TQ R/C & Hobbies

Limited Edition Mini 4WD Product

Heat Edge Green Special (MA Chassis)

Item No：95069

★The Heat Edge (Item 18636), receives this limited edition re-release with a special Green color make-over. ★The body comes molded in Gun Metal ABS. ★The MA Chassis is molded in Light Gun Metal and Black ABS. ★Fluorescent Green fin type low-profile wheels are fitted with super hard Black tires.

The information on this page is current as of September 5, 2014. Specifications are subject to change without notice.

1/10 Expert Built Series No.166

XB Porsche 911 Carrera RSR (TT-02 Chassis)

Item No：57866

【 1973 - A Year to Remember for Porsche 】 1973 was a dream year for the Porsche 911 Carrera RSR. The legendary Group 4 car won no fewer than 3 international races to go along with 7 domestic wins, and a glorious 12 months was capped with victory in the famed Targa Florio race held in Sicily. This is a ready to run R/C model kit recreating the car, and the polycarbonate body accurately replicates its unmistakable form with wide front and rear fenders. The famous marking scheme can be recreated using paints and the included decals to depict the Martini stripes, numbers, sponsor logos and more. Front and rear 2-piece 5-spoke wheels are mounted with racing slick tires for assured handling to go along with the smooth ride offered by the shaft-driven 4WD TT-02 chassis.

【 Adaptable TT-02 Chassis offers balanced shaft driven 4WD 】 The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it offers 4-wheel double wishbone suspension plus sealed 4-bevel differentials for a smooth ride. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. The included forward/reverse ESC (Electronic Speed Controller) allows smooth driving.

【 2.4GHz Transmitter included 】 In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only. Transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation.

【 Specifications 】 ●Length: 457mm, Width: 204mm, Height: 136mm ●Wheelbase: 251mm　●Tire Width/Diameter: 27/67mm (Front), 32/67mm (Rear) ●Bathtub-type Frame ●Shaft Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 8.27:1 ●Type 540 Motor ●Electronic Speed Controller (Forward/Reverse Type)

【 Separately Required Items 】 ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of October 10, 2013. Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.573

GAZOO Racing TRD 86 (XV-01 Chassis)

Item No：58573

【 It's Rally Good! 】 This is a R/C model assembly kit of the GAZOO Racing TRD 86, a car which appeared in the final round of the 2012 TRD Rally Challenge series. The polycarbonate body accurately captures the low body and smooth lines of the compact TRD 86, also including a faithful recreation of the car's rear diffuser. The kit includes two options to recreate the headlights on the car - decals or separate light case parts - while decals are included to depict the markings of this racing rally car. It is based on the belt-driven 4WD of the XV-01 chassis, and fitted with gun-metal colored 6-spoke wheels and racing radial tires.

【 Rally-Ready XV-01 Chassis 】 The XV-01 chassis offers exciting R/C driving action on both on- and off-road surfaces. It features a front-motor, belt-driven 4WD layout with the gearboxes, drive belt, battery, and R/C unit areas protected by covers against dirt and debris. Holes in the bottom of the chassis further help remove any debris which manages to get onboard, ensuring unhindered off-road performance. Long steering linkage provides stable wheel alignment. In addition, detachable wheel well liners help prevent mud and gravel intrusion. Front and rear gear differential units enable customization with different viscosities of differential oils. Conveniently, the battery can be removed from the underside of the model.

【 Specifications 】 ●Length: 431mm, Width: 190mm, Height: 130mm ●Wheelbase: 257mm ●Tire Width/Diameter: Front & Rear 27/67mm ●Monocoque Chassis Frame　●Belt-Driven 4WD ●F/R Gear Differential Units ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●CVA Shock Units　●Gear Ratio＝8.04:1 (When used with kit-standard 68T spur and 22T pinion gears) ●Full Ball Bearings ●Type 540 Motor ●Requires an electronic speed controller (sold separately)）

【 Separately Required Items 】 ●2-channel R/C system with ESC　●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger

Information is correct as of October 1, 2013. Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.580

LaFerrari (TB-04 Chassis)

Item No：58580

【 Perfect Partners! 】 The world-famous Ferrari company has a wealth of experience in the high-tech world of Formula One, and that knowledge has been generously applied to the technology used in the LaFerrari, which has a production run of only 499 cars. Its 6,262cc V12 engine is paired with the HY-KERS hybrid system for an impressive 963hp. This is an R/C model assembly kit of the car. Its polycarbonate body accurately recreates the LaFerrari's dynamic form and deep curves, with separate parts included to recreate the distinctive side mirrors, plus light cases. It is mounted on the shaft-driven 4WD TB-04 chassis, which features a horizontally-positioned motor and is adorned with sharp 5-spoke wheels on 24mm-width racing radial tires. This cutting edge new chassis is a perfect partner for the eye-catching LaFerrari.

