TQ R/C & Hobbies

XRAY NT18T Professional 1/18 4WD shaft-driven micro nitro truck
• the world's first 1/18 nitro off-road truck
• 4WD shaft-drive micro nitro car
• powerful 0.8cc nitro engine 
• super fast - speed more than 50km/hour (30mph)
• easy to drive and handle
• excellent fun and RC enjoyment
• works with any standard RC fuel

• drivetrain includes 24 high-speed bearings for maximum efficiency and speed 
• maximum drive train efficiency
• fully independent front and rear suspension
• front and rear adjustable ball differentials
• adjustable shock position for damping adjustment
• oil-filled coil-over shocks
• servo saver included
• front and rear anti-roll bars
• adjustable turnbuckles
• 30cc capacity fuel tank with hypertonic tank lid, and internal stone type filter
• CNC-machined Swiss T6 7075 aluminum chassis
• integrated 1-piece moulded radio tray
• top deck for maximum stability
• 36pc nickel-coated steel pivot balls throughout the suspension
• steel spur gear for dusty tracks
• accepts standard electronics

This kit includes the #389103 XRAY Micro Nitro Electronic Pack (Receiver Battery, 2x Servo, Switch+Cables) which includes electronics specially designed for the XRAY NT18 and NT18T. The Electronic Pack includes one Receiver Battery Pack, two XMS01-MG high-quality micro servo with metal gears, and a pre-wired on/off switch with cables.

"I am extremely proud that XRAY has proved once again to be the innovation and design leader in RC world, creating new revolutionary ideas, and setting new trends and standards by introducing the world's first micro nitro on-road car - the XRAY NT18."

The heritage of XRAY excellence continues as we proudly present... the world's first micro nitro off-road truck - the XRAY NT18T.

Dipl. Eng. Juraj Hudy, chief designer, XRAY

Main features:

• the world's first 1/18 nitro off-road truck
• 4WD shaft-drive micro nitro car
• powerful 0.8cc nitro engine 
• super fast - speed more than 50km/hour (30mph)
• easy to drive and handle
• excellent fun and RC enjoyment
• works with any standard RC fuel
• accepts standard electronics

• drivetrain includes 24 high-speed bearings for maximum efficiency and speed 
• maximum drive train efficiency
• fully independent front and rear suspension
• front and rear adjustable ball differentials
• adjustable shock position for damping adjustment
• oil-filled coil-over shocks
• servo saver included
• front and rear anti-roll bars
• adjustable turnbuckles
• 30cc capacity fuel tank with hypertonic tank lid, and internal stone type filter
• CNC-machined Swiss T6 7075 aluminum chassis
• integrated 1-piece moulded radio tray
• top deck for maximum stability
• 36pc nickel-coated steel pivot balls throughout the suspension
• steel spur gear for dusty tracks
• accepts standard electronics

Technical specifications:

• length (without body): 208mm
• wheelbase: 150mm
• front width (outside rims): 178mm
• rear width (outside rims): 180mm
• front caster: 12.3°
• approx. running weight: 690 g
• internal gear ratio: 2.5

Included:

• XRAY NT18 engine 0.8cc & muffler
• racing style dish wheels
• rubber low pin tires with foam inserts 
• 1/18 racing truck body included 
• HUDY phillips screwdriver for comfortable assembly

XRAY NT18 engine 0.8cc

• uses standard model car fuel
• standard glow-plug design
• durable construction
• large, billet blue anodized aluminum heatsink
• slide adjustable carburator
• dual needle aluminum carburator
• 2 shoe aluminum clutch
• T6 aluminum flywheel
• polished muffler
• HUDY steel 16T clutch bell
• silicone fuel tubing

XRAY quality… ready to run…

Introducing XRAY's NT18MT RTR kit… XRAY quality, built in the box!

XRAY’s nitro micro monster truck - the NT18MT - now comes fully assembled with an XRAY premium radio system and electronics set, creating a world-class RTR set. Assembled in the European XRAY factory, the ready-to-run micro nitro monster truck is ready to hit the track or your backyard!

The RTR package includes everything you need to get your NT18MT running in a matter of minutes. The easy-to-use instructions describe how to easily and safely perform the required engine break-in process to get the most out of your NT18MT. The fully assembled and electronics-equipped truck comes with a highly-detailed painted, trimmed and decaled truck body. Radio system is available on world-friendly frequencies.

XRAY NT18MT Professional 1/18 4WD shaft-drive nitro micro truck
• the world’s first 1/18 4WD shaft-drive nitro off-road monster truck 
• powerful 0.8cc nitro engine with tuned exhaust system
• super fast — more than 50km/hour (30mph)
• easy to drive and handle
• excellent fun and RC enjoyment
• works with any standard RC fuel

• 30cc capacity fuel tank with hypertonic tank lid, and internal stone type filter
• CNC-machined Swiss T6 7075 aluminum chassis
• integrated 1-piece moulded radio tray
• top deck for maximum stability
• powerful disk-brake system
• super-efficient, ball-bearing supported drivetrain
• steel clutchbell with integrated pinion gear

• steel spur gear for dusty tracks
• front and rear adjustable ball differentials 
• fully independent and adjustable front and rear suspension
• maximum suspension uptravel
• 8x oil-filled coil-over shocks
• servo saver included
• micro monster truck tires included

XRAY Electronics installed in the NT18MT RTR:

• high-capacity receiver battery pack
• two XMS01 metal-gear servos
• pre-wired on/off switch with cables
• XT1 AM high quality radio system

Charger and charging cable not included in the kit.

