TQ R/C & Hobbies

1/10 Expert Built Series No.169

XB LaFerrari (TT-02 Chassis)

Item No：57869

【 You Can Be No. 500! 】 The world-famous Ferrari company has a wealth of experience in the high-tech world of Formula One, and that knowledge has been generously applied to the technology used in the LaFerrari, which has a production run of only 499 cars. Its 6,262cc V12 engine is paired with the HY-KERS hybrid system for an impressive 963hp. This is a factory finished R/C model of the car. Its polycarbonate body is pre-painted in a stunning red, and accurately recreates the LaFerrari's dynamic form and deep curves, with faithful depictions of the distinctive side mirror stems. It is mounted on the easy-to-maintain and customizable TT-02 chassis, which offers highly-controllable shaft-driven 4WD. 5-spoke wheels are fitted with racing radial tires. Go ahead, and take the LaFerrari for a spin. It'll be just like becoming the lucky 500th owner!

【 Adaptable TT-02 Chassis offers balanced shaft driven 4WD 】 The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it offers 4-wheel double wishbone suspension plus sealed 4-bevel differentials for a smooth ride. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. The included forward/reverse ESC (Electronic Speed Controller) allows smooth driving.

【 2.4GHz Transmitter included 】 In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only. Transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation.

【 Specifications 】 ●Length: 459mm, Width: 192mm, Height: 118mm ●Wheelbase: 257mm　●Tire Width/Diameter (Front & Rear): 27/67mm ●Bathtub-type Frame ●Shaft Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 8.27:1 ●Type 540 Motor ●Electronic Speed Controller (Forward/Reverse Type)

【 Separately Required Items 】 ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of October 24, 2013. Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.574

GAZOO Racing TRD 86 (TT-02 Chassis)

Item No：58574

【 Let's Go Rallying! 】 This is an R/C model assembly kit of the GAZOO Racing TRD 86, a car which appeared in the final round of the 2012 TRD Rally Challenge series. The polycarbonate body accurately captures the low body and smooth lines of the compact TRD 86, also including a faithful recreation of the car's rear diffuser. The kit includes separate light case parts, while decals are included to depict the markings of this racing rally car. It is based on the controllable and adaptable TT-02 chassis, and fitted with gun-metal colored 6-spoke wheels and racing radial tires.

【 Adaptable TT-02 Chassis offers balanced shaft driven 4WD 】 The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.

【 Specifications 】●Length: 431mm, Width: 190mm, Height: 135mm ●Wheelbase: 257mm　●Tire Width/Diameter (Front and Rear): 27/67mm ●Bathtub-type Frame ●Shaft Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 8.27:1 (10 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) ●Type 540 Motor ●Electronic Speed Controller is sold separately.

【 Separately Required Items 】 ●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of October 24, 2013. Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.583

Egress (2013)

Item No：58583

【 Back, and Ready to Take On Modern Day Competition 】 Tamiya is pleased to welcome back the Egress, successor to the famed Avante. The Avante was originally launched in 1988 and Tamiya took advantage of the experience and know-how garnered by the Tamiya Racing Factory (TRF; founded in 1989) team to make a racing version of the Avante: the Egress. It featured carbon fiber plates made of the material seen on hi-tech racing cars and aircraft, and employed racing parts such as ball diffs, high-capacity oil dampers, and lightweight titanium screws. Now, the shaft-driven Egress receives a makeover to bring it right up to date and unleash a whole new world of potential.

【 Durable shaft-driven 4WD chassis uses a range of carbon parts 】 This shaft-driven 4WD chassis features a longitudinally-positioned motor and full ball bearings, while carbon fiber upper and lower decks ensure that the model has superb strength. Re-designed front and rear ball differentials offer excellent reliability and easy maintenance, working in tandem with the built-in center one-way to provide sure-footed movement. The one-way bearing can be locked. Universal drive shafts feature the same design as those used in the current TRF series parts, in order to maximize power transmission and improve resistance to wear and tear. 4-wheel double wishbone suspension is supported by 4 oil dampers equipped with aluminum cylinders, while the front and rear of the model are fitted with stabilizers. Aluminum front uprights offer excellent reliability, and ball bearings in steering linkage arms combine with 2mm thick carbon fiber plate to offer a linear steering response. The Egress has been truly revamped across the board, and it also features a brushless motor.

