TQ R/C & Hobbies

1/10 Electric R/C Car Series No.592

Rock Socker (CR-01 Chassis)

Item No: 58592

【 Sock it to 'em Good！ 】 This R/C model assembly kit recreates a rock crawling vehicle like those seen in popular U.S. events where the massive machines vie for time or crawling ability over impossible-looking obstacles. The lightweight yet tough polycarbonate racing truck body comes with a host of marking stickers for decoration. The tough CR-01 chassis is up to the rock crawling challenge, its durable ladder frames featuring aluminum side channels and resin cross members as well as a 4-link rigid suspension with oil dampers and progressive springs. The motor is placed in a central position, with planetary gears enabling low-speed shaft-driven 4WD. Front and rear differentials can be locked. Large-diameter tires feature a tread pattern which extends to the sidewalls, and are fitted to beadlock wheels.

【 Specifications 】 ●Length: 435mm ●Width: 265mm ●Height: 215mm ●Weight: 2,309g (not including R/C equipment and battery pack) ●Wheelbase: 288mm ●Tread (Front & Rear): 208mm ●Tire Width/Diameter (Front & Rear): 57/125mm ●Aluminum & Resin Ladder Frame ●Shaft-Driven 4WD ●Front/Rear 3-Bevel Differentials (locked as standard) ●Planetary Gearbox ●Front/Rear 4-Link Rigid Suspension ●Front/Rear CVA Shock Units ●Gear Ratio = 32.4:1 ●Type 540 Motor ●Requires Electronic Speed Controller (sold separately)

【 Separately Required Items 】 ●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of June 2, 2014. Specifications are subject to change without notice.

TRF Series No.177

1/10 TRF201XMW Chassis Kit

Item No：42277

【 Get Your Hands on a Champion 】 The TRF201XM chassis used by the world-famous TRF team in the Off-Road 2WD section of the 2013 IFMAR World Championships, is now available for drivers across the world to drive with the release of this chassis kit! The kit converts the TRF201 into a mid-motor chassis, long-wheelbase setup, making it more suited to high-grip surfaces. Durable aluminum gear case is fitted with either gear differential or ball differrential setup to allow fine adjustment to the track condition you are racing on. Furthermore, rear damper stay is made from 4.0mm thick carbon-fiber and front and rear big bore aeration dampers provide smooth driving on any type of surface.

【 Featured Components 】 ●Long Wheelbase Aluminum Chassis Deck (designed specifically for the chassis) ●Front/Rear Big Bore Aeration Dampers　●Aluminum Gear Case　●Aluminum Motor Plate　●Steel Turnbuckle Shafts　●Carbon Battery Plate　●Carbon Rear Damper Stay　●Universal Shafts with Axle Rings　●Ball Differential　●Gear Differential Unit　●Slipper Clutch

【 Specifications 】 ●Length: 402mm (with body and rear wing, without wheels)　●Width: 236mm　●Wheelbase: 285mm　●3.0mm Thick Aluminum Lower Deck　●Rear-Mounted Motor, Rear-Wheel Drive　●Gear Differential Unit or Ball Differential Gear　●3-Piece Steering Linkage with Titanium Turnbuckle Shafts　●4-Wheel Double Wishbone Suspension　●Big Bore Aeration Dampers　●Gear Ratio＝8.56～9.34 (kit-standard with 23T pinion gear＝8.93：1)　●Full Ball Bearings　●Motor sold separately.　●Body and Rear Wing included.　●Requires an electronic speed controller (sold separately).

【 Separately Required Items 】 ●Type 540 Motor　●Tires such as Item 54185 Dual Block Tires K (4WD/Front, 62/25) and Item 54186 Dual Block Tires K (Rear, 62/35)　●Wheels such as Item 51414 TRF201 Front Dish Wheels and Item 51321 DB01 Dish Wheels (Rear/White)　●2-channel R/C unit with ESC　●Separate type battery pack and charger　●Batteries for transmitter

Information is correct as of June 3, 2014. Specifications are subject to change without notice.

1/12 Motorcycle Series No.129

Ducati 1199 Panigale S

Item No: 14129

Ushering in the Future
Introduced to the world at the Milan Motor Show in 2011, the 1199 Panigale was developed around a monocoque rather than Ducati's traditional trellis-frame. It makes liberal use of famed Italian manufacturer Ducati's race experience and extracts 195hp out of a 1198cc liquid-cooled L-Twin engine. In an inventive twist, the engine itself is part of the bike's frame, and connected directly to the airbox/monocoque, swing arm and seat rail. The result is a lightweight and extremely durable vehicle. A wealth of electronic components helps to control engine output, suspension characteristics and more. The bike's sleek design has won it plaudits and awards from around the world.

