TQ R/C & Hobbies

1/16 R/C Tank Series No.37

Japan Ground Self Defense Force Type 10 Tank Full-Option Kit

Item No：56037

Guaranteed to be Your Type!
This R/C model assembly kit recreates the Type 10 tank, which was officially approved in 2010 and reflects the latest military technology and the needs of the modern Japan Ground Self Defense Force (JGSDF). Full cooperation from the JGSDF led to this highly accurate recreation of the compact Type 10 with 120mm smoothbore gun. Take control of the Type 10’s smooth and powerful forward/reverse movement, a range of turns and pivots, turret rotation and gun elevation. Gun and hull recoil are also recreated. Authentic engine and firing sounds were recorded from the full-size tank and are coordinated with model actions. The main gun and coaxial machine gun flash when fired. A new gun barrel control system factors in model movement and elevation changes to keep main gun automatically trained in a direction set via transmitter. The dedicated gun barrel servo also controls movement after firing, and corrects elevation to prevent contact with turret rear when rotating at low elevation. This model is compatible with Item 53447 Tamiya Battle System (for 1/16 Scale R/C Tanks) (sold separately).

Realistic Mobility
Rear-mounted pre-assembled gearbox features twin Torque-Tuned Type 540 motors for plenty of power. Power transmission mechanics follow those on a full-size tank: one motor controls forward/reverse; the other controls right and left track speed, allowing a realistic range of turns, plus pivoting.

Turret & Main Gun
Turret rotation is accompanied by realistic sounds, and its speed can be controlled via transmitter. When turret is rotated with gun lowered, gun elevation servo automatically raises the barrel to clear hull rear, then returns to original position. When firing, the main gun roars and muzzle flashes thanks to an orange LED in the barrel. Gun barrel recoils after firing via turret interior gearbox, and vehicle kickback is also recreated by drive gearbox. After firing, gun automatically goes to loading position then returns to previous firing angle.

About the Type 10 Tank
Officially approved in 2010, the Type 10 reflects the latest military technology and the needs of the modern Japan Ground Self Defense Force (JGSDF). This state-of-the-art vehicle features a L/44 120mm smoothbore main gun that possesses stabilizers, and an automatic target tracking system that functions with tremendous accuracy even when the Type 10 is on the move. Compatibility with the C4I (command, control, communications, computers, and intelligence) system ensures units operate in harmony. A 1,200hp diesel engine and continuously variable transmission secure impressive mobility in conjunction with the hydraulic semi-active suspension. Modular armor sections on the hull and turret provide top level protection, and can be removed to allow swift transportation of the Type 10. Deployment commenced in 2012, with units undertaking training exercises as the Japan Ground Self Defense Force looked to phase in the Type 10, in place of the Type 74.

Gun Barrel Control System
Circuit boards are mounted in the turret and hull. Inspired by the precision targeting system on the real Type 10, this system - which includes a directional sensor - controls gun elevation and turret direction, training the gun in a direction set by the transmitter, even as the tank moves or climbs, and the turret rotates.

Control the model using a 4-channel transmitter!
Full Operation Set (Item 56036, Japan Market Only) conveniently includes 4-channel transmitter, 7.2V battery pack, and battery charger.

Specifications ★Length: 596mm, Width: 207mm, Weight: 4050g ★Chassis, suspension arms, and drive sprocket are recreated by metal parts for a realistically weighty driving experience. ★Aluminum barrel forms the centerpiece of the accurate depiction of the main gun. ★Pre-assembled tracks are replicated accurately using durable plastic. ★All movements are accompanied by sounds emitted from the speaker unit mounted in the rear of the hull.

Separately Required Items
★4-channel Transmitter　★Battery pack and charger　★4x R6/AA/UM3 Batteries for transmitter

The information on this page is current as of January 22, 2015. Specifications are subject to change without notice.

A sexual intercourse is important for most partnerships. So it is all the more problematic when this no longer happens at all because of ED. Several remedies are generally used to treat sundry types of bacteria, such as gonorrhea and infections of the skin. Certainly, the list is quite big. Have a question about Cialis and "https://your-excellent-choice.com/canadian/female-cialis/? How effective is Cialis? What is the most momentous info you must read about extra savings on cialis? A scientific research about cialis price walmart found that men's most common sexual heartiness problem is ED. There are more than 200 common medications can lead to erectile malfunction, including specific blood tension medicines, hurt medicines, and definite antidepressants. If you have trouble getting an erection, it's vital to see a certified doc before ordering any sort of medications.

