TQ R/C & Hobbies

Tamiya Indonesia Championship 2018

  • Seri 1 : 11 Maret 2018 - Sunter International Speedway
  • Seri 2 : 22 April 2018 - East RC
  • Seri 3 : 22 Juni 2018 - To be advised
  • Seri 4 : 22 Juli 2018 - Sunter International Speedway
  • Regulations attached PDF

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Jul 2015
Jul 2015

Jul 2015 (8)

Horizon Hobby have introduced the all-new Losi Audi R8 LMS Ultra FIA GT3 1/6th scale RTR kit. The full-scale car is one of the fastest R8 in racing and the Losi model is designed to match its performance on the model racing track. Based on a 3mm aluminium chassis the car features torque vectoring differentials for improved traction, 18mm big bore shock absorbers for best possible handling and a 1200kv 6S-compatible Dynamite brushless motor to propel the car to speeds of up to 100km/h. The Active Vehicle Control technology helps to control the car at high speed and in fast corners. The kit is topped off by an officially licensed Audi R8 WRT Racing Team bodyshell with rear wing, diffusor and mirrors.

VBC Racing have introduced the new Ghost Evo RM Spec 1/10th 4WD touring car kit. Released to celebrate the success of Australian National Champion Ryan Maker the RM Spec kit features a load of upgrades and options such as the Ghost Evo camber link adjusters, a 2-piece joint axle drive kit, X/Y-C05 and C0 centre suspension mounts, the Wildfire suspension shim set, Titanium-coated upright shafts, suspension pins and shock shafts, self lubricating shaft end shoes and more. Other features are taken over from the standard Ghost Evo kit such as the carbon fibre chassis and shock towers, large travel aluminium shock absorbers, oiled low-friction and rubber sealed ball bearings as well as aluminium turnbuckles.

Coming soon from LRP are the Outlaw Car Line high-voltage hardcase LiPo battery packs. Thanks to the new HDS-X high density stacking technology the packs have a nominal voltage of 7.6V compared to the standard 7.4V of current 2S batteries. To make maximum use of the added voltage the batteries need to be charged to 8.70V using chargers with special charge programs or adjustable charge end voltage with the high-performance 110C/55C cells allowing for charge rates as high as 3C. Both the 8000mAh standard size and 4900mAh shorty battery do not comply with the current rules of governing bodies such as IFMAR, EFRA, ROAR and others so they are banned from competition use but they can be run in outlaw classes or in your favourite bashing vehicle.

Hiro Factory have introduced the 2015 version of their HRF12X 1/12th scale pan car. Available as complete kit or conversion kit for existing HRF12X cars the 2015 spec kit features a redesigned main chassis plate made from US-made high-quality carbon fibre. It is meant to have optimised flex characteristics which is further helped by the new floating servo mount that makes for perfect chassis symmetry and improved left-to-right handling. The chassis also allows for several battery positions including a forth and back placement and a new side link position creates a 4WS effect for more agile handling if needed. Included with the kit also come several 7075 aluminium parts including the front bulkhead, upper arm mount, turnbuckles, damper mount, motor mount and hubs. The kit is rounded out by a large volume, hard-coated aluminium centre shock absorber.

Shepherd have introduced another option part for the Velox V8 1/8th on-road car in the form of an aluminium shaft for the use on the middle bearing block. Compared to the standard shaft the aluminium part saves about 65 percent of weight, resulting in improved acceleration. The shaft comes hard-coated for wear and is available now.

Made for Yokomo’s Drift Package cars with RWD option is the new aluminium steering knuckle set. The knuckles feature five different upper camber link positions and four different steering Ackermann points to allows for a wide range of steering scrub, trail, kingpin angle and Ackermann adjustments including positive and negative Ackermann settings. Included in the set are the left and right steering blocks, 1050 bearings and new wheel axles.

Sweep Racing have introduced the all-new Evo16 multi-spoke rim for 1/8th GT vehicles. Designed to comply with the IFMAR rules the 16-spoke wheel offers a very realistic look, large 5mm venting holes and it is made from race-proven black or white colour ROK resin.

Coming in mid-August is Spektrum’s latest sport receiver, the SR415 ideal for anyone wanting a robust 4-channel receiver that can handle the worst nature and the RF environment you can throw at it. It’s built around frequency-agile DSMR technology that delivers superb range and response, especially in places where a lot of 2.4GHz systems are in use at once. This signal security is complemented by a fuel-proof case and a waterproof Reliakote coating that seals internal electronics from the elements and other corrosives like nitro methane and motor spray.

Social sharing

Visitors

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday251
mod_vvisit_counterYesterday622
mod_vvisit_counterThis week3851
mod_vvisit_counterThis month15113
mod_vvisit_counterAll2233910

Who's Online

We have 58 guests online