TQ R/C & Hobbies

1/10 Electric R/C Car Series No.585

Alfa Romeo 155 V6 TI Jägermeister (TT-02 Chassis)

Item No：58585

【 A DTM Warrior 】 1994 saw the DTM (German Touring Car Championship) series entry of an Alfa Romeo 155 V6 TI run by Schübel Engineering team and featuring the unmistakable vibrant livery of the German company Jägermeister. The car got its sponsor some podium time in finishing an excellent 3rd position in the final round of the season. This R/C model assembly kit of the car faithfully recreates its form in polycarbonate with wide front bumper spoiler and jutting front and rear fenders. Door mirrors and the unique rear wing are accurately depicted using separate molded parts, while markings and sponsor logos can be applied to the model using the included decals. It is mounted on the easy-to-maintain and customizable TT-02 chassis, which offers highly-controllable shaft-driven 4WD.

【 Adaptable TT-02 Chassis offers balanced shaft driven 4WD 】 The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.

【 Specifications 】 ●Length: 460mm, Width: 182mm, Height: 142mm ●Wheelbase: 257mm　●Tire Width/Diameter (Front & Rear): 27/67mm ●Bathtub-type Frame ●Shaft-Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 8.27:1 (10 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ●Type 540 Motor ●Electronic Speed Controller (ESC) is sold separately.

【 Separately Required Items 】 ●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of January 23, 2014. Specifications are subject to change without notice.

1/48 Military Miniature Series No.77

Russian 1.5ton Cargo Truck Model 1941

Item No：32577

【 Back to Basics 】 A steady factor in the Russian effort during WWII was the 1.5ton cargo truck, which was used for transporting personnel and a range of other duties. It was based upon a U.S. design and received an upgrade with revamped engine in 1938. The 1941 model was a vastly stripped down variant on account of a scarcity of time and metal resources following the German invasion of June 1941, and the ability to produce it quickly and cheaply was key in its integration into Russian military activities.

【 About the Model 】 This is a 1/48 scale plastic model assembly kit of the Russian 1.5ton cargo truck model 1941. ★Length: 107mm, Width: 44mm. ★The stripped-down form of the vehicle is accurately recreated, with depictions of the boxy fenders, curtains used in place of doors, missing right-side headlight, and other economizing design features. ★5 included figures feature a driver, and 4 soldiers which can be positioned on the cargo bed at the back of the truck. ★Comes with a plethora of recreations of small arms and other accessories. ★Why not combine it with other 1/48 scale Russian vehicles, airplanes and figures to make a stunning diorama?

The information on this page is current as of January 27, 2014. Specifications are subject to change without notification.

1/12 Big Scale Racing Car Series No.45

McLaren M23 1974

Item No：12045

【 Breaking New Ground 】 The Coppuck/Barnard-designed McLaren M23 made its debut in 1973 and quickly proved its mettle, leading home the field 3 times that season. It benefited from a highly efficient aerodynamics package, unique front and rear suspension and a powerful Ford DFV engine. The following season, it delivered on its massive potential, piloted to victory in the opening race in Argentina by Denny Hulme, and securing wins in Brazil, Belgium and Canada en route to making a World Champion of Emerson Fittipaldi. The icing on the cake of a dream 1974 season was the maiden Constructor's Championship for the team.

【 About the Model 】 ★This is a 1/12 scale plastic model assembly kit of the 1974 Formula One champion car, the McLaren M23. Length: 375mm, Width: 164mm, Height: 79mm. ★The model faithfully recreates the car's sharp form including large induction pods. ★Moving front suspension features coil springs. ★Turning the steering wheels moves the front wheels via rack and pinion. ★Faithful recreation of the Ford DFV engine even includes fuel pipes and ignition cable. ★Features removable front cowling, cockpit fairings and induction pods, allowing appreciation of the recreations of the car's internal mechanisms. ★Photo-etched parts and seatbelt parts also included. ★Includes high quality Cartograf decals.

Information is correct as of January 27, 2014. Specifications are subject to change without notice.

Masterwork Collection No.136

1/35 Japan Ground Self Defense Force Type 10 Tank 1st Co., 
Tank School Unit, Fuji School Brigade (Finished Model)

Item No：21136

【 The New Tank on the Block 】 This is a finished model of the Type 10 tank, the state-of-the-art latest addition to the Japan Ground Self Defense Force roster. This replica quality model is finished in 2-tone camouflage and comes with weathering pre-applied. Headlights are recreated using clear parts, and periscope lenses have been added.。

【 About the Model 】 ★Length: 273mm. ★Pre-applied weathering gives the model a realistic finish worthy of the detail of its design. ★Can be displayed as-is in its window-type package.

