Tamiya Indonesia Championship 2019
- Seri 1 : 24 Feb 2019 - Sunter International Speedway
- Seri 2 : 31 Maret 2019 - Sunter International Speedway
- Seri 3 : 28 April 2019 - East RC
- Seri 4 : 07 Juli 2019 - Sunter International Speedway
- Regulations attached PDF
COMING SOON
COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….
Hobby Wing
TQ R/C AND HOBBIES IS NOW
A DISTRIBUTOR FOR HOBBY WING PRODUCTS
Special Edition R/C Parts Avante (2011) Torque Splitter Set Item No: 47389 ★Protect your gears from sudden impact and shocks with this set. ★Design allows access to ball differential while it is fixed to the model. ★Torque splitter adapts for differences between front and rear wheel speed, for smooth braking and high-speed cornering. Information is correct as of November 1, 2018. Specifications are subject to change without notice.
Special Edition R/C Product TB-05 Aluminum Lower Bulkhead Item No: 47391 ★This component is installed in place of kit standard A3 parts. ★Precision aluminum part boosts drivetrain efficiency and allows attachment of stabilizers via ball bearing for smooth performance. ★Features a cool black anodized finish. ★Set also contains two 740 ball bearings, stabilizer stoppers, and grub screws. Compatible ChassisTB Evo.6, TB-05 PRO, TB-04, TB-03 & TB-03 VDS Chassis Information is correct as of November 1,…
Hop-Up Options no.1838 T3-01 Steering Spring Set (Medium/Hard) Item No: 54838 ★This set includes 2 stiffnesses of spring - medium (yellow marking) and hard (blue marking). ★They can be installed in place of the kit-standard MC10 for alternative setups. ★Also includes 15x150mm sponge tape. Compatible ChassisT3-01 Chassis Information is correct as of November 1, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1839 T3-01 Front Spring Set (Soft/Hard) Item No: 54839 ★This set includes 2 stiffnesses of spring - soft (red markings) and hard (blue markings). ★They can be installed in place of the kit-standard MC9 parts for alternative setups. ★Included 3mm X-rings and oil can be used to further adjust damper performance. Compatible ChassisT3-01 Chassis Information is correct as of November 1, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1840 T3-01 Rear Spring Set (Soft/Hard) Item No: 54840 ★This set includes 2 stiffnesses of spring - soft (red marking) and hard (blue marking). ★They can be installed in place of the kit-standard MA10 for alternative setups. Compatible ChassisT3-01 Chassis Information is current as of November 1, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1841 T3-01 Front Tire (Soft) Item No: 54841 ★This tire is a softer compound than its kit-included counterpart. ★Gives excellent grip, and is well-suited to driving on slippery surfaces. ★An inner sponge is included. Compatible ChassisT3-01 Chassis Information is correct as of November 1, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1842 T3-01 Aluminum Front Axle Shaft Item No: 54842 ★Used in place of kit-standard MC8 part, this shaft is made from lightweight aluminum. It lightens the model and enhances steering. ★Screws, etc. for attachment are included. Compatible ChassisT3-01 Chassis Information is current as of November 1, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1843 T3-01 Aluminum Swing Shaft Item No: 54843 ★Used in place of kit-standard MB11 part, this shaft is made from lightweight aluminum. It lightens the model and gives smooth lean. ★Small parts for attachment are included. Compatible ChassisT3-01 Chassis Information is current as of November 1, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1845 3x50mm Aluminum Turnbuckle Shaft Item No: 54845 ★Stylish blue anodized aluminum turnbuckle shaft offers a weight reduction over standard parts, and can be easily adjusted for length. ★Can be used to replace parts such as the TB-05 PRO chassis kit standard steering rod. Compatible ChassisTB-05 PRO Chassis Information is correct as of November 1, 2018. Specifications are subject to change without notice.
Mini 4WD PRO Series No.50 DCR-02 (MA Chassis) Item No: 18650 ★This exciting model is the latest release in the DCR system series. ★Its stylish yellow body is the creation of Japanese designer Takayuki Yamazaki, and features a 3-part breakdown. ★MA chassis parts are molded in gun metal color ABS. Information is correct as of November 1, 2018. Specifications are subject to change without notice.
Our Products
Social sharing
Visitors
 | Today | 568 |
 | Yesterday | 1360 |
 | This week | 3546 |
 | This month | 29110 |
 | All | 2482417 |
Who's Online
We have 221 guests online