TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Page 2 of 331

Rate this item
(0 votes)
Item No:95233 Mini 4WD Limited Edition Products (Parts) BLACK PLATED SCREW SET Limited Edition ★These screws have black metal plating and feature a stylish look. ★The set includes an assortment of lengths of 2mm screws as well as 2mm lock nuts and washers which are often used on Mini 4WD machines. ★Also included are 1.5mm, 3mm, and 6mm aluminum spacers. Screw contents: four each of 2x6mm, 2x12mm, 2x15mm, 2x20mm and 2x25mm screws; two each of…
Rate this item
(0 votes)
Item No:47531 Limited Edition R/C Models No.231 1/10 SCALE R/C NISSAN R91CP Limited Edition This is a welcome return for the assembly kit model of the Nissan R91CP, champion of the 1991 All Japan Sports Prototype Car Endurance Championship (JSPC). ★A polycarbonate body depicts the sleek, aerodynamic form, and is paired with a cockpit set and driver figure. ★The direct drive 2WD chassis utlilizes a composite frame. Information is current as of June 24, 2026.…
Rate this item
(0 votes)
Item No:95190 Mini 4WD Limited Edition Products IRON BEAK (VZ CHASSIS) JAPAN CUP 2026 Limited Edition This assembly kit creates a special Japan Cup 2026 version of the Iron Beak, a high performance Mini 4WD racer. The Iron Beak has distinctive V-shaped form and a beak-like nose section; the body is tinted plastic, and is decorated with the included blue and purple graphic stickers. Molded in green-yellow plastic, many aspects of the VZ chassis can…
Rate this item
(0 votes)
Item No:47519 Limited Edition R/C Models No.219 1/10 SCALE R/C MERCEDES-AMG GT3 EVO (ORANGE PAINTED BODY) (TT-02 CHASSIS) Limited Edition The Mercedes-AMG GT3 is one of the world's most popular Customer Racing cars. Equipped with innovative motorsport technologies such as the optional drop-start function or state-of-the-art aerodynamics, it delivers tremendous reliability and high-level performance. It is characterised by excellent drivability and pioneering safety standards. Powered by an AMG 6.3-liter naturally aspirated V8 engine, the Mercedes-AMG…
Rate this item
(0 votes)
Item No:14014 1/12 Motorcycle Series No.14 1/12 SCALE Honda RS1000 ENDURANCE RACER Limited Edition Honda's Hard-Working 1981 Endurance RacerFrom their endurance racing debut in 1976 until 1980 Honda received excellent service from the dominant RCB1000, but in 1980 it was decided to switch to the RS1000. As a base, it used the CB900F, which itself had heritage from the RCB1000. The RS1000 utilized an air-cooled 4-stroke DOHC 4-cylinder powerplant that in its 999cc 1981 spec…
Rate this item
(0 votes)
Item No:58759 All Electric R/C Car Series No.759 1/10 SCALE R/C FORD F-150 RANGER XLT The R/C model assembly kit recreates the 7th generation model of the Ford F-150, a car with classic linear body design and a tough ladder frame that still retains popularity in the modern day as a classic truck. The model is a re-issue of a Tamiya classic, and features a realistic body molded in ABS plastic, with separately molded parts…
Rate this item
(0 votes)
Item No:35103 1/35 Military Miniature Series No.103 1/35 SCALE GERMAN FIELD KITCHEN Limited Edition During WWII, non-mechanized German units such as the infantry were served their meals by a field kitchen, usually pulled by a team of between two and four horses and providing food for anywhere between 120 and 220 soldiers. They generally consisted of a front limber with space for the driver and storage for ingredients and equipment, plus a trailer with soup…
Rate this item
(1 Vote)
Item No:70266 Educational Construction Series (Sets) No.266 WALKING BRACHIOSAURUS ★This is an assembly kit model of the Brachiosaurus, one of the largest dinosaurs to have walked the earth. ★It is powered by a central motor and gearbox. ★Wooden parts such as the head and tail are pre-cut, and the pre-assembled gearbox is already paired with the motor. ★Just screw and fit parts together to assemble the kit! Separately required items R6/AA/UM3 battery x1 Information is…
Rate this item
(0 votes)
Item No:70265 Educational Construction Series (Sets) No.265 WALKING TRICERATOPS ★This is an assembly kit model of the Triceratops, which is powered by a central motor and gearbox and plods along with its head and tail moving side-to-side. ★Wooden parts such as the horned head and legs are pre-cut with holes already made. ★Simply screw together the parts and fit in the pre-assembled gearbox to build up this kit! Separately required items R6/AA/UM3 battery x1 Information…
Rate this item
(0 votes)
Item No:70264 Educational Construction Series (Sets) No.264 WALKING TYRANNOSAURUS ★This is an assembly kit model of the Tyrannosaurus, one of the most fearsome of the  dinosaurs. ★It is powered by a central motor and gearbox, using links to the power the legs. ★Wooden parts such as the head, tail and legs are pre-cut with holes already made, and the pre-assembled gearbox is already paired with the motor. Separately required items R6/AA/UM3 battery x1 Information is…
Page 2 of 331

Social sharing

Who's Online

We have 651 guests online