TQ R/C & Hobbies

1/10 Expert Built Series No.164

XB Holiday Buggy (DT-02 Chassis)

Item No：57864

【 Take another Holiday 】 This is a factory finished R/C model which brings fully up to date the Holiday Buggy, a popular buggy model from the Tamiya 1980s line-up. Whether on the road or the dirt, the 2WD Holiday Buggy provides excellent maneuverability and it features a durable pre-painted resin body with driver figure. The DT-02 chassis features 4-wheel double wishbone suspension and is fitted with bright yellow wheels, and propelled by a powerful Type 540 motor. Front rib and rear spike tires provides buckets of grip.

【 Fun-to-Drive DT-02 Chassis 】 The bathtub type frame chassis features a longitudinal battery layout for lower center of gravity and optimum weight distribution. 4-wheel double wishbone suspension is equipped with coil spring damped units to provide superb off-road traction, while the chassis features a flat underside to enable thrilling skids. A sealed gearbox protects against dust and debris and is equipped with differential gears to ensure smooth cornering.

【 2.4GHz Transmitter included 】 In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only. Transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation.

【 Specifications 】 ●Length: 390mm, Width: 240mm, Height: 164mm ●Wheelbase: 260mm ●Ground Clearance: 26mm ●Rear-Wheel 2WD ●Tire Width/Diameter: 22mm/81mm (Front), 39mm/86mm (Rear)　●Tread: 217mm (Front), 208mm (Rear) ●3-Bevel Differential ●2-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Gear Ratio=15.77:1 ●Type 540 Motor included ●Electronic Speed Controller (Forward/Reverse Type)

【 Separately Required Items 】 ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of August 29, 2013. Specifications are subject to change without notice.

1/10 Expert Built Series No.165

XB Sand Rover (DT-02 Chassis)

Item No：57865

【 Get Roving! 】 This is a factory finished R/C model of the Sand Rover, a buggy which was originally released in 1981. It is matched with the modern 2WD off-road DT-02 chassis with 4-wheel double wishbone suspension which allows fun and versatile driving both on- and off-road. The durable resin open-top body is pre-painted in orange, and a finished driver figure is also included.

【 Fun-to-Drive DT-02 Chassis 】 The bathtub type frame chassis features a longitudinal battery layout for lower center of gravity and optimum weight distribution. 4-wheel double wishbone suspension is equipped with coil spring damped units to provide superb off-road traction, while the chassis features a flat underside to enable thrilling skids. A sealed gearbox protects against dust and debris and is equipped with differential gears to ensure smooth cornering.

【 2.4GHz Transmitter included 】 In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only. Transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation.

【 Specifications 】 ●Length: 390mm, Width: 240mm, Height: 168mm ●Wheelbase: 260mm ●Ground Clearance: 26mm ●Rear-Wheel Drive ●Tire Width/Diameter: 22mm/81mm (Front), 39mm/86mm (Rear)　●Tread: 217mm (Front), 208mm (Rear) ●3-Bevel Differential ●2-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Gear Ratio=15.77:1 ●Type 540 Motor included ●Electronic Speed Controller (Forward/Reverse Type)

【 Separately Required Items 】 ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of August 29, 2013. Specifications are subject to change without notice.

1/10 Expert Built Series No.167

XB Neo Scorcher (TT-02B Chassis)

Item No：57867

【 Burning Inspiration 】 This is a factory-finished modelof the Neo Scorcher, a new R/C racing buggy inspired by The Scorcher, a popular and speedy 4WD racing buggy from the late-1980s Tamiya line-up. Made from durable polycarbonate and featuring a stylish large rear wing, the white and metallic blue body design are based upon the original Scorcher. White wheels are paired with grippy dirt tires for a highly maneuverable off-road buggy that will scorch your rivals!

【 Excellent and Accessible Off-Road Chassis - the TT-02B 】 The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA shock units, giving the car assured handling on rough surfaces. F/R gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. Of course, this off-road model also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.

【 2.4GHz Transmitter included 】 In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only. Transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation.

【 Specifications 】 ●Length: 380mm, Width: 250mm, Height: 145mm ●Wheelbase: 266mm　●Tread: 217mm (Front), 208mm (Rear) ●Bathtub-type Frame ●Shaft-Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Tire Width/Diameter: 32/82mm (Front), 41/82mm (Rear) ●Front/Rear CVA Oil Shock Units ●Gear Ratio = 10.71:1 (using kit-included pinion gear) ●Type 540 Motor ●Electronic Speed Controller (Forward/Reverse Type)

【 Separately Required Items 】 ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of August 29, 2013. Specifications are subject to change without notice.

