TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Clamp Type Aluminum Wheel Hubs (Narrow Tread, 4pcs.)

Sunday, 15 March 2020 15:44 Published in Tamiya

TRF Series no.252

Clamp Type Aluminum Wheel Hubs
(Narrow Tread, 4pcs.)

Item No: 42352

★Narrow tread clamp type wheel hubs are a popular choice for touring car models. ★Employ a narrower tread on the front for sharper steering response, on the rear for improved grip, or even across the whole car! ★Aluminum parts have the iconic Tamiya blue anodized finish. ★Contains four hubs, plus five 1.6x4mm cap screws.

Compatible Chassis
TA06, TA06 PRO, TA06 MS, TA07 PRO, TA07 MS, TB-04, TB-04 PRO, TB-05 PRO, TB Evo.6, TB Evo.6 MS, TB Evo.7, TRF419, TRF419X, TRF419XR, TRF420 & TT-02 Type-S Chassis
*For use with 24mm width (medium-narrow) wheels. Items 53646 and 54573 may be required.

**The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

TRF Super Short Big Bore Dampers+ (4pcs.)

Sunday, 15 March 2020 15:41 Published in Tamiya

TRF Series no.253

TRF Super Short Big Bore Dampers+ (4pcs.)

Item No: 42353

6.5mm shorter than TRF Special Dampers, these dampers nonetheless have excellent oil capacity thanks to a 1.2mm larger internal aluminum cylinder diameter, which has a mirrored surface and HL coating for ultra smooth motion and minimal impurities finding their way into the oil. Performance is further enhanced by slick silicone O-rings and low-friction POM plastic pistons, plus aluminum spring retainers and titanium coated piston rods. Fitting these race spec dampers to your car will contribute to superior steering response and speedy corner, particularly on high grip surfaces or technical tracks. They also allow use of body designs with lower bonnets. In addition to included components, other separately sold TRF Super Short Big Bore Damper springs are also compatible. ※Requires damper stays for TRF Super Short Big Bore Dampers plus Item 42344 5.8mm Ball Connector Nuts for TRF Dampers (8pcs.).

Compatible Chassis
TA07 PRO, TA07 MS, TB-05 PRO*1, TB Evo.7, TRF419X, TRF419XR & TRF420 Chassis
*1 Use with dedicated TRF Super Short Big Bore Damper Stay.

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of March 6, 2020. Specifications are subject to change without notice.

Reinforced Axle Shaft Set

Sunday, 15 March 2020 15:36 Published in Tamiya

Truck Option Parts Series no.54

Reinforced Axle Shaft Set

Item No: 56554

★Combined with their clamp type aluminum wheel hubs, these shafts provide excellent durability. ★Great for use when hauling big trailers or trucks, or when carrying big loads in a tipper truck bed. ★Also recommended for use with TROP series tuned motors. ★E-rings and other small parts are also included.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

Metal Display Antenna Set

Sunday, 15 March 2020 15:27 Published in Tamiya

Truck Option Parts Series no.55

Metal Display Antenna Set

Item No: 56555

★Add another layer of detail to your big truck with this set, which depicts an antenna and base. ★Utilizes metal parts, and a spring for super fit and protection in the eventuality of rollovers. ★Requires a 2mm hole for installation in your desired position. ★Small parts for attachment are included.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

North American F-51D Mustang Korean War

Sunday, 15 March 2020 15:25 Published in Tamiya

1/32 Aircraft Series No.28

North American F-51D Mustang Korean War

Item No: 60328

★This is a maiden appearance in detailed 1/32 for the F-51D Mustang that was deployed in hostilities during the Korean War. ★V12 engine is recreated with aplomb. ★Includes recreations of the squared-off propeller tips, two types of radio equipment, and other features that set this aircraft apart from late-WWII variants. ★Comes with parts for two kinds of drop tank, 500lb bombs and 5-inch HVAR rockets.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

Russian Medium Tank T-55

Sunday, 15 March 2020 15:22 Published in Tamiya

1/48 Military Miniature Series No.98

Russian Medium Tank T-55

Item No: 32598

A Prolific Design
The T-55 was born in an era of increasing West-East Cold War tension, as an upgrade to the existing T-54. This low-profile design with hemispherical turret was extremely well suited to mass production, and even featured rudimentary protection from chemical weapons. It was also produced under license in Czechoslovakia and Poland, and when added with the T-54 its production run is said to have run to the astonishing number of 100,000 units. Warsaw Pact countries and Arab client states were among those who operated the T-55, meaning it saw significant action in the Middle East and even the Gulf War.

