TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Subaru BRZ R&D Sport 2014 Rd.2 Fuji (TT-02 Chassis)

Wednesday, 04 March 2015 21:03 Published in Tamiya

1/10 Electric R/C Car Series No.607

Subaru BRZ R&D Sport 2014 Rd.2 Fuji (TT-02 Chassis)

Item No: 58607

GT Fighter
This R/C model assembly kit recreates an entry in the GT300 class of the 2014 Japanese Super GT racing series that featured a turbocharged 4-cylinder boxer engine and tight cornering thanks to a low center of gravity. Drivers Kota Sasaki and Takuto Iguchi achieved stand-out results such as second in Rd.3 at Autopolis and a pole-to-flag win in a wet Rd.5 in Fuji. The form of the car, a wider low-bonnet version of the road model, is depicted faithfully in polycarbonate. Separate parts are included in the kit to recreate the side mirrors and rear wing, and markings are provided to recreate BRZ and sponsor logos, as well as car numbers.

Adaptable TT-02 Chassis offers balanced shaft driven 4WD
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Black mesh-type wheels are paired with racing slick tires.

Specifications
●Length: 442mm, Width: 191mm, Height: 115mm ●Wheelbase: 257mm ●Tire Width/Diameter: 27/67mm (Front & Rear) ●Bathtub-type Frame ●Shaft-Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 8.27:1 (10 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ●Type 540 Motor ●Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
●2-Channel R/C Unit with ESC ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of March 3, 2015. Specifications are subject to change without notice.

Mini 4WD Car Dimension Checker

Sunday, 15 June 2014 21:45 Published in Tamiya

Limited Edition Mini 4WD Product

Mini 4WD Car Dimension Checker

Item No: 95037

★Check whether your machine dimensions comply with the official Mini 4WD competition rules using this handy box.
★Box is made from smoke-colored acrylic with the Mini 4WD logo printed on the bottom.
*Please note official measurements taken by staff at Mini 4WD events are final.
*Mini 4WD car is sold separately.

The information on this page is current as of June 6, 2014. Specifications are subject to change without notice.

Zakspeed Jägermeister Ford Capri Turbo Gr.5 (TT-02 Chassis)

Thursday, 27 February 2014 23:18 Published in Tamiya

1/10 Electric R/C Car Series No.590

Zakspeed Jägermeister Ford Capri Turbo Gr.5 (TT-02 Chassis)

Item No: 58590

★This R/C model recreates the car which took part in the 1982 DRM (German Racing Championship) 1982. ★The wide and low form was born of wind tunnel testing, and is faithfully captured by this model's polycarbonate body. Light cases and rear wing are depicted using separate parts. ★Stickers are included to recreate the car's distinctive markings. ★The model runs on the high-drivability, easy-maintenance TT-02 chassis.

Information is correct as of February 7, 2014. Specifications are subject to change without notice.

Volkswagen Type 2 (T1) Wheelie Custom Version (WR-02 Chassis)

Thursday, 27 February 2014 23:13 Published in Tamiya

Limited Edition R/C Product

Volkswagen Type 2 (T1) Wheelie Custom Version (WR-02 Chassis)

Item No: 84373

【 Limited Edition; Unlimited Style! 】 This R/C assembly kit depicts a 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of fans. This comical interpretation of the distinctive 23-window body style is reproduced in durable polycarbonate and an injection-molded driver figure is also included. Designed with a wheelie bar to enable fun, wheels in the air driving action, this limited edition model features white chassis parts, silver color metal-plated side frames, and two-tone white and black bumper parts. Black metal-plated wheels give the model a cool finishing touch.

【 Put Your Wheels in the Air! 】 The WR-02 chassis features a heavy duty integrated gear case/monocoque unit which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to the rear of the model to enable exciting wheels-in-the-air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly.

【 Specifications 】 ●1/12 Scale ●Length: 345mm, Width: 270mm, Height: 270mm ●Wheelbase: 170mm ●Weight: 1,360g (not including R/C units and battery pack) ●Type 540 Motor ●Rear-Wheel Drive ●Tire Width/Diameter (Front & Rear): 113/70mm ●Tread: 265mm (Front), 270mm (Rear) ●Monocoque Frame Chassis ●3-Bevel Differentials ●2-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Gear Ratio=1:18.3

【 Separately Required Items 】 ●2-channel R/C Unit with ESC ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of February 21, 2014. Specifications are subject to change without notice.

1/14 Tractor Truck Option Parts Series No.23

Tractor Truck Multi-Function Control Unit "Euro-Style" (MFC-03)

Item No: 56523

★Add a whole extra layer of authenticity to your 1/14 scale R/C tractor truck with this unit, which realistically recreates lights, sounds and vibrations! The sounds were recorded from an actual L6 engine, which is one of the main units employed in European trucks. ★Features 33 sounds, 16 light functions, and 21 transmitter-controlled operations.

