TQ R/C & Hobbies

Electric R/C Car Series No.524

Stadium Thunder (2012)

Item No：58524

【 Bring the Thunder 】 This is a re-release version of the Stadium Thunder R/C pick-up truck assembly kit, which was inspired by the popular stadium racing truck designs seen in the United States. The polycarbonate body realistically captures the ground-hugging form of the truck and its livery can be easily depicted with the included stickers. The model also features fluorescent yellow wheels to provide an eye-catching accent.

【 Tough RWD Off-Road Chassis 】 The lightweight ABS bathtub chassis is easy to assemble and features a rear-mounted motor, rear-wheel drive layout. Power is delivered via a fully-enclosed gearbox which is equipped with a differential. The 4-wheel independent double wishbone suspension is equipped with C.V.A. shock units and extremely durable monocoque lower arms. Large diameter tires provide dynamic off-road handling. The front spiked tires feature three ribs for enhanced stability while the rear tires feature both spikes and an X-shaped tread pattern along the center to ensure high grip.

【 Specifications 】 ●Length: 420mm　●Width: 295mm　●Height: 170mm　●Wheelbase: 260mm　●Tread: 248mm (Front), 242mm (Rear)　●Tire Width/Diameter: 45/98mm (Front), 52/99mm (Rear) ●ABS Bathtub Type Chassis Frame
●Polycarbonate Body　●Rear-Mounted Motor, Rear-Wheel Drive　●3-Bevel Differential Gear　●F/R Double Wishbone Suspension　●F/R CVA Oil Dampers　●Gear Ratio = 1:10.00 ●Requires an Electronic Speed Controller (sold separately)　●Type 540 Motor

【 Separately Required Items 】 ●2-channel R/C unit with ESC　●Battery Pack & Charger ●Batteries for transmitter

The information on this page is current as of April 20, 2012.

1/10 Expert Built Series No.129

XB MINI JCW Coupe (M-05)

Item No：57829

【 A MINI with An Attitude 】 This is a ready-to-run R/C model of the MINI JCW Coupe race car which entered in the SP 3T class at the 39th ADAC Zurich 24 Hours Nurburgring in 2011. The stylish and sporty form of the MINI Coupe has been accurately reproduced by the polycarbonate body which is finished with a distinctive racing livery. Polycarbonate rear wing and light cases as well as injection-molded side mirrors enhance the model's realistic looks.

【 R/C Units, Battery Pack, and Charger 】 R/C units are installed onto the pre-assembled chassis and a wheel-trigger type transmitter, battery pack & charger are included to allow you to enjoy R/C driving instantly. The FM transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation. (*Battery pack and charger are included for Japan market only.)

【 Low Center of Gravity M-05 Chassis 】 The front-wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-to-assemble semi-monocoque frame. Gearbox, motor, battery pack, receiver, servo, and ESC are positioned for optimum weight distribution and a low center of gravity. A ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provides stable high-speed cornering. In addition, M-Chassis radial tires with realistic tread patterns are mounted on 8-spoke wheels.

【 Specifications 】 ●Length: 375mm, Width: 170mm, Height: 128mm　●Wheelbase: 239mm　●Trear (F/R): 138mm　●Front-Mounted Motor, Front-Wheel Drive　●3-Bevel Differential Gears　●3-Piece Steering Tie-Rod　●Front & Rear Double Wishbone Suspension　●Front & Rear Friction Dampers　●Gear Ratio = 5.8:1　●Tire Width/Diameter: 25/59mm　●Electronic Speed Controller (Forward/Reverse Type)

Specifications are subject to change without notice.

【 New Item 】

1/35 Scale Limited Edition

German Steyr 1500A Kommandeurwagen HQ Staff Set (w/7 Figures)

Item No：25149

★This 1/35 scale model of the Kommandeurwagen, which was used as a staff car to transport high-ranking officers and commanders, comes with 7 figures, including generals and a female aide. ★Kit enables instant diorama creation straight from the box. ★You can choose to assemble the roof, trunk lid, and all four doors in either open or closed positions. ★3 marking options included. ※4 figures are products of ICM (a general officer, an adjutant, a female aide, and a common soldier).

The information on this page is current as of March 12, 2012.

1/48 Military Miniature Series No.71

Russian Heavy Tank JS-2 Model 1944 ChKZ

Item No：32571

【 Realistic Presence Comes on Your Palm 】 The Russian Heavy Tank JS-2 was built to counter the German Tiger I. The JS-2, which was put into production in December 1943 during the latter half of WWII, had a long powerful 122mm gun and superior armor. From August, 1944 the hatch on the front glacis was deleted, which greatly improved its frontal protection. The JS-2 was produced in the Chelyabinsk Kirov factory (ChKZ), and they proved to be effective as "breakthrough" tanks as well as combating German armor.

【 About the Model 】 ★1/48 scale plastic assembly kit. Length: 206mm. ★Turret and hull feature a realistic cast metal surface texture. ★Metal chassis weight enhance the sense of mass. ★The assembly-type tracks offer easy assembly and feature realistic sag effect. ★Comes with 1 commander figure and 4 marking options.

Specifications are subject to change without notice.

【 New Item 】

Racing Mini 4WD Series No.70

Dash-01 Super Emperor Premium (Super-II Chassis)

Item No：18070

★The Mini 4WD Super Emperor is being offered as a premium model on the modern Super-II chassis. ★Comes with Red large-diameter 6-spoke wheels and Black large-diameter slick tires. ★The A Parts and Easy Locking Gear Cover are molded in Orange ABS plastic. ★Newly designed sticker sheet included.

The information on this page is current as of March 12, 2012.