TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

1/10 R/C Subaru Brat Blue Version

Saturday, 03 August 2019 14:55 Published in Tamiya

Special Edition R/C Product

1/10 R/C Subaru Brat Blue Version

Item No: 47413

Blue Version
The Subaru Brat was made solely for export, and achieved tremendous popularity in the U.S. market in the 1970s. Tamiya first produced an R/C version of this popular little truck back in 1983, and then an updated, improved re-release in 2007. Now the Brat appears as a special Blue Version of the latter, with the detail-packed body parts molded in blue plastic. This assembly kit also comes with a driver figure for a nostalgic feel, plus a lightweight and durable polycarbonate body.

2WD Chassis Packed with Unique Features
The unique space frame chassis is specially molded in dark gray. It features a 4-wheel independent suspension setup with front double wishbones and rear trailing arms. The rear suspension in particular was updated in 2007 with diaphragm type oil dampers and coil springs. A Type 540 motor drives the differential-equipped gearbox, and covered drive shafts feature dog bone joints for optimum transmission efficiency. Block pattern tires mounted on realistic black 8-spoke wheels round out this stylish package.

Specifications
★Length: 453mm, Width: 220mm, Height: 175mm ★Tread: 197mm (Front), 178mm (Rear) ★Tire Width/Diameter: 35/82mm (Front & Rear) ★Space Frame ★Rear-Wheel Drive ★3-Bevel Differential ★2-Piece Steering Tie-Rod ★Suspension: Front Double Wishbone (inboard springs), Rear Trailing Arm (oil dampers) ★Gear Ratio = 6.7:1, 7.3:1 or 8.5:1 ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is correct as of August 2, 2019. Specifications are subject to change without notice.

1/10 R/C Citroën 2CV Rally (M-05Ra)

Saturday, 03 August 2019 14:52 Published in Tamiya

Electric R/C Car Series No.670

1/10 R/C Citroën 2CV Rally (M-05Ra)

Item No: 58670

Rally Battler
The 2CV is a true legend in the motoring world, with many versions released in its 40-plus years manufacturing run. It was not only popular with the motoring public, but could be seen battling in various motorsport genres, in particular rallying. This is an R/C model assembly kit recreating such a rallying 2CV, with the much-loved and unmistakeable 2CV form captured in lightweight polycarbonate. Separately molded plastic parts are included to depict fog lamps, bumper with light guards, rooftop recovery ladder and more. Stickers are supplied in the kit to give your rally car a full set of sponsor logos and markings for even more realism.

Rally Ready M05Ra Chassis
Based on the front wheel drive M-05, the rally-tuned M-05Ra chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. The 4-wheel independent double wishbone suspension is equipped with specially designed hub carriers and uprights to increase ground clearance by 5mm. Front skid guard, side guards, and rally block tires are also included to allow you to enjoy both gravel and tarmac driving.

Specifications
★Length: 394mm, Width: 181mm, Height: 165mm (does not include ladder) ★Wheelbase: 239mm  ★Tread: 138mm (Front & Rear) ★Tire Width/Diameter: 26/60mm (Front & Rear) ★Monocoque Chassis ★Front-Midship Motor, Front-Wheel Drive ★3-Bevel Differential ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Friction Dampers ★Gear Ratio = 7.25:1 ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is correct as of August 2, 2019. Specifications are subject to change without notice.

3x6mm Steel Hex Head Screws

Saturday, 03 August 2019 14:50 Published in Tamiya

Spare Parts no.1624

3x6mm Steel Hex Head Screws

Item No: 51624

★These are durable steel screws with hex heads for secure tightening. ★Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of July 2, 2019. Specifications are subject to change without notice.

3x6mm Steel Countersunk Hex Head Screws

Saturday, 03 August 2019 14:47 Published in Tamiya

Spare Parts no.1625

3x6mm Steel Countersunk Hex Head Screws

Item No: 51625

★These are durable steel countersunk screws with hex heads for secure tightening. ★Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of July 2, 2019. Specifications are subject to change without notice.


3x8mm Steel Hex Head Screws

Saturday, 03 August 2019 14:45 Published in Tamiya

Spare Parts no.1626

3x8mm Steel Hex Head Screws

Item No: 51626

★These are durable steel screws with hex heads for secure tightening. ★Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of July 2, 2019. Specifications are subject to change without notice.

3x8mm Steel Countersunk Hex Head Screws

Saturday, 03 August 2019 14:44 Published in Tamiya

Spare Parts no.627

3x8mm Steel Countersunk Hex Head Screws

Item No: 51627

★These are durable steel countersunk screws with hex heads for secure tightening. ★Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of July 2, 2019. Specifications are subject to change without notice.

3x10mm Steel Hex Head Screws

Saturday, 03 August 2019 14:42 Published in Tamiya

Spare Parts no.1628

3x10mm Steel Hex Head Screws

Item No: 51628

★These are durable steel screws with hex heads for secure tightening. ★Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of July 2, 2019. Specifications are subject to change without notice.

3x10mm Steel Countersunk Hex Head Screws

Saturday, 03 August 2019 14:40 Published in Tamiya

Spare Parts no.1629

3x10mm Steel Countersunk Hex Head Screws

Item No: 51629

★These are durable steel countersunk screws with hex heads for secure tightening. ★Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of July 2, 2019. Specifications are subject to change without notice.

3x12mm Steel Hex Head Screws

Saturday, 03 August 2019 14:39 Published in Tamiya

Spare Parts no.1630

3x12mm Steel Hex Head Screws

Item No: 51630

★These are durable steel screws with hex heads for secure tightening. ★Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of July 2, 2019. Specifications are subject to change without notice.

3x12mm Steel Countersunk Hex Head Screws

Saturday, 03 August 2019 14:33 Published in Tamiya

Spare Parts no.1631

3x12mm Steel Countersunk Hex Head Screws

Item No: 51631

★These are durable steel countersunk screws with hex heads for secure tightening. ★Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of July 2, 2019. Specifications are subject to change without notice.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  Next 
  •  End 
  • »
Page 1 of 3

Social sharing

Who's Online

We have 150 guests online