TQ R/C & Hobbies

Tamiya Indonesia Championship 2018

  • Seri 1 : 11 Maret 2018 - Sunter International Speedway
  • Seri 2 : 22 April 2018 - East RC
  • Seri 3 : 22 Juni 2018 - To be advised
  • Seri 4 : 22 Juli 2018 - Sunter International Speedway
  • Regulations attached PDF

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

4900mAh 34C 2S1P 7.4V Carbon Edition Hardcase Race Lipo v2

Rate this item
(1 Vote)
4900mAh 34C 2S1P 7.4V Carbon Edition Hardcase Race Lipo v2 4900mAh 34C 2S1P 7.4V Carbon Edition Hardcase Race Lipo v2

Acorn Racing introduces the NEW 4900mAh 34C 2S1P 7.4V Carbon Edition Race Lipo. This new generation of lipos is equipped with 34C constant discharge and 48C Burst Capabilities. Like its fellow siblings, this ROAR Approved Lipo (01 May 2010) is housed in a translucent black durable hardcase in order to keep the cells from being damaged during use.

These cells are specifically developed using state of art LIPB technology for maximum power delivery and unbelievable low internal resistance.
Power is connected through 4mm banana connectors, while the balancer uses a 2mm version.

Sub-c bulges were eliminated from the design so that this outstanding product can go into models with or without sub-c slots in the chasis. This battery configuration is suitable for both touring car and off road buggy. This model of battery has been made more compact to fit all makes of cars without the need for shimming during installation.

We understand that racers do not need a charging harness for every battery they own. Thus, charging harnesses are not included in the package to keep the cost lower
for racers.

Features:

  • Latest LIPB Technology by Acorn Innovations
  • Recommended 1C (4.9Amps) Charge
  • Consistent power delivery
  • Banana Type 4mm Connectors and 2mm for balancing
  • Extremely strong and durable
  • Reliable crash proof hard shell
  • Replaces 7.2 V nimh/nicd stick packs
  • To be charged by Lipo Ready Chargers only

Technical data:
Capacity: 4900mAh
Configuration: 2S1P
Voltage: 7.4 V nominal
Weight approx: 308g
Dimensions approx: 138mmx46mmx25mm
Balancer connector: 3-pins/XH
Charge current: 4.9 Amp / 1C
Continuous discharge: 167 Amps / 34C
Peak discharge: 239 Amps / 48C
Maximum discharge voltage: 6.0 V / Pack
Cells Certification: UN T1-T8 tested
Approval: ROAR Approved

Leave a comment

Make sure you enter the (*) required information where indicated.
Basic HTML code is allowed.

Social sharing

Visitors

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday831
mod_vvisit_counterYesterday940
mod_vvisit_counterThis week4725
mod_vvisit_counterThis month10533
mod_vvisit_counterAll2229330

Who's Online

We have 91 guests online