Tamiya Italeri Series No.14

Italian/German 508CM "Coloniale" Staff Car

Item No：37014

【 A Versatile Customer 】 The 508CM "Coloniale" was a vehicle used during WWII by both Italian and German forces. This 3.6m lightweight, 2 wheel drive vehicle had lithe handling thanks to its effective suspension, could squeeze speeds of up to 90km/h out of the 32hp engine, and was capable of carrying 4 soldiers. It was put to use in a variety of situations and tasks, most notably in North Africa where the Italian Army used it for officers' transportation and reconnaissance activities. Following the Italian surrender of 1943, the Coloniale was commandeered (and in some cases modified) and used in large numbers by the German forces.

【 About the Model 】 1/35 scale plastic model assembly kit of the 508CM "Coloniale". ★Length: 105mm, Width: 42mm. ★The functional flat lines of the Coloniale are recreated faithfully and matched with large-diameter tires. ★Features an excellent recreation of the interior of the vehicle. ★Superbly detailed model beautifully renders the engine. ★Modelers can choose to depict the car with an open or closed engine hood, and also with canvas roof attached or retracted. ★Separate parts such as Notek light are included to depict German version of the vehicle. ★2 Italian soldier figures and 1 German driver figure included. ★Comes with 2 sets of Italian Army markings and 2 sets of German Army markings, plus decals to recreate Italian Army insignia.
※Vehicle parts are a product of Italeri.

The information on this page is current as of August 26, 2013. Specifications are subject to change without notification.

1/25 Tank Series No.8

British Army 46ton Medium Tank Chieftain (Prototype)

Item No：30608

【 A British Powerhouse 】 The British Chieftain tank was the successor to the Centurion model, and was produced from 1963. The heavily-armored hull featured sharply-sloped front and turret front faces, while the firepower was provided by the 55-caliber 120mm main gun, which had a range of up to 4 kilometers. The tank could get around 48km/h out of its 750hp 6-cylinder engine. From the Mk.3/3 versions of the vehicle onwards, improvements were made not only to the powerplant, but also in providing laser range-finders and more. Deployment to units began in the latter half of the 1960s and the Chieftain saw action with not only British armed forces but also their counterparts in Jordan, Oman and other Middle Eastern countries. The Chieftain served with distinction on the front line until its replacement by the Challenger.

【 About the Model 】 ★1/25 scale plastic model assembly kit. Length: 424mm, Width: 140mm. ★The model was designed based on extensive study of the actual vehicle, and accurately replicates its form with 120mm main gun. ★The Horstmann suspension system used by the tank is realistically rendered and features horizontally-placed coil springs to generate authentic movement. ★Resin tracks are fitted with rubber pads and come pre-assembled. ★Other movable parts include the searchlight panel on the left of the turret, the turret itself and the crew hatch. ★Side skirts can be removed even after completion of the model. ★Clear parts are included to depict headlights and periscope.

Information is correct as of August 27, 2013. Specifications are subject to change without notice.

Limited Edition R/C Product

FF-03 EVO Chassis Kit

Item No：84354

【 Born to Race! 】 This chassis pairs the excellent driving feel of FF models with increased cornering control, giving it the potential to race with the best. It utilizes a double deck structure with carbon 2.0mm upper and 2.5mm lower decks for excellent rigidity. The slimline structure optimizes roll characteristics with the battery pack placed on the left and the R/C equipment on the right, and superior stability is provided by the inboard front suspension (using TRF dampers) and rear aluminum bulkhead with aluminum upper mount.

