1/24 scale plastic model assembly kit. Length: 154mm, width: 75mm, height: 59mm. ★The powerful form of this customized car is captured in style. ★A realistic interior has depictions of seats, instrumentation and more. Choose between 2 types of steering wheel. ★Exhaust and suspension details enliven the underside of the model. ★Decals recreate features such as body stripes, window frames and seat patterns. ★Realistic synthetic rubber tires.

Information is current as of October 17, 2024. Specifications are subject to change without notice.

UNIVERSAL GEARBOX 2

Tuesday, 22 October 2024 09:52 Published in Tamiya

Educational Construction Series (Units) No.260

Item No:70260

UNIVERSAL GEARBOX 2

This assembly type gearbox has two shafts which provide independent motion; each shaft offers three gear ratios, and you can change the attachment position of the removable mount to switch between four different output directions. Clear parts leave internal mechanisms visible. Crank plates are included.

Specifications
★Length: 63mm, width: 29.8mm, height: 27.8mm (dimensions when assembled) ★Shaft section width: 13.4mm ★Type 130 motor included. ★3mm hex shaft gear ratios are 102.4:1, 273.1:1 and 728.2:1 ★2mm shaft gear ratios are 8.5:1, 22.8:1 and 60.7:1 ★Crank plates and small parts for attachment are included.

Information is current as of September 3, 2024. Specifications are subject to change without notice.

MINI 4WD HEX WRENCH SCREWDRIVER BIT

Tuesday, 22 October 2024 09:46 Published in Tamiya

Screwdrivers No.165

Item No:74165

MINI 4WD HEX WRENCH SCREWDRIVER BIT

Plug this into the grip in the separately sold Mini 4WD Screw & Nut Driver Set PRO to efficiently tighten up 2mm cap screws. This bit is magnetic, is crafted in chrome molybdenum vanadium steel, and has the bit size laser engraved in it. ★Length: 20mm ★Bit size: 1.5mm hex ★For use on 2mm cap screws, and other screws with 1.5mm hex holes.

Information is current as of September 3, 2024. Specifications are subject to change without notice.

FULLY COWLED MINI 4WD COMPACT BAG (BLACK)

Tuesday, 22 October 2024 09:44 Published in Tamiya

Mini 4WD Special Edition Products (Parts)

Item No:95668

FULLY COWLED MINI 4WD COMPACT BAG (BLACK)

This handy little nylon bag is perfect for carrying your Mini 4WD car or parts, and can even take the Mini 4WD Parts Storage Box Set (Item 15460), the Mini 4WD Motor Case 2 (Item 15505) or the Mini 4WD Parts Case (Item 15163)! It has dual zippers and opens up nice and wide for easy access. This black back has pink printed logos: Fully Cowled Mini 4WD on the front and the Tamiya logo on the back. ★Interior dimensions: 120mm x 190mm x 115mm (height) ★Maximum load: 1kg

Information is current as of September 3, 2024. Specifications are subject to change without notice.

Mini 4WD Special Edition Products (Parts)

Item No:95674

FULLY COWLED 30TH ANNIV. HG CARBON FRONT STAY (1.5mm/SILVER)

★This 1.5mm stay can be fitted to your Fully Cowled Mini 4WD Series car without the need for any modifications! ★It commemorates thirty years of the Series, and features a rather special silver color carbon fiber pattern plus wording printed in blue. ★Sporting refined lines, it has holes for the attachment of 9mm, 13mm and 19mm rollers to ensure there are setup options aplenty. ★The stay can also be attached to the underside of your car to lessen the likelihood of getting stuck on the course fence.

Information is current as of September 3, 2024. Specifications are subject to change without notice.

Mini 4WD Special Edition Products (Parts)

Item No:95675

FULLY COWLED 30TH ANNIV. HG CARBON REAR BRAKE STAY (1.5mm/SILVER)

★This lightweight and rigid 1.5mm thickness stay has a big surface area for maximum versatility in placement of your brake sponge. ★It commemorates thirty years of the Series, and features a rather special silver color carbon fiber pattern plus wording printed in blue. ★Holes can be used to attach mass dampers and other accessories. ★Comes with a range of screws, aluminum collars and other parts for attachment. ★Use with separately sold brake sponge products.

Information is current as of September 3, 2024. Specifications are subject to change without notice.

Mini 4WD Special Edition Products

Item No:95676

CYCLONE MAGNUM POLYCARBONATE BODY SPECIAL (AR CHASSIS) FULLY COWLED MINI 4WD 30TH ANNIVERSARY

★The Fully Cowled Mini 4WD series celebrates 30 fantastic years with this special commemorative version of the legendary Cyclone Magnum. ★The body is lightweight polycarbonate, combined with the AR chassis. ★Fluorescent green wheels are paired with super hard small diameter low-profile tires. ★Dedicated clear stickers and the commemorative 30th anniversary sticker (blue version) are included.

Information is current as of September 3, 2024. Specifications are subject to change without notice.

1/24 RENAULT 5 TURBO

Monday, 02 September 2024 14:06 Published in Tamiya

Item No:24368

1/24 Sports Car Series No.368

1/24 RENAULT 5 TURBO

From its 1972 debut onward the Renault 5 proved a massive success, and in 1981 there appeared a special and rather different Renault 5 Turbo version of the car, intended to run in global rally races. The rear seats were removed and replaced with a midship-mounted 160hp 1.4-liter inline-four engine that was paired with a  turbocharger and fuel injection technology to provide a top speed of 200km/h and an impressive 0-400m time of just fifteen seconds. Renault were not satisfied with simply changing the engine, though, giving the 5 Turbo double wishbone suspension and ventilated brake discs. The body was also updated and had prominent overfenders; its use of aluminum roof and doors, as well as plastic bonnet and fenders meant that the car weighed in at a mere 910kg. Inside the car was a dashboard with no less than ten different meters, and an interior with liberal use of leather. The Renault 5 Turbo was able to put its money where its mouth was, taking a debut rally win in 1981 in Monte-Carlo and going on to compete in numerous events during its career.

About the Model
★This is a 1/24 scale plastic model assembly kit. Length: 152mm, width: 74mm, height: 57mm. ★The revamped, power-packed form of the car is captured in style. ★Features authentic depictions of interior, suspension and chassis underside. ★Solid synthetic rubber tires have realistic tread patterns. ★Decals recreate body logos, seat fabric, emblems and more. ★Comes with a driver figure in a race suit.

Information is current as of August 28, 2024. Specifications are subject to change without notice.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  4 
  •  5 
  •  6 
  •  7 
  •  8 
  •  9 
  •  10 
  •  Next 
  •  End 
  • »
Page 1 of 333

Social sharing

Who's Online

We have 891 guests online