Information is correct as of January 27, 2014. Specifications are subject to change without notice.

Fully-Cowled Mini 4WD Series No.38

Ray Stinger Premium (Super-II Chassis)

Item No：19438

【 Sting when you're Winning 】 This is a premium version of the Ray Stinger, a machine which appeared in the Japanese cartoon "Let's and Go!"as the car of one of the heroes' rivals, Rei Hijikata. The body of the racer has a stylized front cowl dubbed the "stinger cowl", plus other exciting features such as body side ducts and jet aero duct on the rear cowl. The silver scheme is accented perfectly by metallic stickers inspired by the design seen in the original cartoon.

【 Super-II Chassis 】The Super-II chassis offers impressive toughness on a wide frame. Here, it appears in dark blue ABS resin and is matched with silver-colored ABS battery holder and rear stay. The model also features turn switches, double attachment points for the rear stay, and light gun metal-colored EX side stays which provide excellent adaptability. The model includes multiple bumper and rear stay attachment holes to allow a range of set-up options. White 5-spoke wheels are partnered with 26mm-diameter low profile tires, and the model also comes with a 3.5:1 gear and motor.

【 Specifications 】 ●Length: 150mm　●Width: 97mm　●Includes motor　●Snap-together easy assembly

【 Separately Required Items 】 ●R6/AA/UM3 batteries (x2)

Information is correct as of January 24, 2014. Specifications are subject to change without notice.

1/32 Racing Mini 4WD Series No.80

Bear Hawk RS (Super-II Chassis)

Item No：18080

【 Swooping for Victory! 】 This is a high-performance shaft-driven Mini 4WD racer called the Bear Hawk RS. Like its avian namesake, the Bear Hawk RS has a large swooping wing, and it exudes a powerful predator's aura with its stylish black body and glamorous metallic stickers. Its base is the light gray Super-II chassis, which is fitted with matte metal plated large diameter 6-spoke wheels and blue slick tires.

【 Super-II Chassis 】 The Super-II chassis offers impressive toughness on a wide frame. Here, it appears in light gray ABS resin and is matched with blue ABS battery holder and rear stay. The model also features turn switches, double attachment points for the rear stay, and screws to hold the rear gear cover in place. Removing the motor cover allows the installation of a separately sold aluminum motor support. The model includes multiple bumper and rear stay attachment holes to allow a range of set-up options. It also comes with a 4.2:1 gear and motor.

【 Specifications 】 ●Length: 150mm　●Width: 97mm　●Includes motor　●Snap-together easy assembly

【 Separately Required Items 】 ●R6/AA/UM3 batteries (x2)

The information on this page is current as of January 23, 2014. Specifications are subject to change without notice.

Grade Up Parts Series No. 472

FRP Wide Front Plate for Fully Cowled Mini 4WD

Item No: 15472

★This FRP stay can be simlpy applied to any fully-cowled Mini 4WD machine, without the need for any body modifications! Its curved lines were designed to work in tandem with the body. ★Features attachment points for 9, 13, and 19mm rollers. ★Can also be used in conjunction with MA and AR Chassis machines.

The information on this page is current as of January 23, 2014. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

HG Carbon Wide Front Plate for AR Chassis (2mm/Blue Lamé)

Item No: 95004

★Add some sparkle to your AR chassis machine with this carbon front plate, which is designed perfectly to match the contours of the chassis, and features a shimmering blue finish. ★Features attachment points for 9mm, 13mm, and 19mm rollers. ★Why not pair it with Item 95005 for a front and back combination?

The information on this page is current as of January 24, 2014. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

HG Carbon Wide Rear Plate for AR Chassis (2mm/Blue Lamé)

Item No: 95005

★Add some sparkle to your AR chassis machine with this carbon rear plate, which is designed perfectly to match the contours of the chassis, and features a shimmering blue finish. ★Features attachment points for 9mm, 13mm, and 19mm rollers. ★Why not pair it with Item 95004 for a front and back combination?

The information on this page is current as of January 24, 2014. Specifications are subject to change without notice.

Craft Tool Series No.117

Bending Tweezers (for Photo-Etched Parts)

Item No: 74117

★These precision tweezers are excellently-suited to work with fine photo-etched parts such as those made from brass and nickel silver. ★A contact area of less than 1mm enables the picking up and bending of extremely small parts, and the tool can be used to bend along fold lines of up to 10mm in length.

The information on this page is current as of January 27, 2014. Specifications are subject to change without notice.