"I have been a diehard nitro fan since my teenage years. When we designed XRAY M18, the micro 1/18 car, in the back of my mind I had an idea of creating something new, something revolutionary, something avant-garde --- a nitro powered 1/18 touring micro car. I have now made my dream come true." 


Dipl. Eng. Juraj Hudy, chief designer, XRAY

Main features:

• the world's first 1/18 nitro touring car
• 4WD shaft-drive micro nitro car
• powerful 0.8cc nitro engine 
• super fast - speed more than 50km/hour (30mph)
• easy to drive and handle
• excellent fun and RC enjoyment
• works with any standard RC fuel

• drivetrain includes 18 high-speed bearings for maximum efficiency and speed 
• ultra low center of gravity
• maximum drive train efficiency
• fully independent front and rear suspension
• front and rear gear differentials
• adjustable shock position for damping adjustment
• coil-over shocks for precise chassis handling
• adjustable body posts
• 30cc capacity fuel tank with hypertonic tank lid, and internal stone type filter
• CNC-machined Swiss T6 7075 aluminum 1.5mm chassis
• integrated 1-piece moulded radio tray
• accepts standard electronics

Technical specifications:

• front width: adjustable 98-101mm
• rear width: adjustable 104-107mm
• length: 215 mm
• wheelbase: 150mm
• front/rear camber: -1° (present)
• front caster: 12° (preset)
• front toe: 0.5° toe-out preset (adjustable option)
• rear toe: 4° toe-in preset (adjustable option)
• down stops: front/rear down stops preset (adjustable option)
• ride height: 3~4mmm
• weight: 422 g
• approx. running weight: 530 g

Included:

• XRAY NT18 engine 0.8cc & muffler
• set of foam tires 
• 1/18 micro body 150mm
• front foam bumper
• HUDY phillips screwdriver for comfortable assembly

XRAY NT18 engine 0.8cc

• uses standard model car fuel
• standard glow-plug design
• durable construction
• large, billet blue anodized aluminum heatsink
• slide adjustable carburator
• dual needle aluminum carburator
• 2 shoe aluminum clutch
• T6 aluminum flywheel
• polished muffler
• HUDY steel 23T clutch bell
• silicone fuel tubing

XRAY NT18 Professional 1/18 4WD shaft-driven micro nitro touring car
• the world's first 1/18 nitro touring car
• 4WD shaft-drive micro nitro car
• powerful 0.8cc nitro engine 
• super fast - speed more than 50km/hour (30mph)
• easy to drive and handle
• excellent fun and RC enjoyment
• works with any standard RC fuel

• drivetrain includes 16 high-speed bearings for maximum efficiency and speed 
• ultra low center of gravity
• maximum drive train efficiency
• fully independent front and rear suspension
• front and rear gear differentials
• adjustable shock position for damping adjustment
• coil-over shocks for precise chassis handling
• adjustable body posts
• 30cc capacity fuel tank with hypertonic tank lid, and internal stone type filter
• CNC-machined Swiss T6 7075 aluminum 1.5mm chassis
• integrated 1-piece moulded radio tray
• accepts standard electronics

This kit includes the #389103 XRAY Micro Nitro Electronic Pack (Receiver Battery, 2x Servo, Switch+Cables) which includes electronics specially designed for the XRAY NT18 and NT18T. The Electronic Pack includes one Receiver Battery Pack, two XMS01-MG high-quality micro servo with metal gears, and a pre-wired on/off switch with cables.

XRAY is pleased to present the new XRAY NT1R, the latest release from the XRAY design studio for the nitro car racer in everyone. The XRAY NT1R represents the latest offering of the super-successful RAYCER concept – luxury at an affordable price. 

The new XRAY NT1R is based on the world’s most successful and award-winning XRAY NT1 high-performance nitro touring car, a car that has raised the bar in engineering, design and performance and has won the hearts of racers worldwide along with an exceptional amount of titles and awards including multiple European and USA Championship titles.

With a very affordable street price, the NT1R is sure to appeal to every RACER!

With the worldwide success of the NT1 both on the tracks and customer’s satisfaction supported by gained multiple awards, I wanted to release a version that would allow everyone to enjoy the design and performance benefits of the NT1 no matter what their racing needs and budget are. Thus the NT1R was born.

See it. Feel it. Drive it.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

XRAY is very proud to share with you the most exciting moments of the World Champion title.

