TQ R/C & Hobbies

Electric R/C Car Series no.703

1/10 R/C au TOM’S GR Supra (TT-02)

Item No: 58703

★Meet our new 1/10 R/C model assembly kit of the au TOM'S GR Supra which sealed a thrilling comeback championship in the final race of the 2021 Super GT season. ★A polycarbonate body captures the car's form in style, with separate polycarbonate light cases and canards. Side mirrors and rear wing are molded in ABS plastic. ★The model is based upon the accessible and eminently-tunable TT-02 chassis.

Information is current as of July 6, 2022. Specifications are subject to change without notice.

Hop-Up Options no.2051

XV-02 Setting Spring Set

Item No: 22051

★This set contains two each of soft (black), medium (gold, kit-standard) and hard (silver) springs. ★Use them to fine-tune your damper setup. ★Free length: 40mm.

Compatible Chassis
XV-02 PRO Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of July 6, 2022. Specifications are subject to change without notice.

Hop-Up Options no.2052

XV-02 Universal Propeller Shaft

Item No: 22052

★This universal shaft will not only boost drivetrain efficiency, it will also make maintenance more simple. ★A classy blue anodized finish will add a further touch of style to your car. ★Includes aluminum propeller shaft, input shaft, cross joint and urethane bushings. ★Please note that two of this product are required to fully kit out the chassis.

Compatible Chassis
XV-02 PRO Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of July 6, 2022. Specifications are subject to change without notice.

Hop-Up Options no.2053

XV-02 Aluminum Spur Gear Holder

Item No: 22053

★This lightweight aluminum component can be used in place of kit-standard T4 part, bringing about more efficient drive and true gear rotation via precision marriage of center shaft and spur gear. ★Component has a stylish blue anodized finish.

Compatible Chassis
XV-02 Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of July 6, 2022. Specifications are subject to change without notice.

Hop-Up Options no.2054

37mm Drive Shafts for Double Cardan Joint Shafts (2pcs.)

Item No: 22054

★These drive shafts are for use in double cardan joint shafts, which allow efficient rotation even when your car's axle or drive shaft are at an angle and improve suspension performance. ★On the XV-02 PRO chassis, use with separately sold Items 42218, 42219, 42220, and 42221.

Compatible Chassis
XV-02 PRO Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of July 6, 2022. Specifications are subject to change without notice.

Hop-Up Options no.2061

TD4/TD2 Carbon Damper Stay (Rear)

Item No: 22061

★This lightweight, rigid 3.5mm carbon fiber damper stay raises damper attachment position by 2mm compared to the kit standard part, for less bottoming-out of dampers. ★Stays are included to attach a rear wing in a more downforce-oriented position.

Compatible Chassis
TD2 & TD4 Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of July 6, 2022. Specifications are subject to change without notice.

1/12 Big Scale Racing Car Series No.36

Tyrrell P34 Six Wheeler (w/Photo-Etched Parts)

Item No: 12036

A Revolutionary Presence
Announced on September 22, 1975, the Tyrrell P34 caused a sensation - little wonder when one considers that it was the first six-wheeled Formula One car! Its layout employed 4 front wheels in an effort to reduce air drag while simultaneously improving the car's braking and steering. Following a number of test sessions and associated updates to the design, the P34 debuted in the hands of Patrick Depailler in the Spanish GP of May 1976. Things really took off a month later at the Swedish GP when Jody Scheckter led home Depailler in a marvellous 1-2 finish for the P34, demonstrating the potential that the car had, underlined by Tyrrell's 3rd place finish in that year's Constructors' standings

About the Model
★This is a 1/12 scale plastic model assembly kit. Length: 336mm, width: 168mm, height: 84mm. ★Moving depictions of complex front and rear suspensions employ coil springs. ★Steering wheel moves the front wheels via a realistic rack and pinion system. ★The engine is realistically rendered with an array of pipes, cords and lines. ★Features aluminum air funnels. ★Front, side and cockpit cowl parts are removable, allowing inspection of the detail underneath. ★A superbly detailed finish is provided by photo-etched parts depicting brake discs, radiator parts, nose wing endplates, seatbelt parts, and more! ★Main decals are a product of Cartograf. Markings are included to recreate car numbers 3 or 4. ★Semi-pneumatic synthetic rubber tires give a realistic finish.

