TQ R/C & Hobbies

TRF Series no.269

840 Sealed Ball Bearings (2pcs.)

Item No: 42369

★Sealed ball bearings offer efficient rotation. ★Rubber seal helps keep dust and dirt out for greater longevity. ★Outer diameter: 8mm ★Inner diameter: 4mm ★Thickness: 3mm

Compatible Chassis
DB01, DB02, DN-01, FF-03. FF-03 PRO, FF-04 EVO, TA05, TA06, TA06 PRO, TA06 MS, TA07 PRO, TB-04, TB-04 PRO, TRF201, TRF201XMW, TRF211XM, TRF503, XV-01, XV-01T & XV-01 PRO Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of December 2, 2020. Specifications are subject to change without notice.

TRF Series no.270

630 Sealed Ball Bearings (2pcs.)

Item No: 42370

★Sealed ball bearings offer efficient rotation. ★Rubber seal helps keep dust and dirt out for greater longevity. ★Outer diameter: 6mm ★Inner diameter: 3mm ★Thickness: 2.5mm

Compatible Chassis
DN-01, DF-03, GF-01TR^*1, G6-01TR^*2, T3-01. SW-01, TA06, TA06 PRO, TA06 MS, TA07 PRO, TA07 MS, TB-04, TB-04 PRO, TC-01, TRF201, TRF201XMW, TRF211XM, TRF419, TRF419X, TRF419XR, TRF420, XV-01, XV-01T & XV-01 PRO Chassis
^*1: Requires sixteen.
^*2: Requires twenty-four.

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of December 2, 2020. Specifications are subject to change without notice.

Finishing Materials Series no.210

Accent Color (Dark Red-Brown)

Item No: 87210

★Give your military models some added realism with this handy red-tinged brown shade. ★Thinned to just the right consistency, it flows into crevasses on the subject, for realistic depiction of rust. ★The cap has a fine brush for precise application, rendering separate brushes and palettes unnecessary. ★Excess can be simply wiped away using a cotton bud with enamel thinner applied. ★Can be used on lacquer or acrylic base coats. ★Bottle contents: 40ml.

Information is current as of December 2, 2020. Specifications are subject to change without notice.

TRF Series no.264

1/10 R/C TA07 MSX Chassis Kit

Item No: 42364

Superlative Traction, Awesome Adaptability
This R/C chassis assembly kit refines the high performance single belt-driven 4WD TA07 MS even further! The included choice of 2.25mm thickness carbon fiber and 2mm thickness aluminum lower decks gives you great flexibility of setup, while the two-piece 2mm thickness vertical upper deck offers a sublime balance of pitch and roll flex, and two motor positions give you freedom of setup plus traction options. TRF420 suspension uses plastic mount bushings for fine adjustments, and the front and rear pulleys are also TRF420 designs. Super Short Big Bore Dampers come as standard, and additional 3mm carbon fiber damper stays for TRF dampers are also included.

Featured Components
●Carbon Fiber Lower Deck (2.25mm) ●Aluminum Lower Deck (3.0mm) ●2 Types of Carbon Fiber Front Upper Deck (2.0mm) ●2 Types of Carbon Fiber Rear Upper Deck (2.0mm) ●Carbon Fiber Damper Stays for TRF Super Short Big Bore Dampers (3.0mm) ●Carbon Fiber Damper Stays for TRF Dampers (3.0mm) ●Carbon Fiber Bumper Support (2.0mm) ●Aluminum Lower Bulkheads ●Aluminum Motor Mount ●TRF420 Front Direct Pulley ●TRF420 Aluminum Direct Cup Joints ●TRF420 Gear Differentials ●44mm Double Cardan Drive Shafts ●Lightweight Joint Pipes for Double Cardan Shafts ●44mm Lightweight Swing Shafts (Reinforced) ●TRF420 Wheel Axles ●TRF Super Short Big Bore Dampers ●TA07 Adjustable Ackerman Steering Set ●Aluminum Servo Mount ●Adjustable Suspension Mounts ●VG O-Rings ●Aluminum Turnbuckle Shafts ●04 Module Hard Coated Aluminum Pinion Gear (27T)

Information is current as of October 28, 2020. Specifications are subject to change without notice.

Electric R/C CarSeries no.686

1/10 R/C VQS (2020)

Item No: 58686

Away!
This R/C model assembly kit is an updated re-release version of a 1988 buggy from the Tamiya back catalog, which inherited its make-up from the legendary race-oriented Avante. The forward cockpit body design - and the rear wing - are molded in lightweight polycarbonate and pre-painted black, pre-cut with body mount holes pre-made to save on some preparation work. An ABS plastic monocoque frame is employed, with responsive shaft-driven 4WD plus a triple differential setup, four-wheel double wishbone suspension and plenty more - superb off-road driving awaits!

