TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Tyrrell P34 Six Wheeler 1977 Monaco GP

Rate this item
(0 votes)
Tyrrell P34 Six Wheeler 1977 Monaco GP Tyrrell P34 Six Wheeler 1977 Monaco GP Length=430mm Image shows finished model.

Limited Edition R/C Item

Tyrrell P34 Six Wheeler 1977 Monaco GP

Item No:84263

【 Relive the 1977 Monaco GP 】 The Tyrrell P34, the only 6-wheeled F1 race car ever to compete in the history of F1, caused a sensation when it was introduced in 1976. It achieved a 1-2 finish at Rd.4 Swedish GP, which contributed to the team's 3rd place overall finish for the seaon. This is a 1/10 R/C assembly kit model of the Tyrrell P34 that raced at the 1977 Monaco GP. This car had a different rear wing and engine cover than the car which raced at the Japan GP and the model accurately reproduces these features.

【 F103-Based 6-Wheeled Chassis 】 The high performance direct drive 2WD chassis has a semi-double deck layout with 1.5mm thick upper and 2.5mm thick lower FRP plates. The kingpin and coil spring 4-wheel independent front suspension consists of a one-piece lower arm and left/right upper arms. One servo controls the steering of all four front wheels. The rear suspension features a rigid T-bar suspension with a coil spring and friction plate. The spur gear has a built-in ball diff that provides a limited slip effect. In addition, both front and rear wheels are equipped with high-grip sponge tires.

【 Specifications 】 ●Length: 430mm ●Width: 204mm ●Height: 108mm ●Weight: 815g ●Tread: 140mm (Front), 155mm (Rear) ●Tire Width/Diameter: 23/44mm (Front), 45/64mm (Rear) ●FRP Semi-Double Deck ●Horizontally-Mounted Motor, Rear Direct-Drive 2WD ●Ball Differential ●2-Piece Steering Tie-Rod ●Suspension: Kingpin/Coil Spring (Front), T-Bar Rigid (Rear) ●Gear Ratio: 4.5:1 (when used with 14T pinion and 63T spur gears) ●Type 540 Motor ●Requires an Electronic Speed Controller (sold separately)

【 Separately Required Items 】 ●2-channel R/C unit with ESC ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

The information on this page is current as of Feburuary 2, 2012.

Social sharing

Who's Online

We have 628 guests online