TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Jan 2017
Jan 2017

Jan 2017 (7)

Muchmore have introduced the AAA battery auto cut-off discharge tray. Designed for AAA-size batteries exclusively the discharger tray is usable without additional power sources and it helps to maximise battery life and performance by securely discharging each cell individually down to a voltage of 0.9V. The tray features screw-type contacts and retainers, indicating LED lamps and a heat-dissipating aluminium case.

Kyosho have introduced the PureTen FW-06 GP Audi R8 LMS Red ReadySet 1/10th scale nitro on-road kit. The proven, shaft-driven FW-06 4WD chassis offers mild control responses, making it the perfect introduction to GP touring cars. A 2-speed automatic transmission and the high-power GXR15 engine combined with the same rear suspension as the World Champion V-One RRR also meet the demands of expert-level drivers, making the car race-worthy as well. Included with the ready-to-run package also comes a 2.4GHz Syncro KT-231P transmitter with failsafe function and the kit is decked off with a red Audi R8 LMS bodyshell.

Japanese company KO Propo have introduced the RSx3 line of standard size high-performance servos. The range includes the RSx3 Response HC (0.06s/17.6kg-cm) and RSx3 Power HC (0.11x/31.6kg-cm) with aluminium upper cases as well as the RSx3 Response (0.06s/17.6kg-cm) and RSx3 Power (0.11s/31.6kg-cm) with composite upper cases. All four feature aluminium middle sections with laser-etched graphics, they are high-voltage compatible, allowing to use them with up to 7.4V input, they are equipped with hard-anodised aluminium gears, coreless motors, gold-plated connectors and black servo leads. On top of this the RSx3 line makes use of KO Propo’s new Highspeed Communication System HCS, in combination wit HCS-compatible receivers, for a more linear steering feeling and they are programmable using the company’s ICS Servo Manager software in order to fine-tune the servo’s behaviour for different classes or track conditions.

Coming this February is Schumacher’s new Cougar KD dirt spec 2WD buggy kit.  Designed for low-traction dirt tracks the prototype of the buggy already showed some great performance at the European Off-Road Championships in Spain where Schumacher factory driver Michal Orlowski finished third on the podium. The KD has the adjustability to conquer loose dirt to hard packed clay tracks as well as other low-grip surfaces thanks to a new 3-gear stand-up gearbox with 14-ball differential and a newly designed 2.5mm aluminium chassis that is usable with a range of battery layouts including saddle, square and shorty. Carbon fibre side pods make for advanced chassis stiffness tuning and an updated suspension geometry ensures fast and consistent handling. Other features include shocks with bleed screw and vented options, a lightweight twin-pad slipper clutch and a new sleek bodyshell.

Coming soon from Spektrum is the S6240RX digital high-speed servo and receiver unit. The servo itself features the durability of metal gears and is capable of delivering down to 0.08s transit times along with 15.0kg-cm of torque. The built-in SR2010 2-channel receiver gives racers a sense of response that feels almost instantaneous, especially when used with a DSMR radio capable of 5.5ms transmission. Both the servo and receiver are housed in a 20mm case that measures 30mm in hight which is in-between a standard and a low-profile servo. The servo and receiver unit is best used for 2WD buggy applications but may also suit many other classes.

Highest have introduced the new high-voltage compatible D1000 servo with all-aluminium case. Capable of speeds down to 0.08s and offering a dynamic torque of 14.8kg-cm the coreless motor standard-size servo is ideal for off-road applications and a popular choice of Highest team drivers such as David Ronnefalk and Robert Batlle. The search offers a full-aluminium case including upper and lower case as well as the middle section and it is available now.

Team Corally have introduced the Eclips 2100 Limited Black Edition AC/DC dual output charger. It offers the same specifications as the standard variant but it comes with a black and red case design and a special carry case with embossed Team Corally logo, balance boards and charge leads. The device is limited to 400 pieces world-wide and it is available now.

News

Social sharing

Who's Online

We have 534 guests online