TQ R/C & Hobbies

1/10 Electric R/C Car Series No.593

M-05 Ver.II PRO Chassis Kit

Item No: 58593

【 Getting Even More Out of a Top Performer 】 Tamiya is delighted to welcome this new chassis kit, which optimizes the already popular M-05 chassis. The M-05 Ver.II PRO chassis features a newly-designed monocoque frame which makes it compatible with square-shaped battery packs, and also moves the motor position further toward the chassis centerline in conjunction with a new motor plate. Low profile servos can now be installed to give an even lower center of gravity. One-piece suspension arms are highly durable and offer rebound stroke adjustment with the use of a grub screw. To add a stylish finishing touch, the frame and wheels are semi gloss black metal-plated, and the kit also includes option parts such as heat sink bars and an aluminum servo mount.

【 Featured Components 】 ★Semi gloss black metal-plated frame and wheels ★Frame supports square-shaped battery packs and low-profile servos ★One-Piece Suspension Arms (allow rebound stroke adjustment) ★Aluminum Motor Mount 
★DF-03 Heat Sink Bar Set ★M-05 Full Ball Bearing Set ★M-05 Aluminum Steering Posts (Blue) ★M-05 Aluminum Turnbuckle Steering Rods (Blue) ★M-05 Aluminum Servo Mount ★CVA Super Mini Dampers

【 Specifications 】★Length: S=300mm, M/L=307mm ★Width: 165mm ★Wheelbase: S=210mm, M=225mm, L=239mm　★Tread (Front & Rear): 138mm ★Monocoque Frame ★Front-Wheel 2WD ★3-Bevel Differential Gear ★3-Piece Steering Tie-Rod
★4-Wheel Double Wishbone Suspension ★Front & Rear CVA Super Mini Oil Dampers (Clear) ★Gear Ratio = 5.8:1 ★Type 540 Motor (sold separately) ★Electronic Speed Controller (sold separately)

【 Separately Required Items 】★M-Chassis compatible body ★Type 540 Motor ★60D Tires ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery Pack & Charger

Information is correct as of May 28, 2014. Specifications are subject to change without notice.

Limited Edition R/C Product

TB EVO.6 Chassis Kit

Item No: 84379

★The TB EVO.6 is the latest generation in the TB Evolution series, the pinnacle of Tamiya shaft-driven 4WD. ★Features a durable double deck layout with 2.0mm and 2.25mm thickness upper and lower carbon decks. The result is an expert blend of durability and flexibility when cornering. ★The motor is installed in a horizontal position on the left side of the chassis, held in place with a aluminum mount that also incorporates the center bevel. ★The suspension is cushioned by big bore TRF short dampers and supported by TRF418 suspension arms.

Information is correct as of May 28, 2014. Specifications are subject to change without notice.

Limited Edition R/C Product

TB-04 PRO II Chassis Kit

Item No: 84382

【 Smoother Operator 】 The TB-04 PRO II chassis further refines the efficient shaft driven 4WD and excellent handling of the TB-04 PRO. Front and rear suspension arms and uprights now take the same form as those on the high-end TRF418 chassis, allowing swift rebound stroke adjustment via 2mm hex wrench, plus smoother cornering. Front and rear universal shafts allow for efficient power transmission, combined with TRF short dampers plus front and rear gear differential units. Hex screws offer secure attachment and enhanced maintenance.

【 Featured Components 】 ●TRF418 Suspension Arms & Front/Rear Uprights ●Lightweight Universal Shafts (Rear x2) ●Universal Shafts (Front x2) ●Hex Head Screws ●TRF Short Dampers x4 ●Front/Rear 3mm thick Carbon Damper Stays for TRF Short Dampers ●Aluminum Propeller Shaft ●53640 5mm Aluminum Ball Nuts (Blue) ●53642 5mm Aluminum Ball Connectors (Blue) ●53709 Fluorine Coated Suspension Balls ●53869 5mm Aluminum Short Ball Nut (Blue) ●54249 3x32mm Aluminum Turnbuckle Shafts ●54250 3x42mm Aluminum Turnbuckle Shafts ●51000 Hi-Torque Servo Saver (Black) ●Full Ball Bearings

【 Specifications 】 ●Length: 381mm, Width: 185mm ●Wheelbase: 257mm　Tread (Front & Rear): 161mm ●Bathtub-type Frame ●Shaft-Driven 4WD w/Horizontally-Positioned Motor ●Front/Rear Gear Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear TRF Short Dampers ●Gear Ratio = 7.86:1 ~ 5.50:1 (10 total ratios possible) ●Requires Type 540 Motor and Electronic Speed Controller (sold separately)

【 Separately Required Items 】 ●2-Channel R/C Unit with ESC　●Type 540 Motor ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter ●Body, tires, pinion gear

Information is correct as of June 9, 2014. Specifications are subject to change without notice.

1/24 Sports Car Series No.334

Porsche 934 Turbo RSR Vaillant

Item No: 24334

★Now in excellently crafted 1/24 scale: the Vaillant-sponsored Kremer Racing Porsche 934 which had an excellent 1976 racing season. ★The impressive form of the 934 is masterfully recreated, right down to details such as the interior with roll cage, and the chassis underbelly. ★High-quailty Cartograf decals are included in the kit to recreate stripes, sponsor markings and so on. ★Comes with photo-etched parts to add that extra level of detail to this fantastic model.

The information on this page is correct as of May 28, 2014. Specifications are subject to change without notice.

1/35 Military Miniature Series No.337

British Paratroopers w/Small Motorcycle

Item No: 35337

★This exciting set contains parts to construct models of 4 British paratroopers and 2 folding motorcycles. ★The unique form of the folding 2-wheeled vehicles is masterfully captured. ★Minute details such as the spokes and chain are recreated with the aid of photo-etched parts. ★Figures can be assembled in either of two poses; riding the motorcycle, or standing. Modelers can choose between a pair of different arm and head parts.
*Motorcycle models can also be constructed in folded state.

