TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

1/10 R/C TRF420 Chassis Kit

Saturday, 30 November 2019 16:47 Published in Tamiya

TRF Series No.245

1/10 R/C TRF420 Chassis Kit

Item No: 42345

Pushing Back the Boundaries
This R/C model assembly kit creates the 2 belt-driven 4WD TRF420, the latest carbon fiber double-deck model in the thoroughbred line of TRF chassis. Race feedback was instrumental in its design, which features brand new arm and upright components, plus new suspension mounts which use plastic bushings for shafts that allow 5 different treads (and roll center settings). Motor position is now 1.5mm further forward and 1mm inside, further optimizing the chassis' balance as a whole, and parts in the updated steering bridge can be changed to tweak the steering setup. In the drivetrain, a lighter 37T gear differential design maintains the same oil capacity as predecessors, while new double cardan universal shafts bring stable corners and next-level speed. Body mounts now offer a choice between standard and 2mm forward body hole positions.

Featured Components
★Carbon fiber lower deck (2.25mm) ★Carbon fiber upper deck (2mm) ★Carbon fiber damper stays (3mm) ★Carbon fiber bumper support (2mm) ★Aluminum lower bulkheads ★Aluminum upper bulkheads ★Aluminum motor mounts (L/R) ★Aluminum servo support ★Center weight (52g) ★Front weights (5g, x2) ★Aluminum steering bridge ★Front direct coupling ★Rear gear differential ★TRF Super Short Big Bore Dampers ★Front & rear stabilizers

Specifications
★Length: 370mm ★Width: 187mm ★Wheelbase: 257mm ★Carbon Fiber Double Deck Frame (Upper: 2.25mm, Lower: 2mm) ★Transverse Motor ★2 Belt-Driven 4WD ★3-Piece Steering Tie-Rod ★Front Direct Drive ★Rear Gear Differential Unit ★4-Wheel Independent Double Wishbone Suspension ★TRF Super Short Big Bore Dampers

Separately Required Items
★Body ★Brushless Motor ★04 Module Pinion Gear ★Tires ★Wheels ★2-channel R/C system with ESC ★Batteries for transmitter ★Battery Pack and Charger

Information is current as of November 25, 2019. Specifications are subject to change without notice.

1/10 R/C Mercedes-Benz G 500 (CC-02)

Saturday, 30 November 2019 16:45 Published in Tamiya

Electric R/C Car Series No.675

1/10 R/C Mercedes-Benz G 500 (CC-02)

Item No: 58675

About the Model
★This model pairs a new body with a brand new chassis! ★The stylish, boxy form of the G 500 is captured realistically by a polycarbonate body. ★Separate plastic parts for front grille, side mirrors and spare tire cover give even more detail. ★The CC-02 chassis offers capable shaft-driven 4WD with sturdy 4-link rigid suspension front and rear.

Information is current as of November 7, 2019. Specifications are subject to change without notice.

1/14 R/C Truck Series No.61

Mercedes-Benz Arocs 3348 6x4 Tipper Truck
Red Cab & Silver Bed Edition

Item No: 56361

★Not got the time or facilities for a paint job? This truck model will be perfect for you, with a pre-painted red cab and silver bed, both with a topcoat also applied. ★The chassis uses metal parts extensively for a durable and realistic finish. ★Front-mounted motor powers dual rear axles. ★Features an assembly-type three speed transmission, with gear changes controllable via transmitter.

Information is current as of November 7, 2019. Specifications are subject to change without notice.

CC-02 Full Ball Bearing Set

Saturday, 30 November 2019 16:42 Published in Tamiya

Hop-Up Options no.1910

CC-02 Full Ball Bearing Set

Item No: 54910

★Ball bearings are an excellent first step when tuning your model, reducing loss in the drivetrain and raising durability of rotating parts. ★Contains two each of 850, 1260 and 1510 size, plus sixteen 1150 size ball bearings.

Compatible Chassis
CC-02 Chassis

Information is current as of November 7, 2019. Specifications are subject to change without notice.

