TQ R/C & Hobbies

Tamiya Airbrush System No.46

Airbrush Manifold (3 Ports)

Item No：74546

★This joint allows you to split the air feed from your compressor into 3, eliminating the need for fiddly changes even when using a number of airbrushes for the same job. ★Joint sizes: PF1/8 (S)

The information on this page is current as of June 24, 2013. Specifications are subject to change without notice.

Tamiya Airbrush System No.47

Air Hose (1.5m/for HG Air Compressor Revo II)

Item No：74547

★Use to connect airbrushing equipment such as airbrushes and 3-port joint. ★The product is made from exceptionally soft material which makes it easy to handle. ★Joint size: PF1/8 (S). ※Use at pressures of 0.15MPa and under.

The information on this page is current as of June 24, 2013. Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.549

4x4 Monster Truck Agrios (TXT-2 Chassis)

Item No：58549

【 A tough customer 】 This is an R/C model assembly kit inspired by monster trucks, which are highly popular in the United States. The tough body's black side frames feature resin shafts with aluminum inserts, plus aluminum panels. For increased durability, the centrally-located gearbox is reinforced by aluminum beams to its front and rear. The upper frame serves as the mechanism deck and battery holder. The hard-wearing polycarbonate body features big front and rear fenders, while the rear truck bed is depicted in pipe frame style. This model really lives up to its namesake, the Greek leader of the giants, Agrios.

【 The heavy-duty twin motor TXT-2 Chassis 】　This shaft-driven 4WD machine's power comes from the parallel-positioned twin motors in the center of the car and is transferred to the front and rear axles via propeller shaft. Front and rear axle cases contain 3-bevel differential gears and have a 2-level transmission. The chassis is equipped with 4-link rigid suspension, each wheel having dual oil dampers. All link rods are made using resistant aluminum, giving the strength to support the heavy-duty frame. Massive 151mm diameter, 82mm width tires are mounted on metal-plated deep rim wheels and are combined with the suspension to handle even the worst of off-road surfaces.

【 Specifications 】　●Length: 510mm, Width: 344mm, Height: 282mm ●Weight: 3,995g (without R/C mechanism and battery) ●Wheelbase: 330mm ●F/R Tread: 262mm ●F/R Tire Width/Diameter: 82/151mm ●ABS resin box type frame ●Shaft-driven 4WD ●Suspension: Front/Rear 4-link rigid ●Dampers: 2 CVA Oil Shock Units per wheel ●2-Piece Steering Tie Rod ●3-Bevel Differentials ●Gear Ratio: 26.3：1　●Type 540 Motor x2 ●Compatible with twin-motor ESC (sold separately)

【 Separately required items 】　●2-Channel R/C System w/ESC ●Twin motor compatible ESC ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger）

Information is correct as of May 21, 2013. Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.560

Ferrari 458 Challenge (TT-02 Chassis)

Item No：58560

【 A smooth operator 】This is an R/C model assembly kit of the Ferrari 458 Challenge. It is an evolution of the 458 Italia (which was released in 2009) made solely for the single-series racing program. The polycarbonate body captures the flowing, low and wide form of the 458 Challenge, including the smooth curves of the front/rear fenders. Separately-sold headlights and taillights can be installed inside the included light cases. It runs on the shaft driven 4WD TT-02 chassis and features silver-colored mesh wheels with racing slick tires.

【 The adaptable shaft driven 4WD TT-02 Chassis 】　The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms for ease of assembly plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.

【 Specifications 】　●Length: 441mm, Width: 191mm, Height: 114mm ●Wheelbase: 257mm　●Tire Width/Diameter: 27/67mm ●Bathtub-type Frame ●Shaft Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio: 8.27:1 (10 further ratios possible with use of separately-sold pinion) ●Type 540 Motor ●Electronic Speed Controller is sold separately.

【 Separately required items 】　●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of May 21, 2013. Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.564

Toyota Land Cruiser 40 Black Special (Painted Body) (CC-01 Chassis)

Item No：58564

【 Black is always in fashion! 】 This is an R/C model assembly kit of one of the best-known 4WD vehicles across the world, the Toyota Land Cruiser. One of its versions with the greatest longevity was the 40, which enjoyed a production run lasting from 1960 to 1984; now, its boxy form is recreated faithfully by this kit's pre-painted black polycarbonate body with white roof. The unique radiator grille and front bumper are metal-plated parts, while side mirrors are made from tough plastic resin; black metal-plated large-diameter wheels with block tires finish off the car's cool image and ensure it's in its element on rough surfaces. Comes with LEDs to depict front (white) and rear (red) lights.

