TQ R/C & Hobbies

【 New Item 】

Educational Construction Series No.195

Wall-Hugging Ladybug

Item No：70195

Length=140mm　Image shows finished model.

★The Wall-Hugging Ladybug will automatically move along the floor. When the sensor rod makes contact with a wall, it will automatically change direction and move forward hugging the wall. ★Clear red body allows you to see the internal mechanisms. ★Motor and switch comes conveniently pre-connected. Snap-on easy assembly. ★Requires one R6/AA/UM3 battery (sold separately).

Information and specifications coming soon.

Tamiya Airbrush System No.40

Spray-Work HG Trigger-Type Airbrush (w/Integrated Cup)

Item No：74540

【 Handy for Various Paint Jobs 】 This trigger type airbrush features a durable metal body with an integrated cup which holds 7cc of paints. The nozzle diameter is 0.3mm which enables you to spray lines under 1mm width as well as painting large areas. Double action allows you to make fine adjustment to the volume of spray.

Specifications are subject to change without notice.

【 New Item 】

Grade-Up Parts No.420

Neochamp Mini 4WD Ni-MH Battery (2pcs.)

Item No：15420

These rechargeable Ni-MH batteries are lightweight (19g each) and can be recharged approximately 2,000 times. Minimal self-discharging enables long-lasting battery life. ※Battery life period may change according to usage conditions.

Information and specifications coming soon.

【 New Item 】

Grade-Up Parts No.419

Neochamp Mini 4WD Ni-MH Battery & AC Quick Charger Set

Item No：15419

★This set includes Ni-MH batteries for Mini 4WD cars and a quick charger. ★The compact charger allows to quickly and safely recharge your Ni-MH batteries using a household power outlet in approximately 2 hours.

Information and specifications coming soon.

【 New Item 】

Craft Tool Series No.98

Modeler's Knife PRO

Item No：74098

★This professional knife is ideal for precision tasks. ★Set includes Straight blade (3pcs.), Curved blade (2pcs.), and Chisel blade (2pcs.). ★Metal chuck enables secure blade attachment.

Information and specifications coming soon.

【 New Item 】

Grade-Up Parts No.421

Gold Plated Terminal Set (for Super-II Chassis)

Item No：15421

★Gold plated terminal connectors are rust-resistant and highly conductive of electricity. ★These terminals stand up well to the rigors of racing, and will improve efficiency of battery power transmission for stable and reliable Mini 4WD running.

Information and specifications coming soon.

【 New Item 】

Craft Tool Series No.97

Fine Craft Saws II (for Scribing)

Item No：74097

★This set of thin craft saws is made from photo-etched metal and can be used for applying panel lines. ★The blades feature grips which can be folded over to increase support.

Information and specifications coming soon.

Tamiya R/C System Series No.45

EXPEC GT-I 2.4G RADIO CONTROL SYSTEM (BASIC SET)

Item No：45045

【 No Frequency Crystals Required 】 This 3-channel radio control system utilizes a 2.4GHz frequency hopping system which eliminates the need for frequency crystals. Designed by world-famous German industrial designer Hans A. Muth, the wheel/trigger type transmitter has a distinctive, ergonomic form.　The ideally placed steering wheel and trigger offer a user-friendly layout. This set does not include an ESC to allow you to use your desired ESC. Only four R6/AA/UM3 batteries (sold separately) are required for the transmitter, making it lighter and more energy efficient.
＜NOTE＞ESCs without BEC such as TEU-101BK and TEU-104BK are not compatible with the receiver.

【 Easy to Use Layout 】 The ideally placed steering wheel and trigger, centrally located servo reverse switch and throttle/steering trim dials; and convenient power switch, 3-channel button, and Throttle ATV/Steering Dual Rate trim dial positions combine to offer a user-friendly layout. Transmitter and receiver are factory paired and no setup is required.

