TQ R/C & Hobbies

Ielasi Tuned concludes it 2024 engine releases with the new GP9R24 .21 Onroad engine.  Compared to their previous flagship GP9R23WC engine the the new GP9R24 engine get an exclusive Ielasi Tuned piston which allows the Italian engine tuners to have a tighter piston/cylinder coupling than the WC allows it to maintain better compression even when hot.  The GP9R24 will be released with the new “R” reinforced connecting rod, crank with different timing and balancing to attenuate internal vibrations, new engine backplate and inner head with revised configuration and cooling head with the new 2024 graphics. View piston comparisons here

New from Sworkz and following the latest wing trends is their Sonic Lexan Wing for 1:8 Offroad racing.  With a lexan wing holder, it makes the whole wing set super light weight.  It is especially good in high grip and carpet track condition. The lexan wing helps stabilise the rear suspension and makes your buggy move quicker and yet in a more stable way. The Sonic Wing is “Pre-Cut” and ready to be used out of the pack saving a lot of time and preparation.  Coming as a set of two wings it is offered in a standard or durable…

Blitz has updated its  EK9 1:10th Bodyshell for FWD class with the release of the EK9-MK2.  The original EK9 was developed in 2019 because the EFRA GBS body rules for FWD class applied but now they have fine-tuned it and made the EK9-MK2.  The development of EK9- Mk2 bodyshell is based on the middle motor Front wheel driver chassis, the roof height of the Mk2 is low down 10mm, with the low profile design improving the airflow and increasing downforce, compared with EK9 the new Mk2 body can carry more corner speed, less traction roll, and much more stability.  The…

Yokomo has two new options for its flagship MS1.0 1:10 Electric Touring Car in the form of a new caster measurement tool and new springs.  The new caster measurement tool is attached to the steering block on the MS1.0 to facilitate caster measurement when measuring alignment when the new turnbuckle tuning part is in use.  The tool allows you to check and adjust caster accurately.  The new springs are softer than the MS1.0 standard springs.  Available in 1.8 and 1.85, they are effective for outdoor asphalt surfaces where you want more traction with a combination of 1.80 in the front…

In the latest product evolution from Ryan Maker’s RC Maker comes this blacked out Weighted Tweak Wheel Set Pro for 1:10 Touring Car.  Featuring a more stylish updated design that also increases the usability, durability and accuracy of the tweak wheels.  With longer thumb nuts for easier attachment, new chamfered nuts tighten down to hex without shims.  It has a smaller range of motion once wheel lifts, for faster resetting with a one-piece weight/bulkhead design for increased rigidity and durability.  A premium dual colour lock in base makes for easy transport.  Made from RC Maker’s signature GeoCarbon, stylish chamfered, black…

New from Vigor RC is this Aluminium Gear Differential Housing for the Yokomo MS1.0 1:10 Electric Touring Car.  Also suitable for the BD12,  the housing is made from 7075 Aluminium and features a long lasting and low friction POM pulley.  The aluminium housing provided a more smooth differential and makes for more stable gear diff oil temperature. View more images here

Team Associated’s Factory Team brand has announced new aluminium hubs for the RC10B7 1:10 2WD Buggy.  These hubs are a more durable alternative to the molded hubs and provide more unsprung weight, which can be used as a tuning option.  The HRC (High Roll Center) hubs include the secondary bearing bore for the upcoming FT Universals.  The HRC hubs allow for higher axle heights, which is great when running on high grip surfaces with smaller diameter tires and lower ride heights. Both standard and HRC variants have colour options of anodised blue or black with secondary machined chamfers and laser-etched…

Having made a big impression on the RC market over recent months, Chinese radio manufacturer FlySky has released an update to their popular Noble Pro Radio with the introduction of the Noble NB4 Pro+.  Improvements with the Pro+ include median accuracy further improved by 20%.  The potentiometer in the Pro+ has a smaller voltage fluctuation range, a smaller maximum deviation, and more stable voltage changes.  The NB4 Pro+ features a 3.5-inch 320*480 IPS HB outdoor display screen which has been improved for 4-times more brightness.   It presents bright colours and clear picture details, making the bright parts brighter and the…

Infinity has released a ‘Wide Spec’ version of its World Championship winning 1:10 Nitro Onroad IF15-2 kit.  The ‘Wide Spec’ gives you a 1:10 235mm category set-up allowing you to easily enjoy high performance.  The front end features short shocks to accommodate the low nose of 1:10 235mm LeMan style bodyshells which generates powerful downforce.  For the kit a front differential has been chosen to achieve even easier drivability.  The rear is equipped with a linked rear body mount that transmits downforce directly to the hub.   View more images here

Italian bodyshell producer Mon-Tech Racing has released a new 1:10 Touring Car bodyshell called the Julia.  Extensive track testing has shown the Julia to excel in straight-line speed, a major advantage for Stock classes.  Additionally, the Julia boasts excellent stability and cornering, meeting the demands of modern bodyshell design.  Two versions are available: “Standard”, weighing approximately 80 grams, and “La Leggera” version, coming in at a lightweight of approximately 60 grams.  The Julia is produced from high-quality polycarbonate and includes window masks, headlight decals, and all the screws and washers needed to secure the rear wing. View more images here