TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  Next 
  •  End 
  • »
Page 1 of 2
May 2012
May 2012

May 2012 (15)

Durango have released full details on their all new DNX408T 1/8th scale truggy. Based heavily on their successful DNX408, the truggy features heavy duty machined alloy suspension hangers front and rear, as well as bulkheads to hold the gearboxes securely in position. The machined alloy parts as standard continue to the brake bulkheads and shock towers, perfect for supporting the 15mm big bore shock absorbers. The all-new, spiral design, machine-cut gears for the DNX408T, have been extensively tested for performance and reliability. Full details can be found on the car’s product page (link below).

The Team Grid drop-in camber tuning kit enables vertical camber link tuning on the Associated TC6 and TC6.1 touring cars. This kit utilizes the existing holes on the front and rear shock towers for infinite vertical camber link ball tuning. Since most racers are using the #1, #3 and #7 camber locations on the stock towers, the Team Grid camber kit allows for the exact use of these camber holes along with the flexibility of the inverted ball link system, which provides added positive and negative vertical adjustments from these locations. The camber kit also includes an extra tuning hole between #1 and #7 for even more tuning capabilities. Any 3mm spacer from 0.1 up to 6mm can be used for all the tuning.

Hiro Factory have announced the release of their new F103/F104/F104W conversion called the HRF10X. Designed by Japanese driver Hiro Nakatani using his extensive race experience the chassis has already won the 4th round of F1RCGP in Japan as well as the Futasan Cup. The conversion is equipped with a 7075 aluminium motor plate with ball-style rear link suspension similar to that used in direct drive chassis’ and adopts a carbon W-style chassis for ideal chassis roll. A side spring & aluminium roll damper control ensure stability and ease of setup.

New for the Serpent 747 are these purpose made brass slide-weights which can be mounted into the slots pre made in the 747 chassis. Weighing 25 grams each, a maximum 3 can be fitted, they are black coated, laser engraved and come with the correct mounting screw. The chassis has 3 slots for the slide-weights, which slide in position and are secured with the screw and the chassis and set-up sheet show lines to indicate and record the set position. This is a very easy and fast setup change which has a lot of influence on the cars balance and handling.

Novarossi have introduced their new 9886 polished exhaust pipe. The EFRA homologated 2-chamber pipe is suitable for both on and offroad and this super strong version has been made with thicker aluminium for extra strength in the event of an impact.

Roche have introduced their new red color flex sensor cables. Made with 26GA super flex red color silicone wires with golden coated connector they are available in 100mm & 200mm length versions.

T-Work’s have produced this aluminium pinion gear holder for M1 pinion gears. Most 1/8th and Short Course electric motors are designed to use M1 pinion gears which fits onto a 5mm armature shaft. This convenient holder will take up to 10 M1 pinion gears and comes in black, red, orange and Tamiya blue. T-Work’s also makes the same pinion gear holder for 1/10th pinion gears.

3Racing’s new High Downforce lexan front wing for direct drive F1 chassis, fits the Tamiya F103, F104, their own F109 and soon to be released F113. The front wing has been designed and tested for the purpose of performance under racing conditions. The replaceable airfoil part of the wing is made of clear polycarbonate while the main nose part is made of impact resistant composite plastic providing the necessary structural integrity.

The Shizuoka Hobby show takes place this weekend in Japan and KO Propo will be there showing off a large number of new parts for their recently released EX-1 modular transmitter. First up is the new Kyosho MiniZ specific EX-1 Master Unit for ASF 2.4GHz cars, this is in addition to all the other separate KIY parts such as the standard FHSS Master Unit, the standard steering unit, stick type unit and regular grip unit all of which will be available to buy separately in the next month. The grip unit is also available in a left handed version and for the base of the radio there is the anticipated counter weight set which comprises of two brass weights in 42 and 14.4 grams. Other new parts available next month for the EX-1 include regular and large handle grip sets in grey, green and black.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  Next 
  •  End 
  • »
Page 1 of 2

News

Social sharing

Who's Online

We have 565 guests online