1/10 Electric R/C Car Series No.601

R/C Tractor Kumamon Version (WR-02G Chassis)

Item No: 58601

A Model with a Special Driver!
This is an R/C model assembly kit of a tractor with a very special driver - the popular Japanese mascot character Kumamon! The polycarbonate body realistically captures the image of a classic farm tractor with stretched bonnet and large tires, and features a pre-painted Kumamon driver figure ready to perch on the seat at the rear and take the steering wheel. Decals are included to add a host of Kumamon- and Kumamoto-themed illustrations to the model. Features Red 97mm front and 130mm rear wheels.

Fun wheelie action with the rear-wheel drive WR-02G!
The rear wheel drive WR-02G chassis was made for rough riding! Shielded by side frames and held tightly in place by the monocoque frame, the fully-sealed gearbox is well-protected from impact. Power is provided to the rear wheels by a centrally-positioned motor, and transmitted via the differential in the gearbox. The location of the battery pack is key: its longitudinally-placed position high in the rear ensures that when the model accelerates, the front naturally rises in a wheelie. At that point, the wheelie bar on the model's rear stops the model from toppling over, and in doing so maintains a great wheelie! Steering servo is placed along the center of the chassis, and combines with the 2-piece tie rod for precision steering. The suspension is of the tough 4-wheel double-wishbone variety.

Specifications
★Length: 345mm、Width: 253mm、Height: 235mm ★Weight: approx. 1670g (including R/C equipment and battery pack) ★Wheelbase: 170mm ★Tread: 189mm (Front), 195mm (Rear) ★Tire Width/Diameter: 57/97mm (Front), 58/130mm (Rear) ★Resin Monocoque Frame ★Rear-Wheel 2WD ★4-Wheel Double Wishbone Suspension ★Front/Rear Friction Dampers ★2-Piece Steering Tie Rod ★3-Bevel Differentials ★Gear Ratio: 18.3:1 ★Type 540 Motor ★Requires an electronic speed controller (sold separately)

Separately Required Items
★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery Pack & Charger

Information is correct as of January 27, 2015. Specifications are subject to change without notice.

1/10 Expert Built Series No.181

XB R/C Tractor Kumamon Version (WR-02G Chassis)

Item No: 57881

A Factory Finished Model with a Special Driver! This is an R/C model assembly kit of a tractor with a very special driver - the popular Japanese mascot character Kumamon! The pre-painted polycarbonate body realistically captures the image of a classic farm tractor with stretched bonnet and large tires, and features a pre-painted Kumamon driver figure perched on the seat at the rear taking the steering wheel. Decals are applied adding a host of Kumamon- and Kumamoto-themed illustrations to the model. Features Red 97mm front and 130mm rear wheels.

Fun wheelie action with the rear-wheel drive WR-02G!
The rear wheel drive WR-02G chassis was made for rough riding! Shielded by side frames and held tightly in place by the monocoque frame, the fully-sealed gearbox is well-protected from impact. Power is provided to the rear wheels by a centrally-positioned motor, and transmitted via the differential in the gearbox. The location of the battery pack is key: its longitudinally-placed position high in the rear ensures that when the model accelerates, the front naturally rises in a wheelie. At that point, the wheelie bar on the model's rear stops the model from toppling over, and in doing so maintains a great wheelie! Steering servo is placed along the center of the chassis, and combines with the 2-piece tie rod for precision steering. The suspension is of the tough 4-wheel double-wishbone variety.

2.4GHz Transmitter included
In addition to the pre-painted and decorated body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only.

Specifications
★Length: 345mm、Width: 253mm、Height: 235mm ★Wheelbase: 170mm ★Tread: 189mm (Front), 195mm (Rear) ★Tire Width/Diameter: 57/97mm (Front), 58/130mm (Rear) ★Resin Monocoque Frame ★Rear-Wheel 2WD ★4-Wheel Double Wishbone Suspension ★Front/Rear Friction Dampers ★2-Piece Steering Tie Rod ★3-Bevel Differentials ★Gear Ratio: 18.3:1 ★Type 540 Motor ★Requires an electronic speed controller (sold separately) ★Electronic Speed Controller (Forward/Reverse Type)

Separately Required Items
★R6/AA/UM3 batteries for transmitter

The information on this page is correct as of January 27, 2015. Specifications are subject to change without notice.

