TQ R/C & Hobbies

1/48 Scale Limited Edition

North American P-51D Mustang "Tuskegee Airmen"

Item No：25147

【 The Red-Tail Angels 】

The "Tuskegee Airmen" was a famous USAAF unit which was made up of African-American pilots during WWII. They formed the 332nd Fighter Group and were firstly deployed to the Mediterranean in June 1943. In the following year, the 332nd FG was deployed to Italy to escort bombers to attack targets in Southern Germany and Eastern Europe. In November 1944, the unit was re-equipped with P-51Ds and in March 1945, they escorted B-17 bombers to Berlin. The unit protected the bombers on this mission as well and earned the trust of the bomber units.

【 About the Model 】

★1/48 scale plastic assembly kit of the P-51D Mustang. Length: 205mm, Wingspan: 236mm. ★The aircraft's elegant form is accurately reproduced. ★Cockpit and distinctive radiator have accurate details. ★3 marking options included. ★Canopy masking stickers also included. ★Comes with 1 seated pilot figure.

1/72 Scale Limited Edition

North American P-51D Mustang "Tuskegee Airmen"

Item No：25148

【 The Red-Tail Angels 】

The "Tuskegee Airmen" was a famous USAAF unit which was made up of African-American pilots during WWII. They formed the 332nd Fighter Group and were firstly deployed to the Mediterranean in June 1943. In the following year, the 332nd FG was deployed to Italy to escort bombers to attack targets in Southern Germany and Eastern Europe. In November 1944, the unit was re-equipped with P-51Ds and in March 1945, they escorted B-17 bombers to Berlin. The unit protected the bombers on this mission as well and earned the trust of the bomber units.

【 About the Model 】

★1/72 scale plastic assembly kit of the P-51D Mustang. Length: 136mm, Wingspan: 157mm. ★The aircraft's elegant form is accurately reproduced. ★3 marking options included. ★Canopy masking stickers also included.

1/48 Aircraft Series No.110

Mitsubishi G4M1 Model 11 - Admiral Yamamoto Transport (w/17 Figures)

Item No：61110

【 Battle Above Bougainville Island, April 18th, 1943 】

On the morning of April 18th, two G4M1 transports departed from the Rabaul Airbase to visit frontline units at Balalae, Buin. The first aircraft, No.323, had eleven people on board, including Admiral Isoroku Yamamoto. The second aircraft, No.326, had twelve people on board, including Vice Admiral Matome Ugaki. However, American forces knew of this trip thanks to code deciphering and ambushed the Mitsubishi G4M1 transports with a force of P-38 Lightning fighters. The loss of such a revered commander was at the same time a massive blow to Japanese forces and a morale boost for the Allies.

【 About the Mitsubishi G4M1 Model 11 】

The Mitsubishi G4M1 Model 11 was officially adapted in 1941 as the successor to the Type 96 bomber. Featuring a long flight range which enabled it to attack enemy fleets from land bases, it went on to serve as the IJN's main land-based bomber in the Solomon Islands in 1942. Most of the G4M1s during the Solomon Island campaign had their outer tail cones removed to provide a better field of fire for the tail-mounted 20mm cannon.

【 About the Model 】

★1/48 scale plastic assembly kit of the Mitsubishi G4M1 Model 11. Length: 416mm, Wingspan: 518mm. ★The tubular form of the G4M1 has been accurately reproduced. ★Realistically reproduced tail cone with outer section removed. ★Cockpit details, including instrument panel, gun sight, floor panel, and bulkhead, feature realistic details. ★Canopy above the left side pilot seat, dorsal turret, and the aircraft's flaps can be depicted in either up or down position. ★In addition to clear canopy parts, pre-painted canopy parts are also conveniently included. ★Kit contains a total of 17 figures: 1 depicting Admiral Yamamoto, 1 observer, 2 pilots, 1 gunner, and 12 mechanics. ★2 kinds of decals included to depict Admiral Yamamoto's and Vice Admiral Ugaki's transports respectively.

Limited Edition Scale Model

1/35 Russian Main Battle Tank T-55A

(w/Aber® Photo-Etched Parts & Metal Gun Barrel)

Item No：25145

【 About the T-55A 】

Production of the T-55 began in 1958 at a time of high tensions between the West and the Soviet Union. The tank was easy to produce and featured a compact hull and a dome-shaped turret equipped with a 100mm main gun. In the early 1960's, the T-55A with anti-radiation equipment was developed. T-55 and T-55A were also license built by Czechoslovakia and Poland and some received various improvements resulting in many sub-types. T-55 production continued until the late 70's and they equipped the armies of over 40 countries. They were used in various conflicts such as the Middle-East Wars and the Gulf War.

【 Photo-Etched Parts & Metal Barrel for Precision Details 】

This model comes with photo-etched parts and a metal gun barrel made by acclaimed Polish aftermarket parts manufacturer Aber®. The photo-etched parts include fine details such as engine grille, equipment fasteners, and commander's hatch area. The aluminum gun barrel provides the model with a heightened level of precision.