The XRAY world-wide team has over the decade captured – in different categories around the world – more than 42 titles of US Champion, 13 titles of European Champion and 300+ National Champion titles. This year, Team XRAY adds to this extensive victory list the most coveted and most valuable title : WORLD CHAMPION!

Celebrate with us these wonderful and glorious moments, celebrate with us our first World's gold medal with the collectors' limited edition Ralph Burch NT1 World Champion Edition loaded with all the newest and finest option parts as used by the XRAY Factory Team and Ralph Burch to win the World's title.

The NT1 has been the most successful nitro touring car in the last few years, winning not only all major race events and awards but also winning the hearts of racers across the globe. The domination of the NT1 platform around the world has secured dozens of national titles including European champion title and USA Champion title, as well as the Junior European title and European “B” title. With many awards including Car of the Year awards and Readers Choice award — bringing the NT1 to the next level was a challenging task for NT1 Chief Designer Martin Hudy and the XRAY design team. 

XRAY’s primary focus was on improving fine details while increasing reliability and performance. Value being a foremost consideration, XRAY is very pleased to include as standard many new and improved parts that were previously only available as options. The NT1 is a premier nitro touring car straight out of the box, able to put you into the winners circle at club, national, or world championship levels… with all the finest features that put the XRAY factory team on the podium. Bring home victory with the 2010 NT1, the best of the best.

New 2010 NT1 Spec:

• new front suspension allows wheelbase adjustment
• new narrower front lower arms
• new rear shock tower with refined shock positions for more fine set-up adjustment
• new more symmetrical radio plate
• new rear roll center bridge with refined link positions for more fine set-up adjustment
• new wider drivetrain belts for increased reliability and durability 


Latest improved features included with 2010 NT1 Spec:

• included XRAY aluminum racing shock bodies (previously optional)
• included HUDY Spring Steel™ front & rear CVD drive shafts (previously optional)
• wider 2-speed 2nd gear for increased durability & lifespan
• reinforced & improved suspension parts
• fuel tank pressure cap with 1-pc profiled seal for perfect sealing
• steering servo mount for mid-size servos
• top deck mounts for mid-size servos
• belt tensioner holder for improved belt tension adjustment
• harder 2-speed springs


XRAY NT1 — Empowered with Luxury and Performance

Smooth flowing lines, distinctive design touches, all sculpted in lightweight platform - an amalgam of power, dramatic styling, superior technology, pure luxury and performance. With XRAY's uncompromising design philosophy bringing everything together to make the best nitro touring car, the NT1 has the unique XRAY character, borne of precision craftsmanship, highest attention to detail, and using only the finest quality materials. For drivers with an irrepressible drive to win, the NT1 is the answer.

The ultimate expression of racing passion. The art of performance. NT1.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

XRAY quality… ready to run…

Introducing XRAY's M18T RTR kit… XRAY quality, built in the box!

Combining the worlds most successful micro truck, the XRAY M18T with the all new XRAY premium radio system and power pack truly create a world class RTR. Assembled in the eu ropean XRAY factory, its just like you built it yourself...... or better.

The RTR package includes everything you need (except battery pack and charging cable) to get your M18T on track in a matter or minutes. The fully assembled and electronics equipped truck comes with pre-painted, trimmed and decaled body. Body available in red, blue, green or orange color. Radio system is available on world friendly frequencies.

Main features:

XRAY M18T Professional 1/18 4WD shaft-drive micro truck
• maximum efficiency drivetrain includes 22 high-speed ball-bearings
• fully independent front and rear suspension
• oil-filled coil-over shocks
• servo saver included
• adjustable turnbuckles
• front and rear adjustable ball differentials
• adjustable shock position for damping adjustment
• easily-adjustable motor mount
• chassis accommodates 5 or 6 cell battery packs
• set of pre-glued tires
• pre-painted, trimmed and decaled body (red, blue, green or orange color)
• set of pinions

Technical specifications for XRAY M18T RTR:

• length (without body): 211mm
• wheelbase: 150mm
• front width (outside rims): 178mm
• rear width (outside rims): 180mm
• front caster: 12.3°
• weight: 295g
• ready to run weight: 535g
• internal gear ratio: 2.5

XRAY Electronics installed in the truck/monster truck:

• 370 super-size motor with installed capacitor board
• XMC300R speed controller with reverse
• XMS01 servo with installed servo saver
• XT1 AM high quality radio system

Not included in the kit
• battery pack
• charging cable 
• charger

XRAY is pleased to present the improved and refined M18T PRO, a re-designed version of the ultra-popular M18T made with higher-performance racing in mind. The progressive design embodies an enhanced driving experience from the race-oriented high-performance graphite chassis and top deck...through the lengthened wheelbase... to the world -renowned top-secret HUDY Spring Steel™ driveshafts...and much much more. The M18T PRO was borne of racing DNA to challenge your racing skills on any track.

High performance. Micro size. Undeniably XRAY.

Dipl. Eng. Juraj Hudy, Chief Designer, XRAY