TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Page 4 of 323

Rate this item
(0 votes)
Item No:22094 Hop-Up Options No.2094 DT-04 CARBON DAMPER STAY SET Use these 3mm carbon fiber damper stays in place of kit standard plastic parts to get more out of your dampers for an even more impressive drive! Multiple damper holes let you fine-tune setup. The set features a one-piece front stay and a two-piece rear stay. Information is current as of September 3, 2025. Specifications are subject to change without notice.
Rate this item
(0 votes)
Item No:24374 1/24 Sports Car Series No.374 1/24 SCALE NISSAN SKYLINE SEDAN 2000 TURBO GT-ES Nissan’s Skyline has been an ambassador for high performance Japanese cars for many a year. The series, which stretches all the way back to 1957, was joined in August 1981 by the sixth generation car that included the sporty 2000 Turbo GT-E S. Possessing a sleek wedge body design and 145hp 2-liter inline-six turbo engine, its 4-wheel independent suspension had…
Rate this item
(0 votes)
Item No:14143 1/12 Motorcycle Series No.143 1/12 SCALE DUCATI SUPERLEGGERA V4 with Racing Kit ★The stunning 1/12 scale Ducati Superleggera model now comes with its racing kit, which sees mirrors, turn signals and other parts removed. ★The complex Akrapovic exhaust is designed for ease of assembly. ★A two-piece recreation of the clutch allows for a simpler paint job. ★Separate parts depict the racing filler cap, brake lever protector and swing arm cover. Information is current…
Rate this item
(0 votes)
Item No:67549 Tamiya Original Goods (Apparel) TAMIYA T-SHIRT (XXXL) The classic Tamiya T-shirt with the twin star logo emblazoned upon the front and back. ★100% cotton ★This size is recommended for wearers over 185cm tall. Information is current as of August 6, 2025. Specifications are subject to change without notice.
Rate this item
(0 votes)
Item No:67548 Tamiya Original Goods (Apparel) TAMIYA T-SHIRT (XXL) The classic Tamiya T-shirt with the twin star logo emblazoned upon the front and back. ★100% cotton ★The XXL size is recommended for wearers over 180cm tall. Information is current as of August 6, 2025. Specifications are subject to change without notice.
Rate this item
(0 votes)
Item No:35392 1/35 Military Miniature Series No.392 1/35 SCALE GERMAN ANTI-TANK GUN Pak38 First shown to the public at the 2025 IPMS/USA National Convention on August 6!First delivered to units in July 1940, the Pak 38 5cm was a successor to the 3.7cm Pak 36. It featured design upgrades such as a muzzle brake, aluminum alloy trail legs, and a gun shield composed of two sheets of 4mm plate; using Panzergranate 39 shells it defeated…
Rate this item
(0 votes)
Item No:74167 Tweezers & Pliers No.167 REPLACEMENT JAW GRIPS for NON-SCRATCH LONG NOSE PLIERS II (2 SETS) These jaw grips are for use with Tamiya Non-Scratch Long Nose Pliers II. ★Fit them into the jaws on the pliers and get working! ★4 jaw grips – enough to kit out two sets of pliers - are included. Installing replacement inserts in Item 74166 (sold separately)1. Remove plastic inserts using a sturdy tool such as a screwdriver…
Rate this item
(0 votes)
Item No:74166 Tweezers & Pliers No.166 NON-SCRATCH LONG NOSE PLIERS II Special non-scratch inserts in the jaws reduce the likelihood of scratches, making them a great choice when working on delicate components like damper shafts and ball connectors from R/C models. ★They can also be used when working with aluminum wire. ★Carbon steel jaws ★Easy-grip handles Installing replacement inserts from Item 74167 (sold separately)1. Remove plastic inserts using a sturdy tool such as a screwdriver…
Rate this item
(0 votes)
Item No:95696 Mini 4WD Special Edition Products (Parts) BUMPERLESS N-03/T-03 UNITS (RED) This is a special red version of the bumperless N-03 and T-03 units for the MS chassis. ★Use them when the car is not racing, or even to lighten a racecar. ★Combine them with separately sold FRP plates to unlock the potential for loads of different setups. ★These parts weigh around half of their standard N-02 and T-01 counterparts. ★520 plastic bearings are…
Rate this item
(0 votes)
Item No:25218 Limited Edition Static Model Products 1/350 SCALE JAPANESE NAVY DESTROYER YUKIKAZE "YUKIKAZE MOVIE VERSION" This summer marks 80 years since the end of WWII hostilities in Japan, and sees the release of the Japanese movie YUKIKAZE with a story based around the eponymous destroyer which was the only ship of her class to survive the conflict. This moving tale spanning the era from the war until the present has a strong human element;…
Page 4 of 323

Social sharing

Who's Online

We have 134 guests online