Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:
Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:
https://forms.gle/ZqUybUaVissSRpbb8
Registration fee: IDR 300,000 per racer, eligible for 20 run
Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country. For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.
Regulation:
1. Race system is bracket system 4-2-1
Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined
2. All parts MUST BE Tamiya original parts.
3. Racer can use their own rechargeable batteries
4. Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5. Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.
Other things to note:
1. Please note that all racers should bear their own tickets and accomodation to Jakarta.
2. Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.
Hop-Up Options no.1988
Silicone Diff. Oil #300000
Item No: 54988
★This silicone oil has high viscosity which is suitable for differential gears, and will give your drive superior stability. ★Comes in a plastic bottle. Contents: 30ml. ★Oil color: yellow.
Information is current as of March 2, 2021. Specifications are subject to change without notice.
Hop-Up Options no.1989
CC-02 A Parts (Gearbox) (Matte Plated)
Item No: 54989
★These glass fiber-reinforced nylon resin A parts are matte plated on both sides, and mimic the look of the transmission case of a real car.
Compatible Chassis
CC-02 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.
Information is current as of March 2, 2021. Specifications are subject to change without notice.
Hop-Up Options no.1990
CC-02 B Parts (Axle Housing) (Matte Plated)
Item No: 54990
★These are CC-02 B Parts, molded in tough glass fiber-reinforced plastic with a matte plated finish that mimics the look of the axle housings on a real car.
Compatible Chassis
CC-02 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.
Information is current as of March 2, 2021. Specifications are subject to change without notice.
Hop-Up Options no.1996
M-Chassis Lightweight One-Piece Aluminum Axle & Hub Set
Item No: 54996
★These one-piece aluminum axle and hub parts are crafted in duralumin and given a hard anodized finish. ★Each is around half the weight of kit-standard 5mm aluminum hex hub and axle, to lighten the load on the spring bottom. ★Replace spacers to change axle tread.
Compatible Chassis
M-05, M-05 PRO, M-05Ra, M-05 Ver.II PRO, M-06, M-06 PRO, M-07 Concept & M-08 Concept Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.
Information is current as of March 2, 2021. Specifications are subject to change without notice.
Hop-Up Options no.1997
Hornet Full Ball Bearing Set
Item No: 54997
★Ball bearings are a great first tuning step, for minimal drive loss, longer drive times, and high durability. ★This set includes the right amount to kit out that Tamiya legend The Hornet. ★Contains one 850 and nine 1150 ball bearings. ★The image at right shows the ball bearings and the components they replace.
Compatible Chassis
CW-01 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.
Information is current as of March 2, 2021. Specifications are subject to change without notice.
We have 421 guests online