The information on this page is correct as of February 13, 2014. Please be aware that specifications may be changed without notice.

U.S. 2 1/2ton 6x6 Airfield Fuel Truck

Thursday, 27 February 2014 22:47 Published in Tamiya

1/48 Military Miniature Series No.79

U.S. 2 1/2ton 6x6 Airfield Fuel Truck

Item No: 32579

★The 1/48 Scale Military Miniature Series welcomes the U.S. 6x6 fuel truck, which was put to work in WWII refueling aircraft, servicing engines, and more. ★The model faithfully replicates the form of the truck with hard-top cabin roof and large tank. ★Tank side doors can be installed in open or closed position, and when open show off the detail on the hose and reel. ★2 figures depicted in the act of refueling, plus 2 marking options are included. *Vinyl tubing is used to recreate the fuel hose.

The information on this page is current as of February 7, 2014. Specifications are subject to change without notification.

Fine Surface Primer L for Plastic & Metal (Oxide Red)

Thursday, 27 February 2014 22:05 Published in Tamiya

Finishing Materials No.160

Fine Surface Primer L for Plastic & Metal (Oxide Red)

Item No: 87160

★This primer recreates the color of anti-rust paint used as primer on military vehicles. It can be used not simply as an undercoat, but also as a topcoat. ★Provides an excellent base when painting photo-etched parts and other difficult-to paint surfaces. ★Can contains 180ml.

The information on this page is current as of February 7, 2014. Specifications are subject to change without notice.

XB Ford Zakspeed Turbo Capri Gr.5 Würth (TT-02 Chassis)

Tuesday, 08 October 2013 17:03 Published in Tamiya

1/10 Expert Built Series No.163

XB Ford Zakspeed Turbo Capri Gr.5 Würth (TT-02 Chassis)

Item No:57863

【 The Meister of 1981 is Ready to Roll 】 The Ford Zakspeed Turbo Capri Group 5 car featured a 1,427cc four-cylinder DOHC engine matched with a stretched body that was the result of extensive wind-tunnel testing and was far evolved from the original 2-door Capri road version. In the 1981 running of the German Racing Championship (DRM), three years after its initial entry, the car was sponsored by the German auto parts maker Würth and left the rest of the field in its wake as it surged to the Championship. Now, the legendary machine is recreated by this factory finished 1/10 scale R/C model. The wide and low form is accurately reproduced by the pre-painted and decorated polycarbonate body, including the big overhanging front/rear fenders, and the model also features gold 2-piece Mesh wheels, with the rear pair wider than those at the front.

【 Adaptable TT-02 Chassis offers balanced shaft driven 4WD 】 The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it offers 4-wheel double wishbone suspension plus sealed 4-bevel differentials for a smooth ride. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. The included forward/reverse ESC (Electronic Speed Controller) allows smooth driving.

【 2.4GHz Transmitter included 】 In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only. Transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation.。

【 Specifications 】 ●Length: 488mm, Width: 205mm, Height: 124mm ●Wheelbase: 251mm ●Tire Width/Diameter: 27/67mm (Front), 33/67mm (Rear) ●Bathtub-type Frame ●Shaft Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 8.27:1 ●Type 540 Motor ●Electronic Speed Controller (Forward/Reverse Type)

【 Separately Required Items 】 ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of October 2, 2013. Specifications are subject to change without notice.

British LRDG Command Car North Africa (w/7 Figures)

Tuesday, 08 October 2013 16:57 Published in Tamiya

Military Collection No.7

British LRDG Command Car North Africa (w/7 Figures)

Item No:32407

★The LRDG was a British unit which operated largely in the North African conflict with German forces. ★This model depicts a command car together with 7 LRDG soldier figures in realistic poses, including 2 commanders and a driver. ★The set also includes a number of jerry cans, oil drums, bags and other accessories which will prove invaluable in creating dioramas. ※Some figure parts manufactured by Masterbox Ltd..

The information on this page is current as of September 6, 2013. Specifications are subject to change without notice.

1/20 McLaren Mercedes MP4-13

Tuesday, 08 October 2013 16:52 Published in Tamiya

Limited Edition Static Model

1/20 McLaren Mercedes MP4-13

Item No:89718

★The champion of the 1998 Formula One season is recreated in 1/20 scale. ★The model authentically recreates the car's high-nosed, sharp form. ★Removable rear cowling parts allow appreciation of the engine, radiator and rear suspension, even after the model is completed. ★Also features faithful depictions of the stepped underside and diffuser. ★Marking options and steering wheels included to recreate the car driven by M.Hakkinen or D.Coulthard.

The information on this page is current as of September 12, 2013. Specifications are subject to change without notice.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  Next 
  •  End 
  • »
Page 1 of 2

Social sharing

Who's Online

We have 226 guests online