Programming / Upgrading
Data reading wirelessly
With Hobbywing’s “WiFi Express” module and iPhone or an Android phone (with the
HOBBYWING WiFi Link software installed), the user can remotely program parameters,
upgrade firmware and check relevant data of the ESC without leaving the control stand
Adjustable Throttle & Brake PWM Frequencies
Independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate
throttle and brake control for all classes of competitions (esp. the Stock class).
Efficient Heat Dissipating System
The aluminum casing and reticular heat sink combined with the HOBBYWING patented
copper heat-conductive plates which are attached to the MOSFET board allows the internal
heat to be quickly transferred to the heat sink for dissipation. With the high-performing detachable
cooling fan, a highly reliable heat transfer system for maximum cooling is accomplished.
High current/voltage BEC
The built-in switch mode BEC with a maximum output of 8A and voltage adjustable
between 6V and 7.4V allows the user to use various high voltage servos.
Separate Programming/Fan Port
The separate PRG/FAN port on the ESC can power an external fan for maximize
cooling performance or connect the ESC to a LCD program box or WiFi
module for ESC programming.
Advanced and Secure Electronic Switch
The XR10 Pro ESC features an electronic switch with a lifespan of over 50000 on/off cycles,
housed in a completely waterproof, dust-proof and shock-resistant design.
Innovative data-logging Function
This ESC features the data-logging function which can record
the maximum ESC/motor temperature, RPM and etc. in
real time and allows the user to analyze the recorded data
via a the LCD program box or WiFi module after each use.
Specifications
Product Name : XERUN XR10 PRO
Product Number : 30112600(Black) / 30112601(Orange) / 30112602(Red)
Type
Scale : 1/10th
Brushed/Brushless : BL
Sensored/Sensorless : SD
Waterproof : No
Specifications
Cont./Peak Current : 160A/1200A
Input Voltage : 2-3S LiPo/4-9 Cell NiMH
BEC Output : Swich Mode：6V/7.4V,4A
Wires & Connectors
Input Wires : Black-12AWG-200mm*2
Output Wires : Black-12AWG-200mm*3
Input Connectors : No
Output Connecotors : No
Fan
Size : 25.0x25.0x10.0mm
Voltage Range : 5-7.4V
Powered by : Powered by BEC
ESC Programing via
SET Button on ESC : Not Supported
LED Program Box : Not Supported
LCD Program Box : Supported
WiFi Module : Supported
Program Port : Separate Program Port
Firmware
Firmware Upgrade : Supported
Size & Weight
Size : 37.5x30.9x31.6mm(w/Fan & Fan Shroud)
Weight : 95g(w/ Wires)
Applications
Motors : SL BL Motors / SD BL Motors
Vehicles : 1/10th Touring Car & Buggy & Drift Car & F1; 1/8th,1/10th Rock Crawler
KV Rating/T Count :
2S LiPo/6S NiMH: (Touring Car) T≥3.5T, (Buggy) T≥4.5T.
3S LiPo/9S NiMH: (Touring Car) T≥6.5T, (Buggy) T≥8.5T.