【 The TB-04: Efficient Shaft Driven 4WD with Excellent Handling 】 The TB-04 is an efficient shaft-driven 4WD touring car chassis which also offers its drivers crisp handling, as its main frame has a low center of gravity while reducing contact with the track surface to a minimum. The layout places the battery pack longitudinally on the right with the motor horizontally in the left-rear for superior stability during acceleration. 4-wheel double wishbone suspension employs CVA oil dampers, with an inboard front suspension (IFS) setup. The long steering tie-rod system refined on the TRF417 chassis provides optimized Ackerman steering for on-road racing, while an aluminum propeller shaft and full ball bearings ensure smooth transmission of power, along with front and rear gear differential units.

【 Specifications 】 ●Length: 459mm, Width: 192mm, Height: 113mm ●Wheelbase: 257mm　●Tire Width/Diameter (Front & Rear): 24/64mm ●Bathtub-type Frame ●Shaft-Driven 4WD w/Horizontally-Positioned Motor ●Front/Rear Gear Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension (Front features IFS setup) ●Front/Rear CVA Shock Units ●Gear Ratio = 6.80:1 (with kit-included 25T pinion; 10 further ratios from 7.86:1 to 5.50:1 possible with use of separately-sold pinions) ●Requires Type 540 Motor and Electronic Speed Controller (sold separately)

【 Separately Required Items 】 ●2-Channel R/C Unit with ESC　●Type 540 Motor ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of October 8, 2013. Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.582

LaFerrari (TT-02 Chassis)

Item No：58582

【 You Can Be No. 500! 】 The world-famous Ferrari company has a wealth of experience in the high-tech world of Formula One, and that knowledge has been generously applied to the technology used in the LaFerrari, which has a production run of only 499 cars. Its 6,262cc V12 engine is paired with the HY-KERS hybrid system for an impressive 963hp. This is an R/C model assembly kit of the car. Its polycarbonate body accurately recreates the LaFerrari's dynamic form and deep curves, with separate parts included to recreate the distinctive side mirrors, plus light cases. It is mounted on the easy-to-maintain and customizable TT-02 chassis, which offers highly-controllable shaft-driven 4WD. So go ahead, and take the LaFerrari for a spin. It'll be just like becoming the lucky 500th owner!

【 Adaptable TT-02 Chassis offers balanced shaft driven 4WD 】 The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.

【 Specifications 】 ●Length: 459mm, Width: 192mm, Height: 118mm ●Wheelbase: 257mm　●Tire Width/Diameter (Front & Rear): 27/67mm ●Bathtub-type Frame ●Shaft-Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 8.27:1 (10 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) ●Type 540 Motor ●Electronic Speed Controller (ESC) is sold separately.

【 Separately Required Items 】 ●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of October 4, 2013. Specifications are subject to change without notice.

1/10 Expert Built Series No.163

XB Ford Zakspeed Turbo Capri Gr.5 Würth (TT-02 Chassis)

Item No：57863

【 The Meister of 1981 is Ready to Roll 】 The Ford Zakspeed Turbo Capri Group 5 car featured a 1,427cc four-cylinder DOHC engine matched with a stretched body that was the result of extensive wind-tunnel testing and was far evolved from the original 2-door Capri road version. In the 1981 running of the German Racing Championship (DRM), three years after its initial entry, the car was sponsored by the German auto parts maker Würth and left the rest of the field in its wake as it surged to the Championship. Now, the legendary machine is recreated by this factory finished 1/10 scale R/C model. The wide and low form is accurately reproduced by the pre-painted and decorated polycarbonate body, including the big overhanging front/rear fenders, and the model also features gold 2-piece Mesh wheels, with the rear pair wider than those at the front.

【 Adaptable TT-02 Chassis offers balanced shaft driven 4WD 】 The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it offers 4-wheel double wishbone suspension plus sealed 4-bevel differentials for a smooth ride. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. The included forward/reverse ESC (Electronic Speed Controller) allows smooth driving.

