TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

1/24 Volvo A60H 6x6 Dump Truck (G6-01)

Sunday, 15 March 2020 16:04 Published in Tamiya

Electric R/C Car Series No.676

1/24 Volvo A60H 6x6 Dump Truck (G6-01)

Item No: 58676

★This assembly kit R/C model depicts the Volvo A60H dump truck that is employed in some of the toughest workplaces in the world. ★Features a polycarbonate cab and molded ABS plastic rear bed section. ★The model is based upon the sturdy 6x6 gear-driven powertrain G6-01 chassis.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

1/10 Volkswagen Karmann Ghia (M-06)

Sunday, 15 March 2020 16:02 Published in Tamiya

Electric R/C Car Series No.677

1/10 Volkswagen Karmann Ghia (M-06)

Item No: 58677

★The Karmann Ghia is a legendary early coupé car first released in 1955, and now makes a welcome appearance as an R/C car assembly kit. ★Its luxurious, flowing form is depicted by a lightweight and durable polycarbonate body. ★Front and rear bumpers, light cases and side mirrors are recreated using metal-plated components. ★The model is based upon the rear motor, rear-wheel drive M-06 chassis.

Information is current as of March 4, 2020. Specifications are subject to change without notice.


1/10 TT-02 Type-SR Chassis Kit

Sunday, 15 March 2020 16:01 Published in Tamiya

Special Edition R/C Product

1/10 TT-02 Type-SR Chassis Kit

Item No: 47439

★This assembly kit creates a special spec TT-02 chassis with reversible suspension and plenty of other Hop-Up Option parts. ★Rear features a suspension mount and bushings that can be used to make precision adjustments to setup. ★Its smooth, efficient drivetrain employs front double cardan and rear lightweight swing shafts. ★Hex head screws come as standard.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

1/10 1996 Porsche 911 GT1 Street (TA03R-S)

Sunday, 15 March 2020 15:59 Published in Tamiya

Special Edition R/C Product

1/10 1996 Porsche 911 GT1 Street (TA03R-S)

Item No: 47443

Length: XXXmm. Image shows painted and assembled kit.

★This is an assembly kit R/C model depicting the 911 GT1 car crafted by Porsche in 1996 for endurance racing. ★The glamorous, high-powered body is recreated in polycarbonate, with separately molded plastic wing and side mirror components. ★Its TA03R-S chassis is a short wheelbase unit with belt-driven 4WD. ★Wide rear tread is achieved by using offset wheels.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

Buggy Champ Ball Differential Set 2

Sunday, 15 March 2020 15:57 Published in Tamiya

Hop-Up Options no.1897

Buggy Champ Ball Differential Set 2

Item No: 54897

★This set includes ball differential parts for smooth cornering and a stable off-road ride. ★Can be adjusted while in the model. ★Includes an 1150 thrust ball bearing plus dedicated diff shaft and differential interior components. ★For use on the Buggy Champ, Sand Scorcher and Fighting Buggy models.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

T3-01 Aluminum Bearing Holders (Rear)

Sunday, 15 March 2020 15:56 Published in Tamiya

Hop-Up Options no.1932

T3-01 Aluminum Bearing Holders (Rear)

Item No: 54932

★Used in place of kit-standard A2 parts, these aluminum bearing holders give a surer rear axle and greater steering feel. ★Includes two aluminum bearing holders and four 3x8mm hex head countersunk screws. ★Recommended for use with Item 54933 T3-01 Rear Axle Weight Set.

Compatible Chassis
T3-01 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

T3-01 Rear Axle Weight Set

Sunday, 15 March 2020 15:54 Published in Tamiya

Hop-Up Options no.1933

T3-01 Rear Axle Weight Set

Item No: 54933

★This set features two different weight types, which can be used to add traction to the rear of the model, giving you even greater control. ★Includes two each of heavy (silver color) and light (black) weights, plus screws for attachment. ★Item 54932 T3-01 Aluminum Bearing Holders (Rear).

Compatible Chassis
T3-01 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

CC-02 Aluminum Arm Pivots (A, B)

Sunday, 15 March 2020 15:52 Published in Tamiya

Hop-Up Options no.1944

CC-02 Aluminum Arm Pivots (A, B)

Item No: 54944

★Used in place of kit standard plastic C5 and C6 parts, these aluminum pivots further strengthen your car's link arms, for fluid, ground hugging suspension. ★Screws will also be less likely to come loose in impacts. ★Aluminum components have a cool gun metal color anodized finish. ★Two sets are required to fit out the whole chassis. ★Screws and other small parts for attachment are included.

Compatible Chassis
CC-02 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

CC-02 Low-Friction 6mm Ball Collars (18pcs.)

Sunday, 15 March 2020 15:50 Published in Tamiya

Hop-Up Options no.1945

CC-02 Low-Friction 6mm Ball Collars (18pcs.)

Item No: 54945

★Used in place of kit-standard plastic ball collars (C9), these tough steel parts have a slick coating. ★Smooth arm motion translates into ground-hugging suspension. ★Compatible with kit link arms, steering linkage and battery plate.

Compatible Chassis
CC-02 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

TA07 Adjustable Ackerman Set

Sunday, 15 March 2020 15:46 Published in Tamiya

Hop-Up Options no.1949

TA07 Adjustable Ackerman Set

Item No: 54949

★Two different pivot mounts allow Ackerman angle adjustment, thereby altering the way your car handles, too. ★8mm width part (equivalent to kit standard) gives more moderate steering, and 8.5mm part gives sharper response. ★Can be used in place of kit standard T3. ★Aluminum components have a stylish blue anodized finish. ★Recommended for use with Item 54704 TA07 Aluminum Steering Arm Set.

Compatible Chassis
TA07 PRO, TA07 MS, TRF419, TRF419X, TRF419X WS, TRF419X & TRF420 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  4 
  •  Next 
  •  End 
  • »
Page 1 of 4

Social sharing

Who's Online

We have 618 guests online