★Useful tools and materials in the construction of your model
Item 74066 Diamond File (for Photo-Etched Parts)
Item 74068 Modeling Scissors (for Photo-Etched Parts)

★Precision cementing
Item 87091 Tamiya CA Cement (Gel Type)
Item 87188 Tamiya Multipurpose Cement (Clear)

★For a professional finish on metal parts
Item 87061 Tamiya Metal Primer
Item 87204 Metal Primer (40ml Bottle)

★Present your model as it deserves to be displayed
Item 73009 Display Case G

Information is current as of May 17, 2022. Specifications are subject to change without notice.

1/20 Grand Prix Collection No.58

Tyrrell P34 Six Wheeler 1976 Japan GP (w/Photo-Etched Parts)

Item No: 20058

The Only 6-Wheeled F1 Machine
The Tyrrell P34 is the only 6-wheeled machine in F1 history. It took part in actual races in 1976, and drivers Scheckter and Depailler went on to drive their cars to a 1-2 finish at the Swedish GP to prove its incredible potential. At the final race of the season, the P34 appeared before Japanese fans at the inaugural Japanese GP held at Fuji Speedway. From his 13th place qualifying position, Depailler overtook the field to briefly lead before a tire puncture dropped him back to finish the race in second place behind the Lotus of Andretti.

About the Model
★This is a 1/20 scale plastic assembly kit model. Length: 201mm, width: 100mm. ★The distinctive form of the car with four front and two rear wheels has been faithfully reproduced. ★The highly detailed engine features depictions of ignition cables. ★Unique front suspension has been accurately rendered. ★Main decals are high-quality Cartograf product. Markings are included to depict both No.3 and No.4 cars and sponsor markings. Also includes markings for team and driver names written in Japanese, which were specific to the Japan GP. ★Photo-etched parts are included to depict details such as brake discs, triangular net guard on the air funnels, rear wing stays, large rear wing panel, and seatbelt buckles.

★Useful tools and materials in the construction of your model
Item 74066 Diamond File (for Photo-Etched Parts)
Item 74068 Modeling Scissors (for Photo-Etched Parts)

★Precision cementing
Item 87091 Tamiya CA Cement (Gel Type)
Item 87188 Tamiya Multipurpose Cement (Clear)

★For a professional finish on metal parts
Item 87061 Tamiya Metal Primer
Item 87204 Metal Primer (40ml Bottle)

Information is correct as of June 1, 2022. Specifications are subject to change without notice.

Masterwork Series no.174

1/24 Nissan Fairlady 240ZG (Finished Model)

★The classic Fairlady 240ZG is depicted in its iconic Grand Prix Maroon scheme. ★The model features an opening hood that allows inspection of the detailed depiction of the inline-six engine beneath. ★Plated window frame and headlamp cover rims make for a fine, realistic finish.

Information is current as of July 6, 2022. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

HG Carbon Front Stay For Fully Cowled Mini 4WD (1.5mm) J-Cup 2022

Item No: 95153

★This lightweight, 1.5mm thickness carbon fiber stay has holes for attachment of 9mm, 13mm or 19mm rollers in a wide position. ★The carbon fiber pattern will add some style to your car, as will the blue-green printed detailing including Tamiya and J-Cup logos. ★A plethora of holes ensures numerous setup options are at your disposal.

Compatible Cars
Mini 4WD & Mini 4WD PRO cars
*Please note that some chassis/bodies (not Fully Cowled Mini 4WD) may require modification.

Information is current as of April 19, 2022. Specifications are subject to change without notice.