About the Model
★Length: 173mm.  ★Kit depicts the bike in Italian version.  ★The construction of the model allows appreciation of the inventive structure of the bike, with engine integrated into the monocoque frame and directly connected to the swing arm, damper unit and so on.  ★Distinctive cowling shapes are accurately reproduced.  ★Side cowlings are attached with small screws and can be removed even after assembly is complete.  ★Features metal damper coil spring on the bike's left side.  ★Tire tread pattern is faithfully depicted.  ★Metal transfers recreate mirror surfaces.  ★Features moving kickstand, and separate racing stand parts.

Information is correct as of May 23, 2014. Specifications are subject to change without notice.

Limited Edition Scale Model

1/20 McLaren Honda MP4/7

Item No: 25171

McLaren's 1992 Warrior
The MP4/7 made its racing bow at the Grand Prix in Brazil, 1992, its high-nosed body married to a new 3.5-liter V12 Honda RA122E/B engine. The car got the most out of the RA122E/B with innovations such as semi-automatic transmission and a drive by wire system that allowed sophisticated engine control. A.Senna's Grand Prix victories in Monaco, Hungary and Italy were complemented by teammate G.Berger's triumphs in Canada and Australia.

About the Model
★1/20 scale plastic assembly model kit of the 1992 car. ★Length: 226mm, Width: 107mm. ★The model accurately depicts the MP4/7, with one-piece front wing, nose cone and lower monocoque part. ★Rear wing includes integrated upper/lower slats and side plates. ★Details such as the V12 engine, horizontally placed transmission and side pontoons are all faithfully reproduced. ★Wheels are attached using highly realistic hex screws. ★Marking options included to depict A.Senna and G.Berger machines.

Information is correct as of June 2, 2014. Specifications are subject to change without notice.

Limited Edition Scale Model

1/20 McLaren Ford MP4/8

Item No: 25172

Pushing Technology Beyond the Limits
Upon its 1993 debut in South Africa, the world was introduced to the McLaren Ford MP4/8 - a combination of aerodynamically superior, high-nosed form and the Ford HB V8 engine. The car employed a number of cutting edge technologies of the age, such as active suspension and a semi-automatic transmission that allowed for optimal gear control tailored to the circuit. It took A.Senna to 5 Grand Prix victories that season, and teammate M.Andretti to a podium finish in Italy.

About the Model
★1/20 scale plastic assembly model of the 1993 car. ★Length: 215mm, Width: 101mm. ★The balanced aerodynamic form of the car has been accurately recreated. ★Rear cowling can be removed after completion of assembly to view the Ford V8 engine reproduction. ★Cockpit side air fences are also included.
★Features ABS resin suspension arms. ★Semi-pneumatic tires faithfully recreate the 15-inch tires. ★Marking options included to depict A.Senna, M.Andretti and M.Hakkinen machines.

Information is correct as of June 2, 2014. Specifications are subject to change without notice.

Mini 4WD PRO Series No.38

Tri Gale (MA Chassis)

Item No:18638

Good Things Come in Threes
The Tri Gale is the latest model to appear on the midship motor MA chassis. As its name hints, the front of the car features a three-pronged look with jutting nose and left/right fenders. The large canopy stretches back to the rear of the car, where it is flanked by left and right fenders. This sharp-looking machine also features racy metallic stickers and cool carbon-pattern markings to accent the side and nose of the car and give it a sporty feel. Silver fin-type wheels are married with 26mm low-profile tires.

The Ultra-Efficient MA Chassis
The MA (Midship AERO) Chassis has its motor in the center, and features a design which focuses upon achieving outstanding aerodynamic performance. It has a gear ratio of 3.5:1, 6 individual low-friction rollers, a rear skid bar and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike.

Specifications
★Length: 156mm ★Width: 97mm ★Includes double-shaft motor ★Snap-together easy assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is correct as of June 3, 2014. Specifications are subject to change without notice.

Grade Up Parts Series No. 475

Mini 4WD 13mm Dia. Roller Ball Bearings (2pcs.) II

Item No: 15475

★Ball bearings are a must-have racing upgrade for Mini 4WD machines, facilitating smoother rotation and helping keep speed and stability as the car zooms around the course. ★Steel casings make for long-lasting, durable parts.
*Outer diameter: 13mm, Inner diameter: 5mm, Thickness: 3mm.

The information on this page is current as of May 29, 2014. Specifications are subject to change without notice.