TQ R/C & Hobbies

Tamiya Indonesia Championship 2018

  • Seri 1 : 11 Maret 2018 - Sunter International Speedway
  • Seri 2 : 22 April 2018 - East RC
  • Seri 3 : 22 Juni 2018 - To be advised
  • Seri 4 : 22 Juli 2018 - Sunter International Speedway
  • Regulations attached PDF

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  Next 
  •  End 
  • »
Page 1 of 3
Xray

Wednesday, 09 February 2011 22:09

XRAY XT8 - 2009 Specs

Written by tony

Under the direction of the XRAY legendary world racing team RC car designer Dipl. Ing. Juraj Hudy and the XRAY design team headed to the design studio armed with a truck-full of great new ideas for improving on a already great package ,.The new 2009-spec XT8 has been updated for competition racing by focusing attention on the finest details.

Whether talking about handling improvement, jumping ability, drivetrain efficiency or acceleration ability, everything has been improved on the XT8. The 2009 XT8 features new front suspension, all new big-bore shocks for improved handling, new weight balance for much improved handling over bumps, super lightweight drivetrain parts, and all new graphite parts replacing aluminum equivalents to bring weight down to a minimum. And that is only a partial list of what we’ve done. The 2009-spec XT8 Truggy is again another perfect example of XRAY’s attention to detail and craftsmanship. Get set to take the Truggy class by storm with the new 2009-spec XT8.

Wednesday, 09 February 2011 22:05

XRAY XII Link

Written by tony

In the world of small, agile, and super-fast 1/12 pan cars, winners are separated from the rest of the pack sometimes by mere fractions of a second. With inherently simpler designs compared to larger touring cars, attention to detail is paramount.

XRAY has taken its XII pan car to the next level with the introduction of the now-industry-standard linkage rear end. The XII Link is now truly a universal platform that follows current rules and trends in allowing the use of either NiMH or LiPo battery technology with no ill-effects to handling or balance.

The XII Link was designed and tested on club tracks around the world to perform on any surface under any conditions. Whether soaking up bumps on a rough asphalt club track or slicing through the infield of a super-smooth carpet track, the XII Link does it with ease and versatility.

The XRAY XII Link achieves a state of perfection by focusing on well thought-out refinements to create a car that is easy to drive, work on, and adjust. Top-quality materials such as self-developed composite mixtures, HUDY Spring Steel™, premium Swiss 7075 T6 aluminum, and highest-grade graphite are XRAY signatures and the XII has them in abundance. Designed in virtual reality using the world’s most sophisticated CAD tools, and manufactured using the world’s best machining and molding machinery, the XII Link achieves a level of premium perfection in all details that is second to none. All parts are designed and manufactured by XRAY.


Wednesday, 09 February 2011 22:00

XRAY XII

Written by tony

In the world of the small, agile, and super-fast 1/12 pancars, winners are separated from the rest of the pack sometimes by only fractions of a second. With simpler designs compared to larger touring cars, attention to detail is paramount. 

The new XRAY XII may at first glance seem like a simple and traditional design, but that’s where the similarities end. The XRAY XII achieves a state of perfection by focusing on well thought-out refinements to create a car that is easy to drive, work on, and adjust. 

Top-quality materials such as self-developed composite mixtures, HUDY Spring Steel™, premium Swiss 7075 T6 aluminum and highest-grade graphite are the signature of XRAY and the XII has them in abundance. Designed in virtual reality using the world’s most sophisticated CAD tools, and manufactured using the world’s best machining and molding machinery, the XII achieves a level of premium perfection in all details that is second to none. All parts are purpose-designed and manufactured by XRAY, so all parts fit and work perfectly together.

In a world where overly-complicated designs hinder rather than enhance, the XII stands alone and ahead as the best performing out-of-the-box racer.

See it. Feel it. Drive it.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

Wednesday, 09 February 2011 21:57

XRAY XB808E

Written by tony

XRAY presents the all-new 808E – the electric-powered version of the ultra-successful XB808, the 1/8 nitro off-road car which has countless wins and victories, awards and national titles from around the world. Designed for professional racers, the 808E features ultra-high performance parts, finest quality materials, unmatched precision in manufacturing, and backed up with legendary XRAY support and service. The 808E is a professional race car delivered in kit form to let you select & install your own electronics. Supported by XRAY dedication, passion, and heritage of performance, the 808E is ready to take you to the Winners Circle.

