TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  Next 
  •  End 
  • »
Page 1 of 2
Apr 2011
Thursday, 28 April 2011 09:29

Arrowmax RX8 ventilated brake disk

Written by Administrator

Arrowmax will release this new ventilated brake disk for Xray RX8 chassis. CNC machined from high quality steel it features multiple holes, some with air channels, to ensure the best heat dissipation and friction, while also remaining lightweight and durable.

Source: Free Max [freemaxmp.com]

Thursday, 28 April 2011 09:26

Team Orion Carbon FLX LiPo packs

Written by Administrator

Following the success of the hard case packs developed specifically for the 1/10th scale Traxxas E-Revo & Summit as well as the 1/16th scale Traxxas E-Revo, Summit and Slash platforms, Team Orion has designed a hardcase pack to maximize the capacity and overall performance of the HPI Savage Flux. It provides a perfect fit and combines LiPo technology with maximum capacity to help push the Savage Flux to its limits. Featuring a carbon look special hard case, up to 45C discharge rate and it comes in 2S and 3S Versions with Deans connector fitted, so it can go into any HPI cars without modifications. Available in 4000mAh, 6000mAh, 8000mAh 2S and 4000mAh and 6000mAh 3S versions.

Source: Team Orion [teamorion.com]

Thursday, 28 April 2011 09:23

JConcepts TLR 22 Punisher body

Written by Administrator

The Punisher body by JConcepts for the TLR 22 is the meanest, nastiest thing out for 1/10th buggy racing. The slight cab-forward treatment is amongst the most aggressive in class giving the Punisher top notch performance. Blended wing / body design gives additional down-force to the side-pods and windshield which increases driveability, corner speed and jump control. The rear base of the cab area represents the latest offering for 1/10th buggy racing featuring a rear scoop allowing additional tune-ability and cooling for high-performance racing. The Punisher body includes both cut-lines so the user can trim to either rear or mid motor chassis configurations. In addition to the newly designed body JConcepts has included 2 of the popular 6.5″ wide high down force V-wings that are commonly used around the world.

Thursday, 28 April 2011 09:21

Much More Hybrid charger now in red

Written by Administrator

Much More have announced that their Hybrid balance charger and discharger will now also be available in red. It joins the standard black, blue, grey and recent addition purple and is available now.

Source: Much More [muchmoreracing.net]

Thursday, 28 April 2011 09:20

Answer RC lightweight locking wheel nuts

Written by Administrator

The new lightweight locking wheel nuts from Answer RC are now available. Designed to offer the best of both worlds, security and performance, the security aspect is two fold. Firstly the have a knurled section machined into the back of the nut to allow it to lock onto the wheel and secondly the nuts come with O Rings that seat into the back of the nut to secure the nut against the wheel stub axle and prevent vibration loosening. The nuts come with 8 o-rings giving you a complete spare set. The nuts are machined away on the faces and drilled into to save weight and as with any closed cap wheel nut, knowing that the stub axle will not get mangled up is always a welcome benefit. Available in red and black in both 1.0mm and 1.25mm threads.

Source: Answer RC [answer-rc.com]

Thursday, 28 April 2011 09:09

Nosram Stealth Touch Evolution charger

Written by Administrator

Nosram has released the Stealth Touch Evolution charger & discharger. The vampire red backlit touch screen display means you won’t find any button on this device. With the graphical user interface, all parameters can be set quick and easy with the menu structure intuitive and easy to use. An integrated LiPo/LiFe balancer detects differences in the cells and starts balancing automatically. Improved performance and longer lifetime of the batteries are guaranteed.

Charge LiPo, LiFe, NiMh & NiCd
- Adjustable fast charge from 0.1 to 12.0A
> 1-4 cells LiPo, LiFe with automatic lipo/lifepo cut-off
> 1-8 cells NiMh & NiCd with adjustable delta-peak detection and optional 4-step charge mode
- Autostart-timer for maximum comfort
- Storage mode: the battery is charged/discharged automatically for longest cell lifetime

Cycle LiPo, LiFe, NiMh & NiCd
- Automatic cycling mode (discharge – charge – discharge) for perfect conditioning of your batteries

Discharge LiPo, LiFe, NiMh & NiCd
- Adjustable high-power discharge current (up to 20.0A) and cut-off voltage to perfectly match your batteries

Features
- Touch screen graphics display, vampire red backlit
- Fully adjustable: intuitive program structure with graphical user interface, allows precise adjustment of all parameters
- User profile memory: 5 factory pre-set profiles that can be customized, re-named and saved in memory
- Microprocessor controlled: fully adjustable for perfect operation, maximum performance and highest safety
- 4-way protection system: 100% protection against output reverse polarity, short circuit, input voltage error and over charge
- Voltage calibration for maximum accuracy
- DC input 11-15V
- Charge power 140W

Race report by Jason Nugroho

Round 1 of the Indonesia National Truggy Championship was held on March 20, 2011 at Graha Raya Bintaro, Tangerang (about 45km from the center of Jakarta city). There were a total 16 racers. The race format was 3 rounds of 10min qualifying, using the “1 best round” system and two groups of finals (A-B) with 5 drivers bumping up.

After qualifying I was in 2nd place out of the 16 racers. I went into the 45min A-final and started 2nd on the grid. As usual, my car got hit by other cars in the final round and dropped me back to 10th place.

This time it was not so easy to take back the lead since the track was not so big. I pushed my car very hard until I got a best lap at 36.817sec – about 2.5sec faster than my previous best lap of 39.217sec in the qualifying round. I got into 2nd place around 3 minutes before the end of the race, but something happened at the last moment with my car flipping at the last corner before the timing loop and this made me finish in 3rd place.

A-final results after 45min race :

1. Adrian

2. Febril

3. Jason Nugroho – XRAY XT8

Tuesday, 05 April 2011 15:29

T-Work’s Racing M11 transmitter skins

Written by Administrator

Similar to their previous release, T-Work’s Racing have a new skin decal for the Airtronics/Sanwa M11 and M11X transmitter. Available in 3D graphite or shiny graphite versions, it is easy to apply, will stay in good condition for a long time and when you want to remove it, it wont leave any nasty residue. Supplied pre cut on an A4 sheet.

Source: T-Work’s [rc-tworks.com]

Tuesday, 05 April 2011 15:28

Picco Boost aluminium carburetor

Written by Administrator

New from Picco is the Boost (Buggy) aluminium carburetor which is designed to optimize drivability and reliability of your engine. Available only as optional it features a 2 o-ring high speed needle, optimized spray-bar, long low-speed needle, easy to adjust idle screw, composite insulator bushing and it fits all Boost and P-Series engines.

Source: Picco [teampicco.com]

Tuesday, 05 April 2011 15:27

Americans dominate first ever EOS qualifier

Written by Administrator

The Euro Offroad Series’ first ever round of qualifying has been dominated by American drivers with Team Associated’s Ryan Cavalieri topping 4WD in both buggy & Short Course truck while Team Losi Racing’s Dustin Evans reigned over 2WD.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  Next 
  •  End 
  • »
Page 1 of 2

News

Social sharing

Who's Online

We have 124 guests online