TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Page 249 of 318

Rate this item
(0 votes)
Grade Up Parts Series No. 462 Carbon Reinforced G13 & 8T Pinion Gear Set Item No:15462 ★Resin gears are reinforced with tough carbon fibers. ★Contains 8T pinions and G13 gears x4, allowing regular replacement when parts become worn. The information on this page is current as of May 30, 2013. Specifications are subject to change without notice.
Rate this item
(0 votes)
Limited Edition Mini 4WD Product HG Carbon Multi Roller Setting Stay (1.5mm) J-Cup 2013 Item No:94953 This plate is released to commemorate the Japan Cup 2013. It allows the attachment of 9mm, 13mm, and 19mm rollers, and being made from carbon it offers both greater rigidity and a cool look to your Mini 4WD machine! It can also be combined with all types of FRP and aluminum plates, and attached to either the front or…
Rate this item
(0 votes)
Limited Edition Mini 4WD Product HG Carbon Rear Multi Roller Setting Stay (1.5mm) J-Cup 2013 Item No:94954 This carbon stay can be attached to a variety of Mini 4WD machines, and is stronger than standard FPR plates while also providing a cool look. It has attachment positions for 9mm, 13mm and 19mm rollers as well as brake parts and stabilizers, allowing a variety of settings. Compatible with Mini 4WD PRO, Super-II, Super XX, VS, Super…
Rate this item
(0 votes)
Limited Edition Mini 4WD Product 19mm Aluminum Ball-Race Roller Set J-Cup 2013 (Blue) Item No:94955 Released to commemorate the 2013 Japan Cup, these lightweight and strong dish-type 19mm rollers feature the phrase "MINI 4WD JAPANCUP 2013". Built-in 520 ball bearings offer smooth movement. Set includes 2 rubber rings to provide shock absorption, and screws for attaching rollers. The information on this page is current as of May 30, 2013. Specifications are subject to change without…
Rate this item
(0 votes)
Limited Edition Product AR Chassis (Red) Item No:94952 The aerodynamically-advanced AR chassis makes an appearance with parts such as the underpanel, diffuser, rollers and A parts all molded in a vibrant red. The chassis itself is molded in ABS resin, while A parts are made from low-friction POM resin. The information on this page is current as of May 30, 2013. Specifications are subject to change without notice.
Rate this item
(0 votes)
Educational Construction Series Wheel Walker Item No:70210 ★This unique educational construction set uses its wheels to 'walk'. ★Features three crank shaft attachment points on each wheel; using the points furthest from the center enables the model to climb over obstacles up to 50mm in height! ★Chassis folds in the center and is raised or lowered in conjunction with the wheel setting to enable it to clear obstacles. ★Requires 1x separately-sold R6/AA/UM3 battery.
Rate this item
(0 votes)
1/10 Electric R/C Car Series No.549 4x4 Monster Truck Agrios (TXT-2 Chassis) Item No:58549 【 A tough customer 】 This is an R/C model assembly kit inspired by monster trucks, which are highly popular in the United States. The tough body's black side frames feature resin shafts with aluminum inserts, plus aluminum panels. For increased durability, the centrally-located gearbox is reinforced by aluminum beams to its front and rear. The upper frame serves as the…
Rate this item
(0 votes)
1/10 Electric R/C Car Series No.560 Ferrari 458 Challenge (TT-02 Chassis) Item No:58560 【 A smooth operator 】This is an R/C model assembly kit of the Ferrari 458 Challenge. It is an evolution of the 458 Italia (which was released in 2009) made solely for the single-series racing program. The polycarbonate body captures the flowing, low and wide form of the 458 Challenge, including the smooth curves of the front/rear fenders. Separately-sold headlights and taillights…
Rate this item
(0 votes)
1/10 Electric R/C Car Series No.564 Toyota Land Cruiser 40 Black Special (Painted Body) (CC-01 Chassis) Item No:58564 【 Black is always in fashion! 】 This is an R/C model assembly kit of one of the best-known 4WD vehicles across the world, the Toyota Land Cruiser. One of its versions with the greatest longevity was the 40, which enjoyed a production run lasting from 1960 to 1984; now, its boxy form is recreated faithfully by…
Rate this item
(0 votes)
1/48 MM Collection No.52 Russian Heavy Tank JS-2 Model 1944 ChKZ (Finished Model) Item No:26552 ★The JS-2 tank was built to handle the German Tiger I head-on. This model realistically reproduces the Russian tank's rough metal cast finish on the front area. ★Weathering effects have been applied to crank up the realism a step further. ※Comes in a cube-type package. The information on this page is current as of May 22, 2013. Specifications are subject…
Page 249 of 318

Social sharing

Who's Online

We have 497 guests online