Capable Off-Road Chassis
This model's durable ABS plastic monocoque frame protects vital R/C equipment and boosts suspension performance with its excellent rigidity. A total of three differentials are employed: small front and rear planetary gear differentials, and a center differential with ball thrust bearing; front and rear gearboxes also have maintenance hatches. Universal shafts front and rear ensure smooth, efficient drive and minimal worry about parts coming loose due to bumps and shocks, while the Avante-based 4-wheel double wishbone suspension employs plastic lower arms with threaded shaft upper arms that allow swift adjustment of camber. Front uprights are aluminum, and stabilizers are included for the front and rear.

Specifications
★Length: 435mm, Width: 235mm, Height: 150mm ★Wheelbase: 275mm ★Tread: 200mm (Front & Rear) ★ABS Plastic Monocoque Frame ★Shaft-Driven 4WD ★Front & Rear Planetary Differential Gears, Center Ball Differential ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double-Wishbone Suspension ★Tire Width/Diameter: 31/88mm (Front), 38/88mm (Rear) ★CVA Oil Dampers ★Gear Ratio = 8.73:1 (using kit-standard 21T pinion gear) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of November 25, 2020. Specifications are subject to change without notice.

1/14 R/C Truck Series no.64

Scania R470 (Silver Edition)

Item No: 56364

★This R/C model assembly kit depicts Swedish manufacturer Scania's R470, which was winner of the prestigious Truck of the Year award in 2005. ★The highly realistic body comes pre-painted in silver, partnered with a durable chassis featuring metal parts, and allowing gear changes via transmitter. ★Length: 452mm, width: 187mm, height: 293mm. ★Motor is mounted over the front axles, and provides power to the rear wheels via propeller shaft. Propeller joints ensure consistent, smooth power.

Information is current as of October 28, 2020. Specifications are subject to change without notice.

Electric R/C Car Series no.683

1/14 R/C Mercedes-Benz Race Truck Actros MP4
MB Motorsport (TT-01 Type-E)

Item No: 58683

★This is an R/C model assembly kit recreating the Actros MP4 familiar to fans of the popular European truck racing circuit. ★Three-piece cab, front bumper and body are molded in polycarbonate, with stickers recreating the logos and livery. ★The model is based upon the proven shaft-driven 4WD of the TT-01 Type-E chassis. ★3-piece steering tie-rod setup gives smooth steering response, while 4-wheel double wishbone suspension ensures a low center of gravity and nimble footwork. ★Features front and rear gear differentials. ★Wheels and 70mm radial tires are dedicated parts for R/C racing truck models.

Information is current as of October 28, 2020. Specifications are subject to change without notice.

Special Edition R/C Product

1/10 R/C Volkswagen Type 2 (T1) Flower Power (M-05)

Item No: 47453

A True Legend
This R/C model assembly kit creates a special flower power version of the "23-window" type of the much-loved first generation (T1) Volkswagen Type 2, known as the Volkswagen Bus to many of its legions of fans, with an accurate polycarbonate body in detailed 1/10 scale. Stickers are included to apply the distinctive, hippy-inspired design motifs on the body, as well as window frames, emblem and more, while masking stickers are there to facilitate an easier paint job. Combined with classic style wheels and tread patterned tires, this stunning body is mounted on the rear-wheel drive M-06 chassis.

M-05: Low Center of Gravity, High Performance!
The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Plated dish design wheels have tires with realistic tread patterns and inner sponge. In this kit, the chassis is setup with the 239mm L wheelbase.

Specifications
★Length: 426mm, Width: 195mm, Height: 177mm ★Wheelbase: 239mm ★Tread (Front & Rear): 138mm ★Tire Width/Diameter (Front & Rear): 25/59mm ★Monocoque Frame ★3-Bevel Differential Gear ★Front-Wheel 2WD ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front & Rear Friction Dampers ★Gear Ratio = 5.8:1 ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately)

Separately Required Items
★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery Pack & Charger

Information is current as of October 5, 2020. Specifications are subject to change without notice.

Special Edition R/C Product

VQS (2020) High-Capacity Damper Set

Item No: 47455

★This set of oil dampers is a great fit for the VQS (2020) buggy. ★High quality aluminum cylinders are fitted with an oil seal and offer extremely smooth damping. ★A clamp type, screw-actuated spring retainer allows fine tuning of damper performance. ★Front dampers are equivalent to CVA mini size, and rear to CVA short size. ★Four springs and #400 damper oil are also included.

Information is current as of October 5, 2020. Specifications are subject to change without notice.

Hop-Up Options no.1972

Buggy Light Pod Set for LEDs

Item No: 54972

This set includes four each of round and square light pods with plastic pods and polycarbonate lens. Separately sold Item 53909 Tamiya LED Light Unit (TLU-01) gives your model super realism with lights turned on. This is compatible with Comical buggies series, the Hornet, and Buggy Champ. Screws, washers and nuts are included.
※Please note that cement may be required to attach to some bodies.

Information is current as of October 14, 2020. Specifications are subject to change without notice.