TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

XV-01 PRO Chassis Kit

Rate this item
(1 Vote)
XV-01 PRO Chassis Kit XV-01 PRO Chassis Kit Body, motor, R/C system, battery pack and charger sold separately. Image shows assembled model.

Electric R/C Car Series No.526

XV-01 PRO Chassis Kit

Item No:58526

【 Cross Into the Rally World 】 The XV-01 is a crossover chassis which has been designed to offer dynamic R/C driving on both tarmac and gravel surfaces. It features a front-motor, belt-driven 4WD layout with the gearboxes, drive belt, battery, and R/C unit areas protected by covers against dirt and debris. Holes in the bottom of the chassis further help remove any debris which manages to get onboard to ensure unhindered off-road performance. In addition, detachable wheel well liners help prevent mud and gravel intrusion. Gear differential units enable customization with different viscosities of differential oils.

【 Rally-Spec Suspension 】 The 4-wheel double wishbone suspension is equipped with TRF dampers and ensures plenty of suspension stroke and ground clearance. A long tie-rod steering system reduces bump steer during driving. The large front bumper has an approach angle built in to help deflect rough surfaces. Battery pack is placed longitudinally and can be replaced without detaching body via a hatch on the underside of the chassis. The chassis is also equipped with a transponder stay, rally block tires with inner sponges, and 16-spoke wheels.

【 Specifications 】 ●Chassis Length: 384mm, Chassis Width: 185mm ●Wheelbase: 257mm ●Monocoque Chassis Frame ●Belt-Driven 4WD ●F/R Gear Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●TRF Special Dampers ●Gear Ratio=8.04:1 (When used with kit-standard 68T spur and 22T pinion gears) ●Full Ball Bearings ●Type 540 motor not included ●Requires an electronic speed controller (sold separately)

【 Separately Required Items 】 ●2-channel R/C unit with ESC ●Battery pack and charger ●Batteries for transmitter ●Body ●Motor

Social sharing

Who's Online

We have 610 guests online