TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Jun 2022
Jun 2022

Jun 2022 (9)

Absima have developed new software for their CTS 10 V3 Revenge and CTS 8 V3 Revenge range of speed controllers. The new V3.1 software now includes two brake profiles, a linear and a dynamic brake control. Whereas the linear brake control features the initial feel and brake strength of the V3 software, the new dynamic brake control features a much stronger brake rate up to 150% and provides a dynamic brake power which can be fully adjusted. The new V3.1 software is available on the Absima homepage.
This is the new iRacing GTX5 .21 GT engine, based on the well known O.S. R2104 engine. The motor sports a new crankshaft with redesigned counter weight giving the engine better balance and has been given a special DLC treatment for longer life. It boasts 5-port line for improved torque in the low to middle power range giving lots of power, even in high traction tracks. The new cooling head comes in a silver finish and has been machined to reduce weight while the cooling head button now sports a silicone O-ring to prevent dust from entering the engine.
Pro-Line is proud to introduce the iconic 1967 Mustang clear body to the no prep drag racing scene. The front end features a massively inset grill and headlights just like the full-size muscle car, which is only made possible with Pro-Line’s proprietary moulding technology. This Mustang body has been faithfully recreated in 1/10 scale size and tuned specifically for drag racing. The body comes clear giving you the option to paint the body however you desire and Pro-Line even includes a drag-style rear wing to keep you going straight down the track. If you are a Mustang fan, then this…
Introducing the all-new Axis ST series of race bodies for the for TLR 22T 4.0 & AE T6.2 Stadium Trucks from Pro-Line. Designed with the latest in CAD technology, the Axis ST features a low-slung design with sharp lines throughout giving it an unmistakable look on the track. The Axis is a cab-forward design that provides an enhanced steering response to get you around the track faster than ever. The rear of the Axis body has the right amount of clearance for running the rear shocks either in the front or the back of the shock tower. Pro-Line includes two…
Bittydesign have released this Seven65 body shell for the 1/7th scale Arrma Infraction/Limitless cars. Like their 1/8th GT version this too takes inspiration from British GT3 super cars but unlike that body, this new version benefits greatly from the Arrma’s more realistic wheelbase to make what is a great scale looking body shell. Made with high quality and genuine 1.5mm thick polycarbonate Lexan, it is sold clear with protective film outside and comes with a pre-cut decal sheet and windows masks and the kit includes a complete set of screws, nuts and large plastic washers to properly fix the rear…
Mon-tech Racing have presented their new F22 bodyshell for the Formula 1 class. After intensive testing during the past several months on tracks across Italy and around Europe, Mon-tech Racing has signed off the new F22. This body shell offers excellent traction and high cornering speed without lacking steering. Thanks to their new Mon-tech Racing moulding system, they can ensure maximum product quality and lightness and, like all Mon-tech Racing products, it is printed with top quality polycarbonate.
New from Schumacher, the Cougar LD2 is the ultimate buggy for 2WD off road racing. It is fast, light, and now features an even lower centre of gravity for improved cornering speed. It is a very versatile platform, with outstanding performance on a wide range of grip levels, from carpet to astro to dirt. The LD2 has been designed to be easy to drive and user friendly for the most enjoyable racing experience. It is backed by Schumacher’s world class international racing team who will put the LD2 at the top of the podium all over the world. Available in…
JConcepts begins to stretch its legs in the Drag Racing scene with the introduction of the new Pontiac Firebird. The new 1968 styled body dubbed, ‘The Machine’ has been an immediate hit on and off the race track and prototyped and driven by JConcepts drivers across the United States. The Firebird has a long silhouette allowing an even displacement of downforce over the front and rear end helping the body gain grip where needed. When a driver makes initial throttle response, the over-hang in the rear and built-in rear side-dams help the vehicle gain forward traction and launch stability. Getting…
ARC have released the R8.3E, their new 1/8th onroad electric competition car kit. Coming standard with a 5mm carbon fibre chassis which not only reduces weight but has excellent flex characteristics that delivers superior mechanical grip. The R8.3E transmission retains a 3-belt drive system through the centre of the chassis. The belts and pulleys are the same specifications as the R8.3. The integrated 3-piece upper deck connects the front bulkhead to the rear along with a fan mount for cooling the motor. The upper deck design complements the main chassis to provide optimised flex, but at the same time, reduces…

News

Social sharing

Who's Online

We have 487 guests online