TRF Series No.285

TRF419 Chassis Kit

Item No: 42285

Top Drawer Performance and Flexibility
With constantly-evolving regulations regarding tires and grip, not to mention improved hardware such as motors and battery packs, it would be no great exaggeration to say that flexibility is one of the key demands placed on modern high end racing chassis. The TRF (Tamiya Racing Factory) team has drawn on all of its experience at top level races around the world to ensure that the TRF419 chassis offers its users a fine level of balance and flexibility.

TRF419: Balanced Evolution for Big Gains on the Track
The TRF419 chassis is balanced in such a way as to get the most possible out of the drive train, which utilizes front and center direct drive, and a redesigned rear gear differential unit. Chassis carbon parts have been redesigned, including upper and lower decks, front/rear damper stays and more. It also features newly-designed and positioned aluminum motor mount and bulkheads, plus a number of of other redesigned major parts. It offers superlative control on a range of track surfaces plus consistent speed and top-end handling response.

Featured Components
●2.25mm-Thick Carbon Lower Deck ●2.0mm-Thick Carbon Upper Deck ●3.5mm Front & Rear Carbon Damper Stays ●Front & Rear Upper/Lower Aluminum Bulkheads ●Aluminum Motor Mount ●Front/Center Direct Drive. Rear Gear Differential Unit ●TRF Dampers (Big-Bore Type) ●Aluminum Suspension Mounts (1C, 1C, 1X, 1F) ●Integrated Aluminum Suspension Mount ●Steel Center Shaft ●Front/Rear Belts
○Aluminum Steering Linkage ○Aluminum Steering Arms ○Front (Double Cardan) & Rear Universal Shafts ○TRF418 Suspension Arms ○Clamp-Type Aluminum Wheel Hubs (4mm Thickness) ○Front & Rear Stabilizers ○Aluminum Turnbuckle Shafts ○Full Ball Bearings
※The ● symbol denotes parts newly-designed for the TRF419 chassis.

Specifications
●Chassis Length: 369mm (without body) ●Chassis Width: 187mm ●Wheelbase: 255mm

Separately Required Items
●Body ●Motor ●Pinion Gear ●Tires ●Wheels ●2-channel R/C system with ESC ●Batteries for transmitter ●Battery Pack and Charger

Information is correct as of January 23, 2015. Specifications are subject to change without notice.

1/24 Sports Car Series No.337

GAZOO Racing TRD 86 (2013 TRD Rally challenge)

Item No: 24337

Taking the Company Car for a Spin
The Toyota 86 was released in April 2012, a front-engine rear-wheel drive sports car powered by a 2.0-liter four-cylinder engine. Since then it has also enjoyed popularity in motorsports, including this GAZOO Racing vehicle entered in the 2013 TRD Rally Challenge series. The series provides a cost-effective way of participating in motorsports, as aside from the addition of safety equipment such as a roll cage and fire extinguisher, cars are little altered from their production versions. Interestingly, it was Morizo (aka Toyota president Akio Toyoda) who piloted this No.104 car to 2 victories from 5 races, good enough to take his class' title.

About the model
★1/24 scale plastic model assembly kit. Length: 177mm, Width: 84mm. ★Accurately captures dynamic form complete with mudflaps and twin exhaust.
★Included decals recreate red and black livery, plus sponsor markings. ★The horizontally opposed 4-cylinder engine is depicted realistically. ★Interior features separate parts recreating roll cage, bucket seats and parking brake.
★Comes with metal transfers to recreate mirror surfaces and emblems.

The information on this page is correct as of January 23, 2015. Specifications are subject to change without notice.

Detail Up Parts Series No.59

1/24 Scale Toyota 86/Toyota GT86 Carbon Pattern Decal Set

Item No: 12659

★Give your 1/24 scale Toyota 86/GT86 model an even racier appearance with this set of carbon fiber pattern decals. They are a delightfully straightforward alternative to the arduous task of recreating carbon pattern using paints. ★Stickers are included to cover the exterior parts such as the roof and bonnet, as well as interior dashboard and door coverings. ★A generic sticker is also included that can be cut an applied as you wish. ★Sheet size: 100mm x 160mm.