About the Model
★This is a 1/48 scale plastic model assembly kit. Length: 190mm, width: 69mm. ★The low form of the tank with hemispherical turret and 100mm gun is accurately captured. ★Weld lines and cast turret texture authentically recreated. ★Detailed model includes depiction of DShK-M anti-air machine gun. ★Assembly type tracks feature one-piece straight sections. ★Includes metal weights to give the model a realistically heavy feel. ★Comes with a commander torso figure and one marking option.

Information is current as of March 6, 2020. Specifications are subject to change without notice.

Special Edition Static Model

1/35 U.S. M8 Light Armored Car "Greyhound"
Combat Patrol Set

Item No: 25196

A Versatile Design
The M8 "Greyhound" was an important cog in the WWII U.S. military machine, a speedy light armored car with an open top turret and 37mm gun that could fire a range of different rounds. Some vehicles also had an extra ring mount. Possessing a rear mounted 110hp gasoline engine and six-wheel drive, this mobile car could reach speeds of up to 88.5km/h. 8,500 were produced between March 1943 and April 1944, and most were active in mechanized units in the European theater, some supplied to the Free French Forces and other Allied countries such as Great Britain, as well as other countries after the cessation of hostilities.

About the Model
★This is a 1/35 scale plastic model assembly kit. Length: 143mm, width: 74mm. ★Features a detailed rendition of the turret-mounted M1919 machine gun. ★The underside of the model has plenty to look at with realistic depictions of suspension, drive shafts and more. ★Left and right fender components are optional. ★This diorama-ready kit has a plethora of acessories including steel drums, ammunition boxes and ration cartons. ★Comes with two figures and four marking options.

Information is current as of March 9, 2020. Specifications are subject to change without notice.


1/48 Swiss Messerschmitt Bf109 E-3

Sunday, 15 March 2020 15:18 Published in Tamiya

Special Edition Static Model

1/48 Swiss Messerschmitt Bf109 E-3

Item No: 25200

★This special edition kit allows recreation of one of the Bf109 E-3 aircraft operated by Swiss forces during and after WWII. ★Includes markings to recreate the bright Swiss flag designs that were applied to stop them being mistaken for German Luftwaffe aircraft. ★Comes with two marking options in total. ★Features a full colour painting guide to assist in the creation of your masterpiece, plus a dedicated background story. ★Comes in a white package with printed color product label. ★Choose open or closed canopy when assembling. ★Includes a pilot figure to add an extra level of detail to your model

Information is current as of March 4, 2020. Specifications are subject to change without notice.

Masterwork Series No.xxx

1/48 Mitsubishi A6M3a Zero Fighter 188, 582nd Air Group
(Finished Model)

Item No: 21098

★This is a factory finished 1/48 scale plastic model depicting the 188 Zero fighter flown by the 582nd Air Group out of Rabaul in WWII. ★The marking scheme is unique to this product and does not feature in any Tamiya assembly kit of the aircraft. ★Features metal pitot tubes and realistic depictions of weathering for an expert finish.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

Toyota Celica Supra Long Beach GP Marshal Car

Sunday, 15 March 2020 15:14 Published in Tamiya

1/24 Sports Car Series No.33

Toyota Celica Supra Long Beach GP Marshal Car

Item No: 24033

Enjoying the Limelight
1970 was the year that the world was first greeted with Toyota's legendary Celica, and the car continued to innovate and impress through the domestic market's top spec Celica XX in 1978 and then the second generation Celica XX 2800GT (known as Celica Supra outside of Japan) from 1981. Sporting a 2.8-liter DOHC 6-cylinder engine and fitted with jazzy overfenders and roof spoiler in some export versions, the car was a frequent sight at racetracks; it was employed as the marshal car for the Toyota Grand Prix of Long Beach in 1982, complete with a BAE turbocharger and boosted output of 230hp that doubtless won the car even more admirers over the race weekend.

About the Model
★This is a 1/24 scale plastic model assembly kit. Length: 195mm, width: 81mm, height: 67mm. ★The wedge shaped form of the car is captured in style, with separate parts for overfenders, roof spoiler and other details. ★Clear and plated parts are used in the depiction of the light bar. ★Move the retractable headlights via a simple one-touch mechanism. ★Underside offers excellent detail with depictions of suspension, exhaust and more. ★Features a realistic interior with easy to assemble parts breakdown. ★Wheels are metal-plated. Front wheels are steered. ★Comes with a driver figure to up the realism.

Information is current as of March 4, 2020. Specifications are subject to change without notice.

Page 2 of 4

Social sharing

Who's Online

We have 147 guests online