1/24 Scale R/C Lunch Box Mini Clear Body Parts Set

Saturday, 30 November 2019 16:39 Published in Tamiya

Hop-Up Options no.1927

1/24 Scale R/C Lunch Box Mini
Clear Body Parts Set

Item No: 54927

★This is a clear polycarbonate version of the scaled-down Lunch Box Mini body. Paint it in whatever color scheme you desire! ★Requires C6 and C9 parts plus screws, magnets and snap pins from the separately sold assembly kit body. ★Marking stickers are included to decorate your car.

Compatible Chassis
SW-01 Chassis

Information is current as of November 7, 2019. Specifications are subject to change without notice.

TRF420 Suspension Arm Bushing B (2pcs.)

Saturday, 30 November 2019 16:38 Published in Tamiya

Hop-Up Options no.1942

TRF420 Suspension Arm Bushing B (2pcs.)

Item No: 54942

★These aluminum bushings are for use in the TRF420 design suspension, and they can be exchanged for easy setup of different damper positions. ★Parts have a stylish blue anodized finish. ★"B" design bushings are the same as those included in the TRF420 chassis kit.

Compatible Chassis
TA07 PRO*1, TA07 MS*1, TB Evo.6*1, TB Evo.6 MS*1, TB Evo.7*1, TB-05 PRO*1, TRF419*1, TRF419X*1, TRF419XR*1 & TRF420 Chassis

Information is current as of November 7, 2019. Specifications are subject to change without notice.

TRF420 Suspension Arm Bushing A-C (2pcs.)

Saturday, 30 November 2019 16:22 Published in Tamiya

Hop-Up Options no.1943

TRF420 Suspension Arm Bushing A-C (2pcs.)

Item No: 54943

★These aluminum bushings are for use in the TRF420 design suspension, and they can be exchanged for easy setup of different damper positions. ★Parts have a stylish blue anodized finish. ★"A-C" design bushings give a different offset to "B" bushings which are included as standard in the TRF420 chassis kit.

Compatible Chassis
TA07 PRO*1, TA07 MS*1, TB Evo.6*1, TB Evo.6 MS*1, TB Evo.7*1, TB-05 PRO*1, TRF419*1, TRF419X*1, TRF419XR*1 & TRF420 Chassis

Information is current as of November 7, 2019. Specifications are subject to change without notice.

TRF420 Wheel Axles (2pcs.)

Saturday, 30 November 2019 16:20 Published in Tamiya

TRF Series no.246

TRF420 Wheel Axles (2pcs.)

Item No: 42346

★These wheel axles were designed for the TRF420 chassis, and are approximately 1.5g lighter each than TRF417 design components in Item 51445. ★They can be used in clip or grub screw type shafts.

Compatible Chassis
TA07 PRO, TA07 MS, TB Evo.7, TB-05 PRO, TRF419, TRF419X, TRF419XR, TRF419X WS & TRF420 Chassis

Information is current as of November 7, 2019. Specifications are subject to change without notice.

TRF420 Carbon Upper Deck

Saturday, 30 November 2019 16:18 Published in Tamiya

TRF Series no.247

TRF420 Carbon Upper Deck

Item No: 42347

★This is the new TRF420 design upper deck, crafted in 2mm thickness carbon fiber material. ★Replace parts as they become worn or damaged to keep your chassis in tip-top condition.

Compatible Chassis
TRF420 Chassis

Information is current as of November 7, 2019. Specifications are subject to change without notice.

TRF420 Carbon Lower Deck

Saturday, 30 November 2019 16:16 Published in Tamiya

TRF Series no.248

TRF420 Carbon Lower Deck

Item No: 42348

★This is the TRF420 design upper deck, crafted in 2.25mm thickness carbon fiber material. ★Replace parts as they become worn or damaged to keep your chassis in tip-top condition.

Compatible Chassis
TRF420 Chassis

Information is current as of November 7, 2019. Specifications are subject to change without notice.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  4 
  •  5 
  •  Next 
  •  End 
  • »
Page 1 of 5

Social sharing

Who's Online

We have 904 guests online