TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Page 4 of 327

Rate this item
(0 votes)
Item No:67550 Tamiya Original Goods (Apparel) TAMIYA T-SHIRT (BLACK) 110 The simple yet elegant Tamiya T-shirt is also available in black, with the unmistakable twin star logo emblazoned on the chest and back. Pick which of the nine sizes – from 110 cm through to XXXL - best fits you! ★100% cotton ★Unisex Information is current as of February 17, 2026. Specifications are subject to change without notice.
Rate this item
(0 votes)
Item No:95702 Mini 4WD Station Limited Edition Products MS CHASSIS SET (YELLOW-GREEN) MINI 4WD STATION This set includes center chassis, N-02 and T-01 units, plus A parts molded in stylish yellow-green color ABS plastic that is sure to catch the eye at your local Mini 4WD track. The center chassis uses a turn switch. Information is current as of March 3, 2026. Specifications are subject to change without notice.
Rate this item
(0 votes)
Item No:95701 Mini 4WD Station Limited Edition Products REINFORCED GEAR COVER (for MS CHASSIS) YELLOW-GREEN MINI 4WD STATION Used in place of kit standard gear cover parts, this gear cover is securely affixed with 4 screws, giving greater rigidity than kit standard parts that translates into less flex at high speed. The yellow-green color will add a fresh vibe to your model, and goes great with the chassis set sold as Item 95702. Information is…
Rate this item
(0 votes)
Item No:47515 Special Edition R/C Models No.215 1/10 SCALE R/C MINI COOPER RACING (BLUE PAINTED BODY) (MB-01 CHASSIS) About 5.3 million units of the Mini were produced from 1959 until 2000 - remarkably without major model changes - and this legendary little car even achieved second place in the Car of the Century award for the best cars of the 20th century. Its front-wheel drive layout was rare for its time, and it featured ergonomic…
Rate this item
(0 votes)
Item No:15550 Mini 4WD Grade-Up Parts No.550 HG CARBON BRAKE STAY (1.5mm) Getting your brake setup right is particularly key on undulating Mini 4WD circuits, and this lightweight, rigid 1.5mm thickness carbon fiber brake stay will help you do just that. There is plenty of space to stick your brake sheet on, and its shape is designed to keep out of the way of rollers while giving you plenty of holes to fix mass dampers…
Rate this item
(0 votes)
Item No:87238 Cement & Putty No.238 TAMIYA CEMENT (LOW ODOR) As its name suggests, this water-based cement has been engineered to have less odor. It is designed for use on styrene plastic parts, and comes in a square bottle with a brush on the inside of the cap. Used in partnership with Tamiya Extra-Thin Cement (Low Odor), it will take care of your plastic modeling needs. ★Contents: 40ml. Information is current as of January 28,…
Rate this item
(0 votes)
Item No:35393 1/35 Military Miniature Series No.393 1/35 SCALE GERMAN SCHWIMMWAGEN TYPE 166 (WIDE WHEEL VERSION) The 1/35 scale Military Miniature Series now welcomes the wide wheel version of the Schwimmwagen Type 166. The model features realistic depictions of the suspension and engine, with multi-part renderings of the 200mm wide wheels. Accessories such as the windshield cover, MG34 machine gun and Panzerfaust anti-tank weapon are joined by driver and officer figures. Information is current as…
Rate this item
(0 votes)
Item No:47358 Special Edition R/C Parts No.58 TOP-FORCE (2017) HIGH-CAPACITY DAMPER SET (4PCS.) Upgrade the dampers on your Top-Force (2017) buggy with this set of oil filled aluminum cylinder dampers. Alter the position of the spring retainers to fine-tune spring tension, and switch between 2-, 3- and 4-hole pistons for further setup options. These dampers are also compatible with Manta Ray family buggy models. The set also includes small parts for attachment and #400 damper…
Rate this item
(0 votes)
Item No:15549 Mini 4WD Grade-Up Parts No.549 HG CARBON WIDE REAR PLATE (2mm) (SLIDING DAMPERS) This is a rigid 2mm thickness carbon plate with holes that let you attach 9mm, 13mm, 17mm and 19mm rollers in wide positions. Not only a roller stay, it can also be used in place of the aluminum stay in Item 15467 Wide Rear Sliding Damper, giving your car a racier look with its carbon fiber pattern and white printed…
Rate this item
(0 votes)
Item No:24376 1/24 Sports Car Series No.376 1/24 SCALE 1978 FORD ZAKSPEED CAPRI TURBO ★A welcome return for this assembly kit plastic model of the Ford Zakspeed Capri Turbo which was a major player in DRM (Deutsche Rennsport Meisterschaft) racing in the 1970s. ★The low and wide form is captured in style. ★Features a realistic cockpit with roll cage. ★Wheels come with optional aero discs and are paired with sold synthetic rubber tires. Information is…
Page 4 of 327

Social sharing

Who's Online

We have 246 guests online