New. Electric. Durable. Fast. Performance. XRAY 808E. The ultimate electric buggy engineering masterpiece from XRAY artisans and craftsmen. Superior… yet new. It challenges you to take it to the edge and beyond… commanding you to take command of the pack. Drive it… race it… win. Experience the fascination of electric buggy racing… performance to rival its nitro brethren Experience the all-new XRAY 808E.

Since 2004 when XRAY released the first 1/8 off-road car, the XRAY XB8 platform has enjoyed great success both on and off the track. Praised by the RC press and media, as well as customers themselves, the XB8 platform has been the recipient of several Car-of-the-Year awards. Along with numerous National titles around the world – including the most prestigious European Champion title – the XB8 has been one of the world’s most successful off-road cars.

Wednesday, 09 February 2011 21:53

XRAY XB808 - 2010 Specs

Written by tony

XRAY brings the refined and improved 808 platform into the 2010 racing season supported by XRAY’s legendary dedication, passion and heritage of performance, reliability. Based on the successful 808 platform, the new 2010-spec 808 was updated to make the buggy, more durable to withstand long main events while boosting performance in all racing conditions. With XRAY’s dedication to small details and long-term extensive testing and feedback from Team XRAY drivers around the world, the 2010-spec 808 has been improved in every way.

With the 2009 Car of the Year award, Viewers Choice award, and countless wins and victories at racetracks around the world, XRAY presents the new and improved 2010-spec 808.

Wednesday, 09 February 2011 21:48

XRAY X10

Written by tony

The exciting world of 200mm 1:10 GT racing… synonymous with “speed,” “precision,” and “champions.” The ideal class for XRAY to unveil its latest engineering masterpiece: the XRAY X10 “GT version.”

Based on the all-new XRAY XII 1:12 pan-car, XRAY Project Manager Martin Hudy created the perfect platform to dominate the new World GT class of 200mm 1:10 pan cars. 

Knowing that the X10 would need a versatile design — participating in classes with either open-tire rules or spec-tire rules — particular attention was paid to the rear end of the car to give it the perfect combination of rear traction, corner speed and steering under any conditions. Well-proven yet “conventional” T-bar technology again proved to make for faster and more consistent handling.

Top-quality materials such as self-developed composite mixtures, HUDY Spring Steel™, premium Swiss 7075 T6 aluminum and highest-grade graphite are part of XRAY’s signature, and the X10 has them in abundance. Designed in virtual reality using the world’s most sophisticated CAD tools, and manufactured using the world’s best machining and molding machinery, the X10 achieves a level of premium perfection in all details that is second to none. All parts are purpose-designed and manufactured by XRAY, so all parts fit and work perfectly together, with many parts fully compatible between the X10 and XII platforms.

The XRAY pedigree is carried over into the X10, allowing for a car that is very easy to build and dial in for any level of RC racer. Setup and tuning could not be easier, and exquisite quality and customer service are our promise to you. Get the holeshot, lead the pack, take the win with the new XRAY X10.

See it. Feel it. Drive it.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

Wednesday, 09 February 2011 21:45

XRAY X10 Link

Written by tony

XRAY has taken its X10 pan car to the next level with the introduction of the now industry-standard linkage rear end. The X10 Link is now truly a universal platform that conforms and adapts to current rules and trends in allowing the use of either NiMH or LiPo battery technology with no ill-effects to handling or balance.

The X10 Link has been designed to be driven and win on any club track around the world, under any conditions. Whether soaking up bumps on a rough asphalt club track or slicing through the infield of a super-smooth carpet track, the X10 Link does it with ease and versatility.

Top-quality materials such as self-developed composite mixtures, HUDY Spring Steel™, premium Swiss 7075 T6 aluminum, and premium-grade graphite are part of XRAY’s signature, and the X10 has them in abundance. Designed in virtual reality using the world’s most sophisticated CAD programs and tools, and manufactured using the world’s best machining and molding machinery, the X10 Link achieves a level of premium perfection in all details that is second to none. All parts are purpose-designed and manufactured by XRAY, so all parts fit and work perfectly together, with many parts fully compatible between the X10 and XII platforms.

