TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Jan 2026
Jan 2026

Jan 2026 (11)

VP-Pro has released a new body for the Infinity IFB8 1:8 Nitro Buggy.  Featuring an integrated shark fin on the cab, this helps adds stability and increases high speed handling.  The low-slung design also features a laid-back windshield and long centre fin for ideal stability and side bite. Manufactured from lightweight 0.8mm thickness high-quality polycarbonate, the body is comes clear with window masks for painting and official VP-Pro logo stickers. BView more images here
Following the release of its competition 1:8 eBuggy last week, Corally has announced the release of the SBX-42 1:10 4WD Buggy.  Describing the kit an advanced 4WD racing buggy designed for serious RC enthusiasts and professional racers alike, it was engineered in Belgium, using high-grade materials and cutting-edge technology.  Building on its predecessor, the SBX410,  the SBX-425 sets a new standard for the company’s 1:10 offering in terms of precision, performance, and reliability.  Featuring an ultra-low centre of gravity chassis, which is constructed from anodised aluminium with carbon flex plates, this delivers exceptional stiffness, agility, and balance.  The SBX-425 comes fully…
New from JConcepts comes these two JCI RC10T bodies, the 1991 Winter Champs Wide and 1993 Winter Champs Narrow examples.  The Florida based company has re-created the classic stadium truck body (grey painted scheme) used during the release of the RC10T at the 1991 Winter Championships in Lutz, Florida.  The original styled design is wide and carries a unique look, fit, and includes a spoiler look that is secured to the tailgate area giving it a tremendous racing look.  During the early months of 1993, the Associated team fought back at the Winter Championships with updated and revised parts, along…
A bodyshell that proved popular at the recent Asian Buggy Championships season opener in New Zealand, Leadfinger Racing has released its V2 Beretta for the Xray XB8 nitro and electric buggies.  The V2 Beretta body is a design concept that combines Leadfinger’s previous Assassin, A2.1 Tactic and Berretta body features.  The modern combination complements both hard and soft lines that provide perfect overall balance under multi surface track testing.  Produced by Leadfinger Racing in the USA,  the body is sold clear wiith window masks for painting and official LFR logo stickers. View more images here
New from German body shell brand ZooRacing comes the Hyrax 190mm 1:10 hypercar body.  With touring car bodies at a stretch just about resembling the real thing these days recent hyper car releases are very much modelled on the full size car we see racing at iconic race circuits around the world, the Hyrax definitely an eye catching example.  With sleek, aggressive styling inspired by these full-scale hypercars, this class delivers the perfect mix of realism and high-performance racing.   They feature low-slung, wide-body chassis, optimised for maximum downforce and stability at top speeds.  The Hyrax is an all-new hypercar body…
Surpass Hobby has released their latest 1:8 competition brushless motor, the Rocket-RC Taurus V2.  Complying with IFMAR, EFRA, ROAR and BRCA specificiations, the Taurus V2 features an optimised design for improved efficiency and reduce running temperature.  Except for two screws for adjusting the timing angle, it uses a screwless structural design of 4-pole 12-slot high-torque motor.  The motor timing angle can be accurately adjusted in both directions without deviation to meet the power needs.  The Hall sensor is installed on the bottom cover of the motor, effectively avoiding magnetic interference; the temperature of the bottom cover is low and the…
British 1:10 Offroad parts specialists Willspeed has released this carry handle option for the recently released Exzes ZIII stick radio from Sanwa.   With iconic Japanese radio manufacturer making a trendy statement with the new Exzes ZIII by removing the antenna but more importantly the handle,  Willspeed have put together a combination of machined aluminium and carbon fibre components to create this Ultimate Carry Handle for the Exzes ZIII so you can carry the transmitter in comfort and security. View more images here
Belgium company Team Corally, once known for their competition level onroad kits, has just released a new competition spec 1:8 eBuggy called the SBX-825.  Designed in Belgium, they say the SBX-825 represents the pinnacle of European engineering and innovation.  Tested rigorously by French racer Thomas Musso, the SBX-825 claims to offer the first time ever the option to choose between two chassis options: the revolutionary molded carbon chassis, the first of its kind on the market, or the durable and proven standard aluminium chassis. Both options are tailored to meet the needs of elite racers.  The carbon fiber option is…
Japanese engine manufacturer O.S. Engines has released its latest .12 1:10 Onroad competition engine, the O.S. Speed T1205.  Based on T1204, it features a redesigning crankshaft and revised needle taper angle.  The newly designed crankshaft for improved power delivery from low to mid end performance.  The revised needle taper angle has expanded the adjustment range.  Using the well-received outer head shape from T1204 this gets a new laser design.  Also available as a Combo set,  this comes with TT03 EFRA2700 tuned silencer and the newly developed MT04 exhaust manifold. View more images & specs here
LensBodies has introduced their latest new 1:12 body shell, the Ponente 2.0.  Following the success of the first version of the Ponente body, the second version has been developed together with the Italian body producer’s brand ambassador and driver Alexander Hagberg.  The 2.0 gives you more corner speed, with a good balance between front grip and rear traction and is available in Ultra Light, Light, as well as Standard versions.  The bodyshell will be available at this weekend’s EFRA 1:12 European Championship in Belgium, and will be available from usual outlets in 10-days time. View more images here
Southern Carolina based Offroad bodyshell manufacturer Leadfinger Racing has released its Retro-Mod Buggy Body for the Mugen Seiki MSB1 1:10 2WD Buggy.  The Retro-Mod Buggy Body is a nostalgic throwback that pays homage to the golden era of RC racing with its design capturing the essence of classic RC aesthetics while incorporating modern engineering and performance enhancements.  Perfect for enthusiasts and collectors alike, the Retro-Mod Buggy Body brings back the iconic style of yesteryears.  The body is sold clear and ready for paint with included window masks and LFR logo stickers. View more images here

News

Social sharing

Who's Online

We have 233 guests online