TQ R/C & Hobbies

1/10 Expert Built Series No.194

XB Honda City Turbo (WR-02C Chassis)

Item No: 57894

A Funky Blast from the Past!
This factory finished R/C model is a comical recreation of a racing version of Honda's 1983 release in Japan - the City Turbo. The tough resin body features crisp molding, and the kit includes a driver figure with helmet to add further mirth to proceedings - both body and driver are painted, and have colorful decorative stickers pre-applied. The WR-02C chassis runs on tires with left-right asymmetric tread patterns.

WR-02C Chassis - Wheelie Fun!
The 185mm wheelbase WR-02C chassis utilizes a sturdy monocoque frame which encompasses and protects the gearbox, enhanced by side members. The gear differential unit housed inside the sealed gearbox receives its power from the center-mounted motor, and passes it on to the rear wheels. A longitudinal position for the battery pack contributes to the model's optimal weight distribution to ensure that when the City Turbo accelerates in a hurry, it performs a dynamic and thrilling wheelie, cushioned by the wheelie roller bar to ensure that the car doesn't topple over. The steering servo is positioned along the centerline of the chassis, using a 2 tie-rod setup for straightforward handling.

2.4GHz Transmitter Included
In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only. Transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation.

Specifications
●Length: 345mm、Width: 210mm、Height: 165mm　●Wheelbase: 185mm ●Tread: 165mm (Front), 170mm (Rear)　●Tire Width/Diameter: 35/70mm (Front), 42/70mm (Rear)　●Resin Monocoque Frame ●Rear-Wheel 2WD ●4-Wheel Double Wishbone Suspension　●Front/Rear Friction Dampers　●2-Piece Steering Tie Rod　●3-Bevel Differentials ●Gear Ratio: 16.5:1　●Torque-Tuned Motor ●Electronic speed controller (forward/reverse type)

Separately Required Items
●R6/AA/UM3 batteries for transmitter

Information is correct as of March 17, 2016. Specifications are subject to change without notice.

1/10 Expert Built Series No.195

XB Racing Fighter (DT-03 Chassis)

Item No: 57895

★The stylish Racing Fighter also joins the Expert Built series of factory finished models! ★The durable polycarbonate body comes pre-painted with racy markings already applied. ★The DT-03 is a long-wheelbase monocoque type chassis that offers superb stability and uncomplicated assembly.

Information is correct as of March 3, 2016. Specifications are subject to change without notice.

1/35 Military Miniature Series No.348

Russian Self-Propelled Gun SU-76M

Item No: 35348

In the Nick of Time
The SU-76M filled an important and particularly pressing Soviet need for an effective self-propelled gun against invading German forces after the start of Operation Barbarossa in WWII. Based upon the T-70 light tank chassis, it was production-friendly and some 11,000 were manufactured between 1943 and 1945. Its 76.2mm ZiS-3 gun helped it to play a valuable part offering supporting fire and as an anti-tank weapon. Superior mobility was its calling card, and the SU-76M was also able to operate in close unison with infantry units.

About the Model
★This is a 1/35 scale plastic model assembly kit of the Russian self-propelled gun SU-76M. ★ Length: 146mm, width: 78mm. ★Exhaustive surveys of a real SU-76M ensure the model accurately captures the open-top self-propelled gun form. ★76.2mm gun parts breakdown and attachment was inspired by the real vehicle. Poly caps allow movement. ★Realistic assembly type tracks feature one-piece straight sections and jig for construction. ★Contains three figures in authentic pose, and comes with two marking options.

Information is correct as of March 28, 2016. Specifications are subject to change without notice.

1/35 Military Miniature Series No.349

French Light Tank AMX-13

Item No: 35349

★This plastic model assembly kit recreates the AMX-13, a light tank operated by French forces post-WWII. It was designed as a lightweight vehicle that could be airlifted with little trouble, an important feature given the signs of discontent in the French colonies. ★Tamiya designers closely measured and studied real AMX-13s in the making of this model, leading to a highly accurate depiction of the tank's oscillating turret and overall form. ★The canvas cover is also artfully captured in resin. ★Comes with a commander torso figure and 2 marking options. ★Includes realistic belt-type tracks, plus photo-etched engine grille part.

Information is correct as of March 3, 2016. Specifications are subject to change without notice.

Tamiya-Italeri Series No.22

1/35 German Bundeswehr Self-Propelled Howitzer M109A3G

Item No: 37022

★This 1/35 scale plastic model assembly kit recreates the German Bundeswehr's M109A3G. Italeri's original M109 kit is joined by A3G-specific parts, such as the long-caliber gun, Bundeswehr-type tracks, smoke dischargers and hull rear storage baskets. ★Turret panoramic sight and drive sprocket parts have been updated for an even more impressive finish. ★The kit includes 2 figures and 2 marking options. ★Belt-type tracks can be painted and cemented.
★Vehicle parts are a product of Italeri.

Information is correct as of March 3, 2016. Specifications are subject to change without notice.

Mini 4WD Product

HG Carbon Rear Multi Roller Setting Stay (1.5mm)

Item No: 95260

★This carbon plate not only provides superior rigidity compared to FRP counterparts, it also gives your car that quintessential racy look. ★Holes allow attachment of 9mm, 13mm, or 19mm rollers in wide setups. ★Warning: do not use cleaners on this part, as they may damaged printed surfaces.

Compatible with: MA, MS, AR, VS, Super-II/X/XX/TZ-X Chassis cars (some chassis/bodies may require modification)

Information is correct as of March 3, 2016. Specifications are subject to change without notice.

Mini 4WD Product

Astro-Boomerang Clear Red Special (Super-1 Chassis)

Item No: 95274

Clearly a Winning Color Scheme!
This Mini 4WD model assembly kit creates a special color version of the Astro-Boomerang, a machine which appeared in the classic Japanese Mini 4WD comic "Dash Boy Ten" as the trusty steed of main character Tenka Taihei. The classic body has an extremely low profile and uses uniquely-styled wings (the front is laid upon the bumper), as well as an opened up rear section to allow motor cooling - here, it is specially molded in a dazzling clear red. Also included are clear stickers especially for this model, plus a 48mm mini version of the car.

Small But Perfectly Formed - the Super-1 Chassis
The Super-1 chassis has a low center of gravity and superb cornering thanks to its relatively short 80mm wheelbase. On the Astro-Boomerang Clear Red Special, it is molded in a pristine white, with A parts (including gear cover), removable side guards, and rollers. In keeping with the color scheme, lightweight white large-diameter narrow wheels are fitted with hard red arched tires. The model features a 4:1 gear ratio and includes a motor to run the diminutive yet speedy Super-1.

Specifications
★Length: 134mm ★Width: 90mm ★Height: 39mm ★Includes motor ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is correct as of March 18, 2016. Specifications are subject to change without notice.