【 2.4GHz Transmitter included 】 In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only. Transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation.。

【 Specifications 】 ●Length: 488mm, Width: 205mm, Height: 124mm ●Wheelbase: 251mm　●Tire Width/Diameter: 27/67mm (Front), 33/67mm (Rear) ●Bathtub-type Frame ●Shaft Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 8.27:1 ●Type 540 Motor ●Electronic Speed Controller (Forward/Reverse Type)

【 Separately Required Items 】 ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of October 2, 2013. Specifications are subject to change without notice.

1/35 Military Miniature Series No.330

U.S. 6X6 Cargo Truck M561 Gama Goat

Item No：35330

【 At Home Off of the Beaten Track 】 Originally commissioned in 1966 as an off-road, amphibious vehicle, the M561 Gama Goat was a 6-wheel drive truck consisting of a 4-wheel tractor and a 2-wheel carrier module. What really set it apart from other vehicles of its type, however, was its employment of an articulation joint between the two modules that allowed them to move independently of one another: a most useful skill when traversing rough terrain. The 14,000 Gama Goats produced up to 1973 were used in a variety of roles by both the U.S. Army and Marine Corps, and were deployed in the fighting in Grenada in 1983, although by the start of the 1990s the Gama Goat had been largely phased out. The former half of its unusual nickname came from Roger Gamaunt, designer of the key articulation joint, and the latter half from its tenacious goat-like climbing ability.

【 About the Model 】 1/35 scale plastic model assembly kit of the M561 Gama Goat. ★Length: 170mm, Width: 62mm. ★The model accurately captures the unique and powerful 2-module form of the M561. ★Articulation joint is recreated using a poly cap and provides authentic movement. ★Includes optional front windscreen and winch parts. ★Realistic depiction of the complex 6-wheel suspension is achieved with uncomplicated assembly. ★Comes with 1 figure and 3 marking options.

Information is correct as of September 18, 2013. Specifications are subject to change without notice.

Military Collection No.7

British LRDG Command Car North Africa (w/7 Figures)

Item No：32407

★The LRDG was a British unit which operated largely in the North African conflict with German forces. ★This model depicts a command car together with 7 LRDG soldier figures in realistic poses, including 2 commanders and a driver. ★The set also includes a number of jerry cans, oil drums, bags and other accessories which will prove invaluable in creating dioramas. ※Some figure parts manufactured by Masterbox Ltd..

The information on this page is current as of September 6, 2013. Specifications are subject to change without notice.

1/18 Challenger Series No.8

McLaren M8A 1968

Item No：10008

【 Orange Tornado 】 The Canadian-American Challenge Cup, popularly known as CAN-AM, was a sports car racing series which featured two-seater open-top vehicles without engine displacement limitations. During the period from 1967 to 1971, Bruce McLaren's machines dominated the competition with five consecutive championship titles. The McLaren M8A introduced in 1968 was the result of efforts to produce the most lightweight and aerodynamically-refined machine. The monocoque chassis featured a rear-mounted engine, giving the M8A almost the same layout as F1 race cars. Downforce was not dependent only on the rear wing, but was generated by the entire wedge-shaped body. Distinctive features of the car were its NACA air ducts and the the 40cm long air funnels on its 620hp 7-liter V8 engine. Denny Hulme and Bruce McLaren drove the car to three and one wins respectively during that season to take the championship.

【 About the Model 】 ★This is a 1/18 scale plastic assembly kit model of the McLaren M8A 1968. ★Distinctive features such as the lip on the rear body fairing and NACA air ducts have been faithfully reproduced. ★Front and rear body fairings are detachable, enabling the creation of a pit area scene. ★Large-displacement V8 with tall air funnels features a high level of realism. ★Cartograf decals to depict B. McLaren's No.4 car and D. Hulme's No.5 car are included. ★Comes with 1 driver figure.

Information is correct as of September 6, 2013. Specifications are subject to change without notice.

Limited Edition Static Model

1/20 McLaren Mercedes MP4-13

Item No：89718

★The champion of the 1998 Formula One season is recreated in 1/20 scale. ★The model authentically recreates the car's high-nosed, sharp form. ★Removable rear cowling parts allow appreciation of the engine, radiator and rear suspension, even after the model is completed. ★Also features faithful depictions of the stepped underside and diffuser. ★Marking options and steering wheels included to recreate the car driven by M.Hakkinen or D.Coulthard.

The information on this page is current as of September 12, 2013. Specifications are subject to change without notice.