The information on this page is current as of January 23, 2015. Specifications are subject to change without notice.

1/35 Military Miniature Series No.342

U.S. 6X6 Ambulance Truck M792 Gama Goat

Item No: 35342

A Unique Life-Saver
M561, fondly known as the "Gama Goat," was certainly a unique vehicle. Formally commissioned in 1966, this amphibious off-roader consisted of 4-wheel tractor and 2-wheel carrier modules, and provided 6-wheel drive thanks to an ingenious articulation joint connecting the two. Among the range of M561 variants, the M792 ambulance was the only vehicle to receive its own unique designation number. Its carrier unit was fitted with a canvas roof with red cross symbols, and within were folding seat extensions on the existing benches to allow transportation of the wounded. A heater was also installed. The M792 could be seen in action alongside its close cousin the M561 during the Invasion of Grenada in 1983.

About the Model
This is a 1/35 scale plastic model assembly kit of the M792 ambulance variant of the Gama Goat. ★Length: 170mm, Width: 62mm. ★The model accurately captures the unique and powerful 2-module form of the vehicle. ★Accurately depicts the M792 interior with folded out seats and heater. ★Separate parts are included to recreate tractor module canvas roof. ★Realistic depiction of the complex 6-wheel suspension is achieved with uncomplicated assembly. ★Articulation joint is recreated using a poly cap and provides authentic movement. ★ Comes with 2 figures including driver, plus 2 marking options. ★ Would look great in a diorama with the M561 (Item 35330) or M151A2 (Item 35332).

The information on this page is correct as of January 27, 2015. Specifications are subject to change without notice.

1/24 Masterwork Collection No.144

LaFerrari (Red) Finished Model

Item No: 21144

Be the 500th!
In March 2013 Ferrari announced their latest flagship model, the LaFerrari, a car which is lucky enough to follow such illustrious forebears as the 288 GTO, F40, F50 and the Enzo Ferrari. The supercar features a carbon composite body with sweeping curves to die for and employs an active aerodynamics system which automatically deploys the rear spoiler and other parts to provide optimal downforce depending on the conditions. It is also loaded with Ferrari's astounding debut hybrid technology: the HY-KERS system was honed in Formula One racing and now features in this road car, harnessing the 800hp 6262cc V12 engine to an electric motor for a breathtaking 963hp. Even if you weren't lucky enough to get one of the mere 499 produced, how about becoming the 500th with this exceptional model?

About the Model
★1/24 scale finished plastic display model of the LaFerrari, the Italian manufacturer's hi-tech supercar. ★Length: 196mm, width: 88mm. ★The model faithfully captures the elegantly sculpted and dynamic form of the car, with a beautiful red painted finish. ★Washing has been applied to door and cowling lines, plus brake discs for an exceptionally realistic finish. ★Photo-etched parts have been extensively applied, boosting authenticity on the nose and rear bumper mesh parts, and more. ★Comes with display stand featuring name plate, plus clear case to help keep the model in mint condition. ※Doors and rear cowling are depicted in closed positions.

The information on this page is current as of January 23, 2015. Specifications are subject to change without notification.

Limited Edition Mini 4WD Product

Fully Cowled Mini 4WD 20th Anniv. White Tires & Green Plated Wheels

Item No：95075

★These special parts celebrate 20 years of Tamiya Fully Cowled Mini 4WD! ★Stylish 5-spoke green plated wheels are paired with hard low-profile white tires featuring blue lettering.

The information on this page is current as of January 22, 2015. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Parts Storage Box Set (Fully Cowled Mini 4WD 20th Anniv.)

Item No：95077

★This special parts case celebrates 20 years of Tamiya Fully Cowled Mini 4WD! ★It is the perfect receptacle to carry your small parts such as screws, nuts and spacers. ★Features Fully Cowled Mini 4WD logo, plus illustrations of "Let's & Go!!" Mini 4WD cartoon characters Retsu and Go Seiba.

The information on this page is current as of January 22, 2015. Specifications are subject to change without notice.