TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Page 240 of 318

Rate this item
(0 votes)
Limited Edition Mini 4WD Product Torcruiser Body Parts Set (Carbon Pattern) Item No:94977 ★This lightweight and tough polycarbonate body features a cool carbon pattern to make your machine really stand out! As the pattern is printed on the inside of the body, it will remain in great condition, even if your racer picks up a few bumps and bruises. ★Marking stickers are included. The information on this page is current as of September 2, 2013.…
Rate this item
(0 votes)
Limited Edition Mini 4WD Product AR Reinforced Chassis (White) Item No:94981 ★These tough body parts are made from Polycarbonate-ABS resin, which is tougher than the original kit-included parts. The set includes chassis and A parts. ★The white chassis will really bring out the best in your machine's colorful body. The information on this page is current as of September 2, 2013. Specifications are subject to change without notice.
Rate this item
(0 votes)
Limited Edition Mini 4WD Product Aero Hi-Mount Roller Set (Black) Item No:94982 ★This is a limited edition black version of aero hi-mount rollers, which feature rollers attached to high-downforce large front and rear wings! ★Can be attached to any Mini 4WD chassis. The information on this page is current as of September 2, 2013. Specifications are subject to change without notice.
Rate this item
(0 votes)
Limited Edition Mini 4WD Product HG Heavy Aluminum Wheels for Low-Profile Tires (2pcs.) Item No:94993 ★Fit these high-grade aluminum wheels to add some serious weight to your machine. A set of 2 wheels is some 12 grams more weighty than standard low-profile wheels, with benefits such as improved track-hugging and a lower center of gravity. And that means less flying off of the track. plus a speedier drive! ★Try fitting them to the front or…
Rate this item
(1 Vote)
Limited Edition Mini 4WD Product HG Aluminum Deep Rim Wheels for Low-Profile Tires (2pcs.) Item No:94992 ★These high-quality aluminum wheels feature deepened rims, and are some 7 grams heavier than their resin counterparts, providing natural damping for the machine and making it less likely to fly off of the track. As a further bonus, they will lower your racer's center of gravity for noticeably smoother laps. ★Try fitting them to the front or rear of…
Rate this item
(0 votes)
Solar Mechanics Series No.12 Solar Car Assembly Kit Item No:76012 【 Getting a Helping Hand from the Sun 】 This is an assembly kit of a vehicle which runs using solar energy. It features a cool blue frame, as well as steerable front wheels and a choice of 3 gear ratio settings. Altering the angle of the pole mounts varies the amount of energy generated by the 1.5V・1500mA solar panel, and therefore the speed at…
Rate this item
(0 votes)
1/10 Expert Built Series No.164 XB Holiday Buggy (DT-02 Chassis) Item No:57864 【 Take another Holiday 】 This is a factory finished R/C model which brings fully up to date the Holiday Buggy, a popular buggy model from the Tamiya 1980s line-up. Whether on the road or the dirt, the 2WD Holiday Buggy provides excellent maneuverability and it features a durable pre-painted resin body with driver figure. The DT-02 chassis features 4-wheel double wishbone suspension…
Rate this item
(0 votes)
1/10 Expert Built Series No.165 XB Sand Rover (DT-02 Chassis) Item No:57865 【 Get Roving! 】 This is a factory finished R/C model of the Sand Rover, a buggy which was originally released in 1981. It is matched with the modern 2WD off-road DT-02 chassis with 4-wheel double wishbone suspension which allows fun and versatile driving both on- and off-road. The durable resin open-top body is pre-painted in orange, and a finished driver figure is…
Rate this item
(0 votes)
1/10 Expert Built Series No.167 XB Neo Scorcher (TT-02B Chassis) Item No:57867 【 Burning Inspiration 】 This is a factory-finished modelof the Neo Scorcher, a new R/C racing buggy inspired by The Scorcher, a popular and speedy 4WD racing buggy from the late-1980s Tamiya line-up. Made from durable polycarbonate and featuring a stylish large rear wing, the white and metallic blue body design are based upon the original Scorcher. White wheels are paired with grippy…
Rate this item
(0 votes)
Tamiya Italeri Series No.14 Italian/German 508CM "Coloniale" Staff Car Item No:37014 【 A Versatile Customer 】 The 508CM "Coloniale" was a vehicle used during WWII by both Italian and German forces. This 3.6m lightweight, 2 wheel drive vehicle had lithe handling thanks to its effective suspension, could squeeze speeds of up to 90km/h out of the 32hp engine, and was capable of carrying 4 soldiers. It was put to use in a variety of situations…
Page 240 of 318

Social sharing

Who's Online

We have 483 guests online