【 About the Model 】

1/35 scale T-55A plastic assembly kit model with photo-etched parts and metal gun barrel from Aber®. ★Length: 259mm. ★Accurately reproduces the tank's low-profile silhouette. ★In addition to the T-55A from Russian and Czechoslovak Armies, T-55 and T-55A equipped with a DShk-M machine gun from Russian and Polish Armies can also be reproduced. ★Engine grille, fuel drums, and complex road wheels have all been reproduced. ★Comes with a commander figure and 5 marking options.

Limited Edition Scale Model

1/35 Russian Heavy Tank JS-2 Model 1944 ChKZ

（w/Aber® Photo-Etched Parts & Metal Gun Barrel)

Item No：25146

【 About the JS-2 】

The Russian Heavy Tank JS-2 was built to counter the German Tiger I. The JS-2 was put into production in the latter half of WWII in December 1943 and was equipped with a powerful 122mm gun, maximum armor thickness of 120mm, and good mobility. From August 1944, the upper part of the glacis hatch was removed from the hull which greatly improved its defensive protection. The JS-2 was produced in the Chelyabinsk Kirov factory (ChKZ) and a characteristic of the tank was its one-piece rounded front hull. JS-2s were used to breakthrough defensive positions as well as in tank battles and contributed to the eventual Russian victory.

【 Photo-Etched Parts & Metal Barrel for Precision Details 】

This model comes with photo-etched parts and a metal gun barrel made by acclaimed Polish aftermarket parts manufacturer Aber®. The photo-etched parts include fine details such as engine grilles, production number on the cast turret, storage box, pistol port armor, and equipment fasteners. The aluminum gun barrel features a cast muzzle brake, providing the model with a heightened level of precision.

【 About the Model 】

1/35 scale JS-2 Model 1944 ChKZ plastic assembly kit model with photo-etched parts and metal gun barrel from AberR. Length: 282mm. ★Imposing form of the tank, including the large turret with 122mm gun, is faithfully reproduced. ★Turret and hull features a realistic cast metal surface texture. ★Both pre-assembled tracks and easy to assemble belt-type tracks are included. ★1 commander and 1 loader torso figures included. ★Comes with 4 kinds of markings to depict tanks from the Russian, Czechoslovak, and Polish armies.

The Advancing Mini Tank Series: add batteries and get ready to go!

The Advancing Mini Tank Series consists of motorized mini tanks that are pre-assembled, pre-painted and come with markings pre-applied. These models are powered by a powerful Type 130 motor and require two R6/AA/UM3 batteries. Thanks to rubber tracks, the advancing mini tanks can climb slopes of up to 40 degrees incline. The Advancing Mini Tank Series focuses on an entirely new dynamic...powerful, awesome, heavy-duty movement over rough terrain in what promises to be loads of fun. These models also replicate realistically every characteristic of the actual tanks. Try competing with friends for the ultimate Advancing Mini Tank Series experience!!!

Racing Mini 4WD Series No.65

Super Avante RS (Super-II Chassis)

Item No：18065

【 In Brilliant Color 】

This is an assembly kit of the popular race car-style Super Avante RS. The wedge-shaped aerodynamic body features distinctive, large rear wing and air intake slits to help enhance motor heat dissipation. Large diameter fluorescent orange slick tires are mounted on silver metal-plated wheels while stickers for the bold graphics on the body are also included.

【 Super-II Chassis 】

Super-II chassis offers superb durability and allows plenty of room for further customization. The chassis is molded in blue ABS plastic and is equipped with features such as a rotating switch, 2-point-secured rear stay, and easy-locking gear cover. By removing the motor cover, a separately available Motor Cooling Shield can be installed. In addition, multiple part attachment holes on the bumper and rear stay enable a wide range of setting options. It comes with a 4.2:1 gear ratio and a Type 130 motor.

【 Specifications 】

●Length: 150mm　●Width: 97mm　●Type 130 Motor Included　●Snap-On Easy Assembly

【 Separately Required Items 】

●2xR6/AA/UM3 batteries

Grade-Up Parts Series No.440

60mm Hollow Stainless Steel Shaft

Item No：15440

★While maintaining the same strength, these shafts are lighter than kit-standard components and enable improved acceleration.

★Compatible with Type 1, Type 3, Type 5, Super 1, FM. TZ, TZ-X, VS, and MS chassis machines.

Grade-Up Parts Series No.441

Brake Sponge Set (3 Types)

Item No：15441

★These brake parts help prevent the car from flying off the track from excessive speed during jumps. ★Set includes 3 types of brake sponge sheets, each offering a different amount of friction to enable customization of your machine to different track layouts.

Limited Edition Item

Mini 4WD Oval Home Circuit (Two-Level Lane Change)

Item No：94852

【 All-in-One Set Means Instant Fun! 】

This convenient set not only includes two Mini 4WD PRO assembly kits, but also a circuit to race them on, making it an excellent way to get your Mini 4WD racing career started. Easy-to-assemble 3-lane oval circuit features straights, curves, and the lane change sections. All you'll need are some alkaline batteries and you'll be ready to go.

【 Circuit Specifications 】

●Size of assembled circuit: 216×120cm　●2 laps around the circuit equals approximately 10 meters.　●Two-level lane change section features a transparent bridge cover.　●The track's plastic material helps reduce the noise level.

【 Separately required Items 】

●4xR6/AA/UM3 batteries for the 2 cars.