The information on this page is correct as of May 28, 2014. Specifications are subject to change without notice.

Tamiya Italeri Series No.16

German 1ton Half-Track Sd.Kfz.10

Item No: 37016

★The Tamiya-Italeri series welcomes this masterful model of the Sd.Kfz.10, a half-track 1ton truck that belonged to the lightest category of trucks in the German WWII-era system. ★New parts are included to add details to areas such as the underside of the folded-away canvas roof, as well as adding small arms rack in the interior. Parts depicting various tools and stays have all been updated. ★Also features redesigned loop-shaped stay on vehicle rear. ★3 figures and 4 sets of markings have been included.
* Vehicle parts are a product of Italeri. * A plethora of parts depicting jerry cans and more are product of Tamiya.

The information on this page is current as of May 29, 2014. Specifications are subject to change without notice.

Masterwork Collection No.140

1/20 Lotus 25 Coventry Climax No.1 (Finished Model)

Item No: 21140

Trend Setter
The Lotus 25 was a revolutionary entry in the world of Formula One, the Team Lotus-run vehicle being the first car to move away from the then-standard tubular steel space frame and employ a lightweight aluminum monocoque. The design was incredibly economical on space, left and right D-shaped sections plus front/rear bulkheads surrounding the driver's seat and leaving just enough room for them to fit in a position akin to laying in a bath, leading to the frame's being dubbed a "bathtub" type. Powered by the 1.5-liter V8 engine supplied by Coventry Climax, the 25 took three victories in the hands of Jim Clark during its debut 1962 season, the next year winning 7 out of 10 races to make Clark into a dominant champion at the pinnacle of motorsport.

About the Model
★1/20 scale finished plastic display model of the Lotus 25, depicting the car which took victory in the 10th race of the 1963 season in South Africa. ★Length: 193mm, width: 81mm. ★The fine recreation of the cigar-shaped monocoque frame body is finished in a luxurious British racing green. ★Brake pipes around the front and rear of the car have been realistically depicted. ★Superb realism is accented by metal transfers to depict windscreen rivets and metallic stickers to portray side mirrors. ★Engine also includes depictions of spark plug cords. ★Comes with display stand featuring name plate, plus clear case to help keep the model in mint condition. It can even be displayed as-is in the box to protect from damage.

Information is correct as of June 11, 2014. Specifications are subject to change without notice.

Limited Edition Scale Model

1/35 British Tank Sherman VC Firefly (w/6 Figures)

Item No: 25174

★2014 marks the 70th anniversary of the Normandy landings of 6th June, 1944, and this limited edition assembly kit is released to commemorate the occasion. ★The VC Sherman Firefly was a British modification of the iconic U.S. tank, fitted with the powerful British 17-pounder gun. ★This model breathtakingly captures the form of the Firefly, including the long 17-pounder and additional radio equipment box on the rear of the turret. ★Photo-etched parts are included in the kit for realistic depiction of parts such as light guards. ★Comes with 6 figures and 4 marking options. ★Features cementable and paintable track parts.
*Tank model parts are a product of Asuka Model.

Information is correct as of May 29, 2014. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Blast Arrow Black Special (MA Chassis)

Item No: 95020

Black is the New Black
This limited edition release of the Blast Arrow sees the popular vehicle given a color scheme worlds apart from its original design, with black becoming the main theme. The body is molded in smoke-colored ABS resin, and actually allows you to see the inner workings of this Mini 4WD machine even after you've attached the shell. The MA Chassis operates with the double-shaft motor in a midship position, and is molded in black ABS resin, complemented by white low-friction A parts such as the battery holder and rollers. This look is accented by black fin-type wheels fitted with white low-profile tires featuring the lettering TAMIYA SPORTS MINI 4WD PRO. Newly-designed stickers are included to adorn the body of this cool black special car!

The Ultra-Efficient MA Chassis
The MA (Midship AERO) Chassis has its motor in the center, and features a design which focuses upon achieving outstanding aerodynamic performance. It has a gear ratio of 3.5:1, 6 individual low-friction rollers, a rear skid bar and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike.

Specifications
★Length: 156mm ★Width: 97mm ★Includes double-shaft motor ★Snap-together easy assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

The information on this page is current as of June 6, 2014. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Liberty Emperor Premium (Super-II Chassis)

Item No: 95027

The Emperor is Back to Take Over the Throne!
This is a limited edition re-release of the Liberty Emperor machine driven by Jingi Otokogi, the hero of the Japanese cartoon "The Wind Racer! Otokogi". One of its most recognizable characteristics was its low center of gravity and aerodynamically styled body featuring no less than 8 air ducts to help control air flow. Mini 4WD veterans will no doubt also fondly remember the car's headlight and side pontoon motifs. Now, it is released with a white body plus beautifully-complementing red and orange stickers and a cool blue metallic sticker to decorate the cockpit roof.

Super-II Chassis
The Super-II chassis is molded in white ABS resin to match the body color, and it offers increased toughness on a adaptable frame. A sharp contrast is provided by black A parts including the battery holder. Other white parts include the gear cover and large diameter narrow lightweight wheels fitted with black arched tires. Bumpers and rear stay feature multiple attachment points to allow a wide range of settings. Motor and high speed 4.2:1 gears are included.

Specifications
★Length: 150mm ★Width: 97mm ★Motor included ★Snap-on easy assembly

Separately Required Items
★2x R6/AA/UM3 batteries

The information on this page is current as of June 11, 2014. Specifications are subject to change without notice.