【 Specifications 】 ●Length: 430mm, Width: 243mm, Height: 157mm ●Wheelbase: 275mm ●Tread (Front & Rear): 200mm ●Carbon Fiber Double Deck Frame ●Shaft-Driven 4WD ●Polycarbonate Body and Undertray ●Front & Rear Ball Differentials + Center One-Way ●3-Piece Steering Tie Rod ●4-Wheel Double Wishbone Suspension ●Tire Width/Diameter: 32/88mm (Front), 40/88mm (Rear) ●High-Capacity Aluminum Cylinder Oil Dampers ●Gear Ratio: 8.25:1 (When using kit-included 22T pinion) ●Requires Type 540 Motor and Electronic Speed Controller (sold separately)

【 Separately Required Items 】 ●Type 540 Motor ●Electronic Speed Controller (ESC) ●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

1/10 Expert Built Series No.160

XB GAZOO Racing TRD 86 (TT-02 Chassis)

Item No：57860

【 Ready to Rally 】 This is a factory finished R/C model of the GAZOO Racing TRD 86, a car which appeared in the final round of the 2012 TRD Rally Challenge series. The polycarbonate body accurately captures the low body and smooth lines of the compact TRD 86, also including a faithful recreation of the car's rear diffuser. The car's headlights are recreated using polycarbonate light cases. The body is pre-painted in the colorful GAZOO Racing livery of red, black and white, and decals are pre-applied to depict the markings of this racing rally car. It is based on the controllable and adaptable TT-02 chassis, and fitted with gun-metal colored 6-spoke wheels and racing radial tires.

【 Adaptable TT-02 Chassis offers balanced shaft-driven 4WD 】 The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it utilizes 4-wheel double wishbone suspension plus sealed 4-bevel differentials for a smooth ride. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. The included forward/reverse ESC (Electronic Speed Controller) allows smooth driving.

【 2.4GHz Transmitter included 】 In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only. Transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation.

【 Specifications 】 ●Length: 431mm, Width: 190mm, Height: 135mm ●Wheelbase: 257mm　●Tire Width/Diameter (Front & Rear): 27/67mm ●Bathtub-Type Frame ●Shaft-Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 8.27:1 ●Type 540 Motor ●Electronic Speed Controller (Forward/Reverse Type)

【 Separately Required Items 】 ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of October 29, 2013. Specifications are subject to change without notice.

1/35 R/C Tank Battle System Series No. 13

JGSDF Type 10 Tank (w/2.4GHz Control Unit)

Item No：48213

★The JGSDF Type 10 tank is the next exciting entry into the 1/35 R/C Tank Battle System Series ★Features a specially designed lower hull. Turret rotation and main gun elevation/depression gearbox provide realistic movement and are integrated for ease of installation. ★Sounds are produced in conjunction with tank controls, while the firing sound of the gun is accompanied by a muzzle flash. ★Enjoy battles with your friends' tanks!

Information is correct as of October 29, 2013. Specifications are subject to change without notice.

1/14 R/C Tractor Truck Series No.37

Scania R470 Highline (Orange Edition)

Item No：56338

【 Become a Trucker 】 Scania is a world-famous manufacturer of large trucks and buses, and this is a 1/14 scale R/C model of the R470 Highline, a model in their 2005 International Truck of the Year-winning R-Series range. The model features a ladder frame chassis with resin cross members and aluminum side channels, plus suspension with metal leaf springs and friction dampers. The 3-speed assembly transmission allows gear changing via transmitter controls. The characteristic styling of the truck's body is reproduced down to the smallest detail. The cabin tilts forward just like the actual truck and the included grille mesh further enhances the realistic look of the model. Kit-included coupler enables linkage with any of Tamiya's currently available 1/14 scale trailers, and the R470 is compatible with a wide range of Tractor Truck Option Parts as well.

【 A vision in orange 】 The kit includes a range of body parts pre-painted in a vivid orange: the cab, roof, spoiler, side skirts, front fender and more. A clear top coat has been applied to the parts to ensure an excellent-quality finish. The kit requires assembly and painting of some parts in black for you to complete your very own eye-catching orange tractor truck.

【 2.4GHz Transmitter included 】 The 2.4GHz transmitter (included for Japan market only) eliminates the need for frequency crystals, and can be paired with the model's receiver to ensure that the receiver communicates with that transmitter only.

【 Realistic Lights, Sounds, and Vibration 】 Install a Multi-Function Control Unit (included for Japanese market only) to add light, sound, and vibration operation to your R/C truck experience. Engine sounds are digitally recorded from an actual diesel unit, and change to reflect model speed. Together with air discharge, horn, gear shifting, and many other realistic sounds, it gives you the feeling that you are driving the real thing! Headlights, brake lights, fog lamp, hazard lights and turn signal operations are also at your fingertips.

