TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Page 9 of 174
News
Hong Kong based 1:28 specialists GL Racing has released its new GL Formula One having spent almost 2 years from originating the idea, designing the chassis and to finally completing it.  This newly designed F1 incorporates some innovative features that have not been used in mini F1 in the market.  The chassis has a four independent dampers suspension system with double arms front suspension and the rear camber and toe in adjustable.  With a Gearbox transmission system and ball differential, the Ultra low CG chassis is compatible to both hard and lexan body shells, the chassis kit not including a…
Continuing the roll out of its S15 1:10 buggy body, JConcepts has released versions to fit the 2WD and 4WD kits offerings from Xray, the XB2’24 and the XB4’24.  Debuting at the 2023 1:10 Offroad World Championships in Arizona, JConcepts S15 body is available in both standard and a lightweight option, the body ships with window mask, decal sheet and two of the latest Carpet | Turf | Dirt wings for a quick transition from preparation to racing.  The S15 follows the chassis shape like a glove and the tidy arrangement is free of unwanted gaps.  The centre line roof…
Having released their latest 1:8 GT Nitro chassis back in July, Italian Onroad and Offroad chassis manufacturer WIRC Racing has released the electric version of the kit, the GT4E-R1.  The new car, which the team’s offroad star Marco Baruffolo spent the weekend testing ahead the brand’s ‘Master Cup’ race event at its own WIRC Arena track, has had the weight distribution optimised and features 11 mm lower front and rear suspension for better stability and responsive handling.  The car’s battery mount has been improved getting a new battery stop. View more images here
New from Italian body shell producer Bittydesign comes the Kanjo-S intended for the 1:7 Infraction and Felony kits from Arrma.  With the main intention of offering a body for fans of the most iconic Japanese cars of the 1990s-2000s, the Kanjo-S is based on the Subaru Impreza. Everything is included with the kit which arrives pre-cut.  The body, the wing, the light buckets, the front aero flaps, the enlarged wheel fenders everything is laser-cut to perfection to give the user a premium quality & realistic looking product. View more images here
Leadfinger Racing has released its Retro-mod body and wing set for the 1:24 Losi Micro-B.  Prepare to take a journey back to 1987 with the official LFR Retro-mod conversion for the Losi Micro-B.  This conversion is guaranteed to unlock memories of the golden years of R/C racing at its finest.  Sold in clear and ready for paint, the conversion will include the Retro-mod body, 2 Retro wings, window masks and LFR logo stickers.  To fit the body an aftermarket top plate is required which Leadfinger sell separately for repositioning stock electronics. View rear angle & top plate here
Max Speed Technology (MST) have released their latest 1:10 Competition Drift Car Kit, the FRX RS.  Featuring a new FR-driven chassis design, this maximises the rear axle weight distribution, significantly enhancing acceleration. The FR setup can also achieve more realistic drifting dynamics of a real car.  The car also features a realistic quick-change differential/final transmission system, inspired by real drift racing cars.  An additional 19T metal gear is included along with the standard 19T and 21T plastic gears.  The car also gets a newly designed Reinforced Differential which is equipped with six metal bevel gears for the first time, increasing…
Exotek Racing has released it latest F1 kit, the F1UltraR5 CW which it has designed exclusively for carpet racing.  The California based manufacturer says the ‘Carpet Works’ car is ‘Lighter, leaner and meaner’ that the ‘cutting edge high-performance F1 racing kit’ has evolved from all of the great features of original F1Ultra into a perfected race machine designed specifically for carpet tracks.  Featuring 12 new parts over the previous kit, the inline battery mounting layout, best suited for very high grip tracks with the option to still mount the battery transversely if needed.   View specs & more images here
Continuing to expand its range of detailed 1:10 190mm LeMans Hypercar bodies, MonTech Racing has announced the upcoming release of the A-424.  The body shell, which echoes the lines of the famous French Alpine brand, is super realistic with meticulous attention to detail.  The Italian company’s latest bodyshell is designed to fit both Touring Cars (190mm) and Formula 1 chassis with a 260mm wheelbase.  Constructed from premium 0.75mm polycarbonate, it comes equipped with everything you need to hit the track immediately. Headlight decals, window masks, rear wing fixing screws are all included.  It will be available from early November. View…
In the latest release of their 1:8 Sector Body, Pro-Line has added a version for Team Associated’s RC8B4.1 1:8 Buggy platform.  Released back in August, the Sector features a ground-up redesign to optimise the handling of your buggy in the trickiest of track conditions.  The low-slung design features a laid-back windshield and long center fin for ideal stability and side bite, lowering your lap times.  The overall rake of the body contributes to the planted yet drivable feel of the Sector, while the body has the right amount of clearance around the gearbox, chassis, and bulkhead.  Made in the USA…
New from JConcepts are these Caster Hat Bushings to help level up the look of the RC10B7 from Team Associated.  The all-aluminium, CNC machined items have trick indentations providing styling cues and identifiers to quickly recognise thickness.  Available in blue and black colours, the caster hat bushings arrived packaged including the 1mm and 2mm thickness, most commonly used in dirt racing applications. View Bushing colour options here
Page 9 of 174

News

Social sharing

Who's Online

We have 506 guests online