TQ R/C & Hobbies

Tamiya Indonesia Championship 2018

  • Seri 1 : 11 Maret 2018 - Sunter International Speedway
  • Seri 2 : 22 April 2018 - East RC
  • Seri 3 : 22 Juni 2018 - To be advised
  • Seri 4 : 22 Juli 2018 - Sunter International Speedway
  • Regulations attached PDF

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Apr 2012
Apr 2012

Apr 2012 (8)

The EDS multi driver is a handy wrench with a total of seven tool tips that are stored within the handle. Included in the basic set are 1.5mm, 2.0mm, 2.5mm and 3.0mm hex tips as well as 3.5mm flat head and 3.0mm and 4.5mm Phillips tips. The handle is CNC-machined from aluminium and comes red anodised. Additionally available are several hex, ball hex and nut driver tool tips.

Xray introduce the XCA centrifugal axial reverse clutch set for the NT1 200mm nitro chassis. The set includes redesigned components which create a more dynamic clutch engagement suitable for most racing conditions, such as a super-lightweight flywheel, new black reinforced clutch flyweights, new smaller and super lightweight clutch bell, smaller diameter yellow clutch shoe, new conical clutch washer spring set, and a new aluminium clutch disc. Not included are the needed pinion gears.

JConcepts introduce the green compound Crossbows 1/8 buggy tyres. The tyre that dominated the 2008-2009 IFMAR World Championships is now available in the super soft Green compound. The tyre combines a compact tyre body with crisp tread and separation and an aggressive rectangular lug technology. Included are closed cell profiled inserts.

Sanwa/Airtronics have introduced the M12, the new flagship transmitter which will replace the famous and very successful M11 unit. The new M12 claims to feature super high speed response (SSR) to the point where there is instant reaction to the drivers input for the ultimate driving feel. The new system also allows you to program the D/R settings to allow you to change trim or a curve in an instant to react to the changing conditions. The transmitter has also been made significantly lighter compared to its predecessor thanks to changes to the radio’s internal structure. Finally the M12 allows you to integrate a telemetry function to record your throttle and steering inputs and with extra sensors to recorder the RPM, voltage, temperature and further inputs.

Novak Electronics is introducing the smallest, most complete and feature-packed brushless ESC to date, the Impact Racing Brushless ESC with X-Drive. This pure, sensor-based brushless racing ESC is designed to accommodate the extreme demands of electric 2WD 1/10th scale off-road racing, the tight confines of 1/12th pan car racing, and is perfect for nearly all 1S and 2S LiPo racing classes. The Impact features Novak’s X-Drive for ultimate driving performance, and Novak’s new Super-Tuner firmware for faster set-up changes and more adjustability than ever before.

MaxAmps announces the new internal plug option for the Race Edition 6500 7.4v 150c and the 5450 7.4v 120C LiPo packs. Unlike other bullet style connectors, there is no chance of reversing polarity since both the balancer and main Traxxas HC plugs are keyed and they are specifically designed for vehicles with longer battery trays. The balancer tap is also built into the pack and offers a very clean look, both inside and outside of your vehicle.

Bliss RC introduce the new F7 On-Road engine featuring a hand-tuned 7-port ABC liner, modified piston and a new carburettor and crankcase design. Other features are an aluminium/plastic composite carburettor with 8mm and 9mm venturi inserts, lightened cooling head, a conical conrod. The 1/8th scale engine comes including EFRA 2102 exhaust, silicone gaskets and mounting springs.

The ProTek Prodigy 620 Duo is a multi-chemistry charger with two independent 400 watt channels, each with its own independent control panel, blue backlit LCD display, balance ports and sensor ports. It can charge LiPo, LiFe, or Li-Ion batteries up to 6S, 15-cell NiCd or NiMH batteries, and lead-acid batteries up to 20V. With the ability to fast charge, balance charge, and storage charge lithium cells, you can easily tailor the charge process to suit your needs, while individual cell voltage can be monitored during balance mode charging, allowing you to identify an imbalance in the cells and spot a weak cell before it becomes a problem. Other features include a dual-fan cooling system that utilises a push-pull design that will keep the charger cool, even when working at maximum capacity.

Social sharing

Visitors

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday246
mod_vvisit_counterYesterday622
mod_vvisit_counterThis week3846
mod_vvisit_counterThis month15108
mod_vvisit_counterAll2233905

Who's Online

We have 45 guests online