【 Featured Components 】
＜Special Parts＞
●2.5mm-thick Carbon Lower Deck ●2.0mm-thick Carbon Upper Deck ●3.0mm-thick Carbon Rear Damper Stay ●2.0mm-thick Carbon Battery Holder ●Aluminum Rear Bulkhead ●Aluminum Upper Arm Mount ●Aluminum Steering Mount
●Aluminum Steering Bridge ●Aluminum Front Damper Mount ●Aluminum IFS Base

＜Option Parts＞
●Double-Cardan Drive Shaft (44/2pcs.) ●TRF Special Dampers (Hard Black Coating) 4pcs. ●Hi-Torque Servo Saver (Black) ●Clamp Type Aluminum Wheel Hubs (5mm Thick) ●3×42mm Aluminum Turnbuckle Shaft (2pcs.) ●3×32mm Aluminum Turnbuckle Shaft (2pcs.) ●TA06 Lightweight Idler Shaft ●FF-03 Aluminum Counter Gear Shaft ●FF-03 Carbon Motor Stay (L) ●5mm Aluminum Ball Connectors (Blue) ●M Chassis Reinforced Freewheel Axle ●TRF Fluorine-Sealed Bearings (Drivetrain)

【 Specifications 】 ●Chassis length: 381mm ●Chassis width: 187mm ●Wheelbase: 257mm ●Tread: 180mm (Front), 184mm (Rear) ●Carbon Double Deck Frame ●Front-Mounted Motor, Front-Wheel Drive ●Gear Differential ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●TRF Dampers ●Gear Ratio ＝ 6.8:1 ●Requires Motor and Electronic Speed Controller (sold separately)

【 Separately-Required Items 】 ●2-channel R/C system with ESC　●Battery pack and charger　●Batteries for transmitter　●Type 540 Motor ●Body, Tires, Wheels

Information is correct as of August 22, 2013. Specifications are subject to change without notice.

Limited Edition R/C Product

M-05 Chassis Kit Gold Edition

Item No：84359

【 Looks and Plays the Part! 】 This limited edition version of the M-05 chassis simply oozes glamour, from its gold color metal-plated semi monocoque frame and damper stays, to gold anodized aluminum servo horn, steering posts, ball connectors, wheel nuts and more. This model offers more than just great looks, however - it has features such as an aluminum suspension mount with 1°of toe-in as well as front ball connector suspension shafts to offer just the right amount of stroke. Looking good and winning the race: what could be a better combination?

【 M-05 Offers 3 Wheelbase Choices 】 The M-05 chassis features its motor, battery pack, and R/C equipment positioned for optimum weight distribution and a low center of gravity, and requires only simple rebuilding of the rear suspension to achieve three wheelbases: 210mm, 225mm and 239mm. It is also compatible with M-03 and M-05 chassis bodies. 60D radial tires with realistic tread patterns are fitted to the stylish metal-plated 11-spoke wheels for a classy finish.

【 Featured Components 】 ●Aluminum Rear Suspension Mount (1°Toe-In) ●M-06 PRO 3×34mm Ball Suspension Shafts ●M-05 Full Ball Bearing Set ●M-05 Aluminum Steering Post Stay (Gold) ●Aluminum Servo Horn for Hi-Torque Servo Saver (Gold) ●5mm Aluminum Ball Connectors (Gold) ●5mm Aluminum Ball Nuts (Gold) ●φ5.5mm Aluminum Spacers ●4mm Aluminum Flange Lock Nuts (Gold) ●M-05 Aluminum Rear Uprights (Black) ●Hi-Torque Servo Saver (Black) ●C.V.A. Super Mini Oil Shock Unit ●Setting Springs (3 Types)

【 Specifications 】 ●Chassis Length: 299mm (w/239mm Wheelbase), Chassis Width: 165mm ●Wheelbase: 3 Possible Settings: 210mm, 225mm, 239mm ●Tread (F/R): 138mm ●Front Mid-Mounted Motor, Front-Wheel Drive ●3-Bevel Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●C.V.A. Super Mini Oil Dampers ●Gear Ratio = 5.8:1 ●Tire Width/Diameter (F/R): 25/59mm ●Requires Electronic Speed Controller (separately available)

【 Separately Required Items 】 ●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter ●M-Chassis Body and Motor

Information is correct as of August 22, 2013. Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.572

Volkswagen Beetle (M-06 Chassis)

Item No：58572

【 Take a Trip Back in Time to 1967! 】 The distinctive rounded, fun form of the Volkswagen Beetle (Type 1) is a familiar sight. The rear wheel drive car is powered by a rear-mounted flat 4 engine and while it has a no-frills interior, its reliability has endeared it to people across the world. In time, the car would also spawn the "New Beetle", a car sold from 1997 which evoked the Beetle Type 1's original body. More than 21 million Beetles had been produced by the time production came to an end in 2003, an auto industry record and the silhouette of that instantly-recognizable rounded body hardly changed through it all. This is an R/C model assembly kit of the 1967 version of the car, which is widely lauded as one of its greatest versions. The car's unmistakable form is accurately reproduced by the model, and includes metal-plated parts such as the front/rear bumpers and light cases and side mirrors. It runs on the M-06 chassis, which just like the real car runs on a rear-mounted motor and with rear-wheel drive.

