TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Page 5 of 259

Rate this item
(0 votes)
TRF Series no.264 1/10 R/C TA07 MSX Chassis Kit Item No: 42364 Superlative Traction, Awesome AdaptabilityThis R/C chassis assembly kit refines the high performance single belt-driven 4WD TA07 MS even further! The included choice of 2.25mm thickness carbon fiber and 2mm thickness aluminum lower decks gives you great flexibility of setup, while the two-piece 2mm thickness vertical upper deck offers a sublime balance of pitch and roll flex, and two motor positions give you freedom…
Rate this item
(0 votes)
Electric R/C CarSeries no.686 1/10 R/C VQS (2020) Item No: 58686 Away!This R/C model assembly kit is an updated re-release version of a 1988 buggy from the Tamiya back catalog, which inherited its make-up from the legendary race-oriented Avante. The forward cockpit body design - and the rear wing - are molded in lightweight polycarbonate and pre-painted black, pre-cut with body mount holes pre-made to save on some preparation work. An ABS plastic monocoque frame…
Rate this item
(0 votes)
1/14 R/C Truck Series no.64 Scania R470 (Silver Edition) Item No: 56364 ★This R/C model assembly kit depicts Swedish manufacturer Scania's R470, which was winner of the prestigious Truck of the Year award in 2005. ★The highly realistic body comes pre-painted in silver, partnered with a durable chassis featuring metal parts, and allowing gear changes via transmitter. ★Length: 452mm, width: 187mm, height: 293mm. ★Motor is mounted over the front axles, and provides power to the…
Rate this item
(0 votes)
Electric R/C Car Series no.683 1/14 R/C Mercedes-Benz Race Truck Actros MP4MB Motorsport (TT-01 Type-E) Item No: 58683 ★This is an R/C model assembly kit recreating the Actros MP4 familiar to fans of the popular European truck racing circuit. ★Three-piece cab, front bumper and body are molded in polycarbonate, with stickers recreating the logos and livery. ★The model is based upon the proven shaft-driven 4WD of the TT-01 Type-E chassis. ★3-piece steering tie-rod setup gives…
Rate this item
(0 votes)
Special Edition R/C Product 1/10 R/C Volkswagen Type 2 (T1) Flower Power (M-05) Item No: 47453 A True LegendThis R/C model assembly kit creates a special flower power version of the "23-window" type of the much-loved first generation (T1) Volkswagen Type 2, known as the Volkswagen Bus to many of its legions of fans, with an accurate polycarbonate body in detailed 1/10 scale. Stickers are included to apply the distinctive, hippy-inspired design motifs on the…
Rate this item
(0 votes)
Special Edition R/C Product VQS (2020) High-Capacity Damper Set Item No: 47455 ★This set of oil dampers is a great fit for the VQS (2020) buggy. ★High quality aluminum cylinders are fitted with an oil seal and offer extremely smooth damping. ★A clamp type, screw-actuated spring retainer allows fine tuning of damper performance. ★Front dampers are equivalent to CVA mini size, and rear to CVA short size. ★Four springs and #400 damper oil are also…
Rate this item
(0 votes)
Hop-Up Options no.1972 Buggy Light Pod Set for LEDs Item No: 54972 This set includes four each of round and square light pods with plastic pods and polycarbonate lens. Separately sold Item 53909 Tamiya LED Light Unit (TLU-01) gives your model super realism with lights turned on. This is compatible with Comical buggies series, the Hornet, and Buggy Champ. Screws, washers and nuts are included.※Please note that cement may be required to attach to some…
Rate this item
(0 votes)
Hop-Up Options no.1974 Clear Colored Stickers (Red, Orange, Yellow) Item No: 54974 ★Translucent red, orange and yellow stickers can be used on various lights for super realism, and no worries about inconsistency of finish that can occur if using paint. ★Cut to desired size and apply to the model. ★Sticker sheet size: 400mm x 140mm. Information is current as of October 5, 2020. Specifications are subject to change without notice.
Rate this item
(0 votes)
Hop-Up Options no.1978 CC-02 Reinforced Rear Drive Shafts Item No: 54978 ★These durable shafts keep their shape under pressure and have superior fit, for smooth and efficient rotation. ★4mm E-rings for attachment are also included. ★Parts have a stylish matte black plated finish. Compatible ChassisCC-02 Chassis*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Information is current as of October 5, 2020. Specifications…
Rate this item
(0 votes)
Hop-Up Options no.1980 SW-01 Wheelie Bar Ball Caster Item No: 54980 ★Ball caster makes for smooth motion, enhancing steered wheelies when used with separately sold Item 54898. ★Use with Item 54950 is recommended. ★Contains two 13/32-inch balls, three magnets and four stainless steel shafts. Compatible ChassisSW-01 Chassis*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Information is current as of October 5, 2020.…
Page 5 of 259

Social sharing

Visitors

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday3484
mod_vvisit_counterYesterday4713
mod_vvisit_counterThis week21620
mod_vvisit_counterThis month100000
mod_vvisit_counterAll5302670

Who's Online

We have 367 guests online