The XRAY pedigree is carried over into the X10 Link, making this a car that is very easy to build and dial in for any level of RC racer. Set-up and tuning are done very easily, and exquisite quality and customer service are our promise to you. Get the holeshot, lead the pack, take the win with the new XRAY X10 Link.

See it. Feel it. Drive it.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

Wednesday, 09 February 2011 21:39

XRAY T3R

Written by tony

XRAY is pleased to offer the all-new XRAY T3R, the latest release from the XRAY design studio that will surely please the masses. The XRAY T3R represents the latest evolution of the super-successful RAYCER concept – luxury at an affordable price. 

The new XRAY T3R is based on the award-winning XRAY T3 high-performance electric touring car plat form, a car that has raised the bar in engineering, design, and performance and has won the hearts of racers worldwide along with an exceptional amount of titles and awards.

With the worldwide success of the T3 platform — my best touring car design to date — I wanted to release a platform that would allow everyone to enjoy the design and performance benefits of the T3 platform no matter what their racing needs and budget are.

See it. Feel it. Drive it.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

Martin Hudy
T3 Designer, XRAY

Wednesday, 09 February 2011 21:33

XRAY T3 2011 Specs

Written by tony

The Saga Continues

XRAY has long been viewed as the highest-quality and best-performing touring car available since it arrived on the RC car scene in 2000. Now with a long and distinguished history of racing achievements and groundbreaking, award-winning innovations, XRAY is proud to offer the 2011 version of the T3 platform… a top-quality “no-compromise” engineering marvel designed to put you in the Winners Circle.

Revolution, evolution, optimization… those are the key terms that describe the T1 and T2 platforms brought forward to the racing world in the last decade, and the new T3 carries with it all the heritage and racing pedigree to again raise the standard even higher. XRAY Research & Development along with the Factory Team have devoted themselves to extensive testing, all in the effort to bring to the consumer the latest evolution year after year. The T3 platform has been redesigned and improved for 2011, raising the bar once again. No extras needed… just a desire to win.

pure DESIGN. pure ADRENALINE. pure RACING.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

Wednesday, 09 February 2011 21:28

XRAY NT18T RTR

Written by tony

XRAY quality… ready to run…

Introducing XRAY's NT18T RTR kit… XRAY quality, built in the box!

XRAY’s nitro micro truck - the NT18T - now comes fully assembled with an XRAY premium radio system and electronics set, creating a world-class RTR set. Assembled in the European XRAY factory, the ready-to-run micro nitro truck is ready to hit the track or your backyard!

The RTR package includes everything you need to get your NT18T running in a matter of minutes. The easy-to-use instructions describe how to easily and safely perform the required engine break-in process to get the most out of your NT18T. The fully assembled and electronics-equipped truck comes with a highly-detailed painted, trimmed and decaled truck body. Radio system is available on world-friendly frequencies.

XRAY NT18T Professional 1/18 4WD shaft-drive nitro micro truck
• the world’s first 1/18 4WD shaft-drive nitro off-road truck 
• powerful 0.8cc nitro engine with tuned exhaust system
• super fast — more than 50km/hour (30mph)
• easy to drive and handle
• excellent fun and RC enjoyment
• works with any standard RC fuel

• steel spur gear for dusty tracks
• front and rear adjustable ball differentials 
• fully independent and adjustable front and rear suspension
• oil-filled coil-over shocks
• front & rear anti-roll bars
• servo saver included
• micro truck tires included

• 30cc capacity fuel tank with hypertonic tank lid, and internal stone type filter
• CNC-machined Swiss T6 7075 aluminum chassis
• integrated 1-piece moulded radio tray
• top deck for maximum stability
• powerful disk-brake system
• super-efficient, ball-bearing supported drivetrain
• steel clutchbell with integrated pinion gear

XRAY Electronics installed in the NT18T RTR:

• high-capacity receiver battery pack
• two XMS01 metal-gear servos
• pre-wired on/off switch with cables
• XT1 AM high quality radio system

Charger and charging cable not included in the kit.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  Next 
  •  End 
  • »
Page 1 of 3

Social sharing

Visitors

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday257
mod_vvisit_counterYesterday622
mod_vvisit_counterThis week3857
mod_vvisit_counterThis month15119
mod_vvisit_counterAll2233916

Who's Online

We have 69 guests online