【 All-Terrain Chassis 】 Excellent ground-hugging, long-stroke suspension system consists of front double wishbone and rear 4-link rigid setups and is equipped with 4 oil dampers. Highly reliable and efficient full-time 4WD system features a front-mounted motor, which transmits power to the front wheels via the gearbox and to the rear wheels via the propeller shaft with universal joints. Front and rear differentials enable smooth cornering. For even greater off-road performance on rough terrain, the rear differential may be locked during assembly. Realistic block-pattern tires are mounted on metal-plated wheels.

【 Specifications 】 ●Length: 426mm ●Width: 195mm ●Height: 227mm ●Weight 1,576g (without R/C equipment and battery) ●Wheelbase: 252mm ●Tread (F/R): 155mm ●Tire Width/Diameter (Front & Rear): 36/94mm ●Ladder Frame Bathtub Type Chassis ●Longitudinally-Placed Motor & Shaft Driven Full-Time 4WD ●Front and Rear 3-Bevel Differential Gears ●Front Suspension: Double Wishbone ●Rear Suspension: 4-Link Rigid ●Front and Rear CVA Oil Dampers ●Gear Ratio = 1:14.67 ●Requires an Electronic Speed Controller (sold separately) ●540 Type Motor included

【 Separately Required Items 】 ●2-Channel R/C System w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger

1/48 MM Collection No.52

Russian Heavy Tank JS-2 Model 1944 ChKZ (Finished Model)

Item No：26552

★The JS-2 tank was built to handle the German Tiger I head-on. This model realistically reproduces the Russian tank's rough metal cast finish on the front area. ★Weathering effects have been applied to crank up the realism a step further. ※Comes in a cube-type package.

The information on this page is current as of May 22, 2013. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Aero Avante Red Special

Item No：94944

【 Freshening up a familiar face 】This is a special Red Edition high performance plastic Mini 4WD assembly kit of the Aero Avante, the first machine from the Mini 4WD REV series which features aerodynamic innovations in not only machine bodies but also the chassis. The body is molded in metallic gray-colored ABS and features red 13mm rollers, underpanel and so on. Matte finish metal-plated 5-spoke wheels use a stylish copper color which is accentuated by the white print on super hard tires. The kit also includes stickers to decorate the machine, and has a gear ratio of 3.5:1.

【 AR Chassis 】 The AR chassis features strengths in all the areas you need to win Mini 4WD races: aerodynamics, ease of maintenance, customizability and so on. It directs air smoothly through the body and out of the back, the cooling effect it has on the motor leading to improved durability. Furthermore, the low-friction plastic bearings it employs have the double benefits of making the chassis lighter-weight and more efficient. Diffuser and underpanel can be removed with a single touch, and the low-friction skid bar fitted to the rear helps keep the machine on tricky courses that feature slope sections.

【 Specifications 】 ●Length: 155mm　●Width: 97mm　●Includes motor　●Snap-together easy assembly

【 Separately required items 】 ●R6/AA/UM3 batteries (x2)

Limited Edition Mini 4WD Product

Super Hard Large Dia. Arched Tires (Black)

Item No：94943

★When compared to kit-standard tires, these tires provide sharper cornering and less tendency to bounce off of the track when landing after jumps. ★Tire walls feature stylish white print.

The information on this page is current as of May 22, 2013. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Avante Mk.III Azure Black Body Set

Item No：94957

★The Avante Mk.III Azure body gets a makeover with this classy black version. Tamiya also took this chance to use tough ABS resin when making the body parts to add strength to your machine. ★Includes marking stickers.

The information on this page is current as of May 22, 2013. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Large Dia. 1-Way Wheel Set (for Super X & XX Chassis, Fluorescent Green)

Item No：94958

★One way wheels are a great way to achieve an even smoother ride with less noticeable slowing during corners. This item can be fitted to Super X and XX chassis without widening the tread. ★The vibrant fluorescent green wheels are fitted with offset tread tires.

The information on this page is current as of May 22, 2013. Specifications are subject to change without notice.