【 Specifications 】 ●Length: 452mm, Width: 187mm, Height: 293mm, Weight (without options): Approx. 3.2kg ●Wheelbase: 272mm ●Tread: 156mm (Front), 138mm (Rear) ●Chassis: Aluminum & Polycarbonate Resin Ladder Frame ●Suspension: Front/Rear Leaf Springs ●Caster Angle: 0°/0°(Front/Rear) ●Camber Angle: 0°(Front & Rear) ●Toe Angle: 0°(Front & Rear) ●Aluminum Friction Dampers (Front & Rear) ●Rear Wheel Drive　●Transmission: 3-Gear Transmission (Gear shifting operated via transmitter) ●Gear Ratio: (1st Gear) 32.49:1, (2nd Gear) 17.76:1, (3rd Gear) 10.66:1 ●3-Bevel Differential Gear ●Motor: Type 540 ●Tire Width/Diameter (Front & Rear): 22/83mm ●Included Items (Japan only): 4-Channel Transmitter & receiver, MFC Unit, Servos x2, Battery Pack & Charger　●Requires eight R6/AA/UM3 batteries for transmitter (sold separately).

【 6 Types of Semi-Trailer Separately Available 】 6 types of trailer including semi-trailer, tank-trailer, and pole-trailer, are currently available. Attach any one of them via the coupler on the Scania R470 to create an exciting combination over a meter in length.

Information is correct as of October 31, 2013. Specifications are subject to change without notice.

1/24 Sports Car Series No.333

LaFerrari

Item No：24333

【 Be the 500th! 】 In March 2013 Ferrari announced their latest flagship model, the LaFerrari, a car which is lucky enough to follow such illustrious forebears as the 288 GTO, F40, F50 and the Enzo Ferrari. The supercar features a carbon composite body with sweeping curves to die for and employs an active aerodynamics system which automatically deploys the rear spoiler and other parts to provide optimal downforce depending on the conditions. It is also loaded with Ferrari's astounding debut hybrid technology: the HY-KERS system was honed in Formula One racing and now features in this road car, harnessing the 800hp 6262cc V12 engine to an electric motor for a breathtaking 963hp. There is sure to be a struggle for potential owners to get their hands on one of the 499 cars to be produced. Even if you aren't lucky enough to get one of the 499, however, how about making your very 500th with this exceptional kit?

【 About the Model 】 ★1/24 scale plastic model assembly kit of the supercar which showcases Ferrari's wealth of technological expertise. ★Length: 196mm. Width: 88mm. ★The model faithfully captures the elegantly sculpted and dynamic form of the car, featuring opening left/right doors and rear cowling. ★The 6,262cc V12 engine, transmission and HY-KERS hybrid system are depicted with great accuracy. ★Monocoque frame and front/rear suspension show incredible attention to detail. ★Mesh is included to recreate front air intake and rear cowling openings. ★Features clear underpanel parts. ★Engine is mounted on a sub-frame integrated into the monocoque. ★Metal transfers included for realistic depiction of emblems. ★HY-KERS batteries faithfully recreated in their position under the seats. ★Comes with masking stickers to aid when painting the model.

The information on this page is correct as of October 28, 2013. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Jolly-Joker Premium (AR Chassis)

Item No：94984

【 Jolly Nice to Meet You... 】 This is a premium version of the Jolly-Joker, a model which first appeared in the Truckin' Mini 4WD Series back in 1990. It cuts a cool figure with its lowered-down truck body finished in black with smoke-colored windows. The car's markings and number are depicted using stickers included in the kit. It is based on the modern AR chassis, which includes screw-attached side catch mounts to enable the attachment of the Jolly-Joker body. The motor and batteries can be attached and detached without removing the body from the chassis. Different-width front and rear small diameter wheels have wire-type spokes finished in gold and are mounted on slick tires.

【 AR Chassis 】 The AR chassis is designed to offer its driver durability, customizability and ease of maintenance, all of which are vital ingredients for a successful Mini 4WD racer. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, performing the vital function of cooling the batteries and motor and extending their effectiveness. The air intakes on the chassis and body are integrated for optimal performance. This high-speed racing chassis also features low-friction plastic bearings to ensure that any loss of power from the engine to the wheels is minimal in nature. The under panel and diffuser can be removed from the model without taking off the body, while a low-friction rear skid bar is fitted to slash time loss experienced on tricky slope sections, and keep the racer on the track where it belongs. Features a 4.2:1 gear ratio.

【 Specifications 】 ●Length: 155mm　●Width: 97mm　●Height: 55mm ●Includes motor　●Snap-together easy assembly

【 Separately Required Items 】 ●R6/AA/UM3 batteries (x2)

The information on this page is current as of October 10, 2013. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

AR Fluorescent Color Chassis Set (Green)

Item No：94997

★A vibrant and bright new look for the popular AR chassis! This fluorescent green color is not used currently used in any other kits, and will really liven up your model. ★A Parts (diffuser, underpanel, and more!) are also included in this set.

The information on this page is current as of October 7, 2013. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

19mm Aluminum Rollers (5 Spokes) w/Plastic Rings (Red)

Item No：94995

★A fantastic combination of lightweight and strong aluminum 5-spoke rollers with cool plastic rings in red. ★Ball bearings are built in for smooth rotation.

The information on this page is current as of October 7, 2013. Specifications are subject to change without notice.