【 Specifications 】 ●Transmitter: TRU-07, Frequency Range: 2.4GHz, Power Supply: 6V (R6/AA/UM3 Battery x4), Current Consumption: Less than 100mA, Antenna: Built-In　●Receiver: TRU-07, Frequency Range: 2.4GHz, Power Supply: 4.8～6V, Dimensions: 26×39×10mm (excluding protrusions), Weight: 8g　●Servo: TP-S3003 Power Supply: 4.8～6V (share with receiver), Current Consumption: 8mA (using 6V battery), Output Torque: 4.1kg-cm (using 6V battery), Operating Speed: 0.19sec/60° (using 6V battery), Dimensions: 40.4×19.8×36mm, Weight: 37.2g

【 About Hans A. Muth 】 A German industrial designer. After working at Ford of Europe and BMW as an automotive stylist, he became a freelance designer and gained attention for his design of the Suzuki Katana motorcycle in the 1980s. He was involved with product development projects as a design consultant for numerous companies around the world. His work has covered a wide variety of fields ranging from automotive and aerospace design to consumer electronics.

Specifications are subject to change without notice.

Tamiya R/C System Series No.46

EXPEC GT-I 2.4G RADIO CONTROL SYSTEM (BASIC SET + ESC)

Item No：45046

【 No Frequency Crystals Required 】 This 3-channel radio control system utilizes a 2.4GHz frequency hopping system which eliminates the need for frequency crystals. Designed by world-famous German industrial designer Hans A. Muth, the wheel/trigger type transmitter has a distinctive, ergonomic form.　The ideally placed steering wheel and trigger offer a user-friendly layout. This set includes a TEU-302BK ESC. Only four R6/AA/UM3 batteries (sold separately) are required for the transmitter, making it lighter and more energy efficient.

【 Easy to Use Layout 】 The ideally placed steering wheel and trigger, centrally located servo reverse switch and throttle/steering trim dials; and convenient power switch, 3-channel button, and Throttle ATV/Steering Dual Rate trim dial positions combine to offer a user-friendly layout. Transmitter and receiver are factory paired and no setup is required.

【 Specifications 】 ●Transmitter: TRU-07, Frequency Range: 2.4GHz, Power Supply: 6V (R6/AA/UM3 Battery x4), Current Consumption: Less than 100mA, Antenna: Built-In　●Receiver: TRU-07, Frequency Range: 2.4GHz, Power Supply: 4.8～6V, Dimensions: 26×39×10mm (excluding protrusions), Weight: 8g　●Servo: TP-S3003 Power Supply: 4.8～6V (share with receiver), Current Consumption: 8mA (using 6V battery), Output Torque: 4.1kg-cm (using 6V battery), Operating Speed: 0.19sec/60° (using 6V battery), Dimensions: 40.4×19.8×36mm, Weight: 37.2g　●ESC: TEU-302KB　Control System: High Frequency Wave Drive System, Max. Continuous Current (FET Spec): Forward 120A, Reverse 60A, Power Supply: 7.2～8.4V, Compatible Motor: Electric Motor for R/C cars (over 23 turns), Drive Frequency: 500Hz, 1kHz, 2kHz (with 3 steps), Output Voltage for Receiver： 6V (Input 7.2V), Dimensions: 33.5×27.2×14.3mm (excluding protrusions), Weight: 48g (body 43g)

【 About Hans A. Muth 】 A German industrial designer. After working at Ford of Europe and BMW as an automotive stylist, he became a freelance designer and gained attention for his design of the Suzuki Katana motorcycle in the 1980s. He was involved with product development projects as a design consultant for numerous companies around the world. His work has covered a wide variety of fields ranging from automotive and aerospace design to consumer electronics.

Specifications are subject to change without notice.

【 New Item 】

Display Goods

Display Turntable (Black)

Item No：89927

★This black colored Turntable allows you to leisurely view your finished model from various angles. ★The set includes mirror type and brick-wall patterned table sheets. High and Low selectable turntable speed. ★Table diameter: 20cm.

Specifications are subject to change without notice.