TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Page 6 of 327

Rate this item
(1 Vote)
Item No:22102 Hop-Up Options No.2102 TAMIYA BRUSHLESS SENSOR CABLE SOFT (16cm) This is a soft, flexible sensor cable for use with Tamiya brushless motors and electronic speed controllers (ESCs). That flexibility will let you get your chassis wiring nice and neat. Three different length products are available, each with TAMIYA printed on the sheath. ★Length: 16cm. Information is current as of November 11, 2025. Specifications are subject to change without notice.
Rate this item
(0 votes)
Item No:22101 Hop-Up Options No.2101 TAMIYA BRUSHLESS SENSOR CABLE SOFT (12cm) This is a soft, flexible sensor cable for use with Tamiya brushless motors and electronic speed controllers (ESCs). That flexibility will let you get your chassis wiring nice and neat. Three different length products are available, each with TAMIYA printed on the sheath. ★Length: 12cm. Information is current as of November 11, 2025. Specifications are subject to change without notice.
Rate this item
(0 votes)
Item No:22100 Hop-Up Options No.2100 TAMIYA BRUSHLESS SENSOR CABLE SOFT (9cm) This is a soft, flexible sensor cable for use with Tamiya brushless motors and electronic speed controllers (ESCs). That flexibility will let you get your chassis wiring nice and neat. Three different length products are available, each with TAMIYA printed on the sheath. ★Length: 9cm. Information is current as of November 11, 2025. Specifications are subject to change without notice.
Rate this item
(0 votes)
Item No:12032 1/12 Big Scale Racing Car Series No.32 1/12 SCALE Honda RA273 (w/PHOTO-ETCHED PARTS) Honda started appearing in Formula One races in 1964, and in that August's German Grand Prix they debuted their RA271, which had its 1.5-liter 60-degree V12 engine in a novel transverse layout. The following year - the last for 1.5-liter cars - it was succeeded by the RA272, which in Richie Ginther's hands memorably took Honda's maiden victory at the…
Rate this item
(0 votes)
Item No:95694 Mini 4WD Special Edition Products MINI 4WD NEW YEAR'S EDITION "YEAR OF THE HORSE 2026" This assembly kit creates a special edition Mini 4WD racer which celebrates the Year of the Horse, the Chinese zodiac for 2026. The wedge-shaped body comes molded in a bold shade of red and is decorated using the stickers in the kit, which have a decidedly celebratory air. Its horse driver figure comes pre-assembled and painted for your…
Rate this item
(0 votes)
Item No:95698 Mini 4WD Special Edition Products MINI 4WD SANTA CLAUS (RED RACER) This assembly kit creates the Mini 4WD Santa Claus (Red Racer), an exciting car with other than Santa himself at the wheel! The buggy design body is is pretty sleigh-like and is molded in red plastic; the Santa Claus figure comes already assembled and painted. This model uses the lightweight VS chassis with red and white employed for a festive air. Stickers are…
Rate this item
(1 Vote)
Item No:67559 Tamiya Original Goods (Apparel) TAMIYA WRISTBAND (BLACK) Whether as a fashion accessory or sporting wear (or even a little of both!), these stylish wristband prominently featuring the Tamiya twin star logo is sure to be a wonderful addition to your wardrobe! 100% cotton, it is not only exceedingly comfortable and well-fitting, it swiftly absorbs sweat and allows you to play sports with minimal distraction.★100% Cotton. One wristband measures 85mm x 75mm. Information is…
Rate this item
(0 votes)
Item No:70267 Educational Construction Series (Sets) No.267 ROLLING ROBOT (2-CHANNEL IR REMOTE CONTROL) This assembly kit creates a robot operated by infrared controller. Rolling Robot has two big hemispherical wheels, gearboxes, two motors and receiver, and offers the following motion: forward, reverse, right and left turns and pivot turns. LEDs light up, and speed can be adjusted to 16 levels. Everything needed is included for easy snap-fit/screw-together assembly. Specifications●Length: 120mm/160mm with arms, width: 130mm, height:…
Rate this item
(0 votes)
Item No:47523 Special Edition R/C Models No.223 1/14 SCALE R/C MERCEDES-BENZ AROCS 4151 8x4 TIPPER TRUCK (CANDY GREEN EDITION) The Arocs series is a line of heavy-duty models introduced in 2013 by the world’s leading truck manufacturer, Daimler Truck AG. This R/C model assembly kit recreates the Arocs 4151 8x4 dump truck (gross vehicle weight: 41t), which runs on a 12.8-liter turbocharged inline-6 engine capable of 510hp. ●The highly realistic polystyrene body has been pre-painted…
Rate this item
(0 votes)
Item No:47522 Special Edition R/C Models No.222 1/10 SCALE R/C THE GRASSHOPPER BLACK EDITION This assembly kit creates a special Black Edition of The Grasshopper, a legend among Tamiya off-road vehicles. Length: 389mm, width: 223mm, height: 135mm, approximate weight: 830g. ●An ABS monocoque chassis is paired with The Grasshopper body molded in black polystyrene. ●Front swing axle and rear rigid coil-sprung suspension make The Grasshopper right at home on bumpy terrain. ●The gearbox is sealed…
Page 6 of 327

Social sharing

Who's Online

We have 131 guests online