【 Improved RR Performance from the M-06 】 The M-06 chassis features a Rear-Mounted Motor, Rear-Drive setup and features a longitudinally-mounted battery pack, with R/C units positioned on either side for optimum balance and a low center of gravity. 4-wheel double wishbone suspension uses metal-plated wheels exactly like those on the real car, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response.

【 Specifications 】 ●Length: 397mm, Width: 163mm, Height: 145mm　●Wheelbase: 239mm (210mm, 225mm, 239mm Adjustable)　●Tread (F/R): 138mm　●Rear-Motor, Rear-Wheel Drive　●3-Bevel Differential Gear　●3-Piece Steering Tie-Rod　●4-Wheel Independent Double Wishbone Suspension　●F/R Friction Dampers　●Gear Ratio=5.8 :1　●Type 540 Motor ●Tire Width/Diameter (F/R): 26mm/59mm　●Requires an Electronic Speed Controller (sold separately)

【 Separately Required Items 】●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of August 22, 2013. Specifications are subject to change without notice.

Semi Assembled Series No.4

1/10 4WD TT-02 Chassis Set (Factory Finished)

Item No：57984

【 Attach Body & Get Straight to Driving! 】 This semi-assembled version of the shaft-driven 4WD TT-02 chassis features pre-installed R/C equipment and assembly already completed, meaning that all you need to do is attach the body of your choice, get a battery pack and charger, and start driving! The TT-02 employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability in conjunction with the 4-wheel double wishbone suspension. Easy-to-maintain front and rear sealed gearboxes are equipped with differentials, and the excellent performance of the TT-02 is matched by its looks, with brake disc-shaped wheel hubs giving the air of a real car and a front bumper support designed to look like that on a racing car. Silver-colored mesh wheels are fitted with radial tires with a realistic tread pattern. The TT-02 is a versatile chassis which requires only simple refitting of existing parts to offer 2 different wheelbase, tread and ground clearance settings, and it also features a motor mount which enables the selection of 10 different gear ratios. The included ESC (Electronic Speed Controller) allows both forward and reverse driving.

【 Featuring 2.4GHz R/C System 】 This kit uses a 2.4GHz R/C system which eliminates the need for crystals, and utilizes a wheel-trigger type transmitter perfect for driving R/C cars. The transmitter is factory-paired with the enclosed receiver, ensuring that they only communicate with each other and there are no crossed signals resulting in loss of model control. Removable grip and trigger covers are also included to enable comfortable use by those with smaller hands.

【 Specifications 】 ●Length: 407mm, Width: 184mm ●Wheelbase: 257mm　●Tire Width/Diameter (Front and Rear): 27/67mm ●Bathtub-type Frame ●Shaft-Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 8.27:1 (10 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) ●Type 540 Motor ●Electronic Speed Controller is pre-installed ●Features carry case-type package

【 Separately Required Items 】 ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

【 Compatible Bodies 】 ●Tamiya TT-02, TT-01, and TT-01 Type-E bodies

Information is correct as of August 23, 2013. Specifications are subject to change without notice.

Limited Edition Scale Model

1/25 Russian Tank Destroyer SU-100

Item No：25104

【 Perfect for Muddy Diorama Situations 】 The SU-100 was a T-34 chassis that came armed with a powerful 100mm gun that could knock out German King Tigers facing front on. Features of the vehicle including its turretless, low silhouette form as well as a long-barreled gun and cylindrical commander's cupola have all been realistically reproduced with this 1/25 scale plastic model kit. In addition, this limited edition model features two unditching log parts to enhance a realistic presence.

【 About the Model 】 ★1/25 scale plastic assembly kit model of the Russian Tank Destroyer SU-100. Length: 358mm. ★Tank’s low silhouette form as well as the long-barreled gun has been accurately reproduced. ★Parts to depict unditching logs and spare fuel tanks also included. ★Hatches can be depicted in either open or closed positions. ★Suspension is movable thanks to metal coil springs. ★Link type resin tracks feature a realistic sag effect. ★One commander figure as well as decals to depict the tank from Russian, Arabian, and Polish armies included.

Specifications are subject to change without notice.