Limited Edition R/C Product
TA06 MS Chassis Kit
Item No:84352
★This chassis kit represents a further improvement to the popular TA06 chassis. ★Includes tough carbon lower, upper and mechanism decks to lend the chassis additional strength and control at high speeds. ★Features greater drivetrain efficiency on account of its aluminum pulley mount. ★Front employs a double cardan joint shaft and direct coupling. ★Steering servo is placed on the right side of the chassis to facilitate easier cable placement.
Information is correct as of May 23, 2013. Specifications are subject to change without notice.
TRF Series No.252
TRF 101 Chassis Kit
Item No:42252
This R/C formula racing chassis takes advantage of the expert knowledge of the TRF team! ★The tough chassis utilizes carbon parts extensively, one particular part of note being the 1-piece 2.5mm thick carbonupper arm. ★Steering servo is placed longitudinally for sharp response. ★Side links on the pivot ball link rear (PBLR) suspension have 3 attachment points.
Information is correct as of May 23, 2013. Specifications are subject to change without notice.
1/10 Electric R/C Car Series No.563
Ferrari 458 Challenge (TA06 Chassis)
Item No:58563
★The Ferrari 458 Challenge joins the TA06 chassis line-up! ★The TA06 features a Dual-Drive System with belt-driven front and gear-driven rear wheels. Front and rear gearboxes are fitted with gear differentials, while the battery is centrally-positioned. ★Polycarbonate body accurately recreates the racy form of the 458 Challenge, and features separate parts for mirrors and light cases to give a detailed finish.
Information is correct as of May 23, 2013. Specifications are subject to change without notice.
1/10 Electric R/C Car Series No.565
Subaru BRZ (TT-01D Type-E Chassis) Drift Spec
Item No:58565
★This is an R/C model assembly kit of Subaru's FR sports car, the BRZ. ★The polycarbonate body features an accurate recreation of the BRZ's compact and low form with rear diffuser. ★The shaft driven 4WD TT-01D Type-E chassis features resin Super Driftech tires on metal-plated wheels.
Information is correct as of May 23, 2013. Specifications are subject to change without notice.
1/10 Electric R/C Car Series No.569
Lancia Delta Integrale (XV-01 Chassis)
Item No:58569
★This is an R/C model assembly kit of the 1992 World Rally Championship-winning Lancia Delta Integrale. ★The polycarbonate body accurately recreates that of the real car, including sharp-edged blister fenders and roof rear spoiler. ★The belt driven 4WD XV-01 chassis is at home both on road and dirt, and features a front mounted motor.
1/12 Motorcycle Series No.125
Honda NS500 '84
Item No:14125
★1/12 scale plastic model assembly kit of the 1984 version of the Honda NS500, which competed in tandem with its NRS500 sister bike in the WGP. ★Accurately captures points such as the unique 112-degree 500cc V3 engine layout ★Contains decals to depict the bike markings of F. Spencer, R. Mamola, T. Katayama and R. Haslam. ※Decals are product of Cartograf.
Information is correct as of May 23, 2013. Specifications are subject to change without notice.
Masterwork Collection No.130
Red Bull Racing Renault RB6 No.6 (Finished Model)
Item No:21130
★This finished model features exquisite paintwork and markings already applied. ★Camera position, front wing flaps and steering wheel follow M. Webber's set-up. ★Comes complete with an etched aluminum name plate attached to the stand.
Information is correct as of May 23, 2013. Specifications are subject to change without notice.
1/48 MM Collection No.54
German Panzerkampfwagen II (French Campaign) (Finished Model)
Item No:26554
★While compact at only 4.8m in length and 2.2m width, this vehicle contributed to the German efforts at the start of WWII. ★This finished model has weathering effects already applied for a highly realistic finish.
Information is correct as of May 23, 2013. Specifications are subject to change without notice.
1/35 Military Miniature Series No.39
U.S. M3 Tank Lee
Item No:35039
【 Filling the breach 】 The M3 Lee medium tank was the main U.S. counter to the formidable tank forces available to the German army in the early stages of WWII. Before the M3 Lee was developed, the U.S. forces only had light tanks at their disposal as the 37mm gun M2 was already practically obsolete by the time it was ready for mass production. Given time constrictions, the solution chosen was to attach a 75mm gun to the M2's hull and attach the 37mm gun to a swiveling turret; 7.62mm machine guns were added to a further turret to give the new tank a distinctive 3-level form. It was named the M3. Despite problems such as limited rotation of the 75mm gun and the height of the tank making it rather easy to spot, its powerful weaponry and strong armor made it a highly useful stop gap for the Allied forces. It was also used by the British, who gave it the naming 'Lee' (or 'Grant' for versions with a different turret pattern). With the advent of the M4 Sherman, the M3 Lee saw more action in the Pacific Theater, tussling with Japanese forces until the end of the war.
【 Model Specifications 】 ★1/35 scale plastic model assembly kit of the U.S. medium tank M3 Lee. ★Main gun, 37mm gun and 7.62mm machine guns are all moveable. ★Hatches can be attached in open or closed position according to user preference. ★Features faithful reproduction of armor including panel rivets. ★Complex suspension system is accurately depicted. ★Includes 2 marking options and 1 figure.
The information on this page is current as of May 23, 2013. Specifications are subject to change without notice.
We have 660 guests online