TQ R/C & Hobbies

Hop-Up Options no.1937

Brass Adjustable Suspension Mount (E)

Item No: 54937

★Brass components are weightier than aluminum counterparts, giving different ride characteristics. ★Change plastic bushings to fine-tune toe, roll center and skid angle.

Compatible Chassis
TA07 MS, TA07 PRO, TB Evo.6, TB Evo.6 MS, TB-05 PRO, TRF419, TRF419X, TRF419XR & TRF420 Chassis
*May require some shaving down of sections that come into contact with chassis.

Information is current as of January 8, 2020. Specifications are subject to change without notice.

Hop-Up Options no.1938

Brass Adjustable Separate Suspension Mounts (XB)

Item No: 54938

★Brass components are weightier than aluminum counterparts, giving different ride characteristics. ★Change plastic bushings to fine-tune toe, roll center and skid angle.

Compatible Chassis
TA07 MS, TA07 PRO, TB Evo.6, TB Evo.6 MS, TB-05 PRO, TRF419, TRF419X, TRF419XR & TRF420 Chassis
*May require some shaving down of sections that come into contact with chassis.

Information is current as of January 8, 2020. Specifications are subject to change without notice.

Hop-Up Options no.1939

Brass Adjustable Separate Suspension Mounts (A)

Item No: 54939

★Brass components are weightier than aluminum counterparts, giving different ride characteristics. ★Change plastic bushings to fine-tune toe, roll center and skid angle.

Compatible Chassis
TA07 MS, TA07 PRO, TB Evo.6, TB Evo.6 MS, TB-05 PRO, TRF419, TRF419X, TRF419XR & TRF420 Chassis
*May require some shaving down of sections that come into contact with chassis.

Information is current as of January 8, 2020. Specifications are subject to change without notice.

Hop-Up Options no.1940

Brass Adjustable Separate Suspension Mounts (E)

Item No: 54940

★Brass components are weightier than aluminum counterparts, giving different ride characteristics. ★Change plastic bushings to fine-tune toe, roll center and skid angle.

Compatible Chassis
TA07 MS, TA07 PRO, TB Evo.6, TB Evo.6 MS, TB-05 PRO, TRF419, TRF419X, TRF419XR & TRF420 Chassis
*May require some shaving down of sections that come into contact with chassis.

Information is current as of January 8, 2020. Specifications are subject to change without notice.

Hop-Up Options no.1952

Reinforced Tires Type C2 (24mm, 2pcs.)

Item No: 54952

★These R/C touring car tires offer superb grip on carpet surfaces in particular. ★Inner mesh helps limit deformation under stress.

Compatible Chassis
FF-03, FF-03 PRO, FF-04 EOV, TA05 Ver.II. TA06, TA06 PRO, TA06 MS, TA07 PRO, TA07 MS, TB-03, TB-04 PRO, TB-04, TB-05 PRO, TB Evo.6, TB Evo.6 MS, TB Evo.7, TRF419, TRF419X, TRF419XR, TRF420 & TT-02 Type-S Chassis

Information is current as of January 8, 2020. Specifications are subject to change without notice.

Spare Parts Series no.1651

Nylon Band (Small/Black, 20pcs.)

Item No: 51651

★Keep cables, etc. securely tied up out of harm's way with these small bands made from black nylon. ★The product contains twenty bands.

Information is current as of January 8, 2020. Specifications are subject to change without notice.

Special Edition R/C Product

1/10 Scale R/C F104 2017 Type
Lightweight Body Parts Set

Item No: 47436

★These are a lightweight version of the Tamiya original formula car body inspired by 2017 season trends. ★Molded in 0.8mm thickness polycarbonate (the original parts with the F104 PRO II were 1mm), they will give a lower center of gravity and lighter car. ★Features a sharp, slanting nose and bulging side pontoons. ★Additional parts are included to create alternative tapered lower sections for side pontoons. ★The complex front wing and its low rear counterpart are reproduced with separate parts, as are bargeboards and induction pod.

Compatible Chassis
F104, F104 Ver.II PRO, F104 PRO II, TRF101 & TRF103 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of January 8, 2020. Specifications are subject to change without notice.

1/35 Military Miniature Series No.371

German Infantry Set (Mid-WWII)

Item No: 35371

About the Uniform
In the middle years of WWII, most German Wehrmacht soldiers were issued with M36 uniform that was field gray with green collar, although some had the M40 with collar also in field gray. The uniform was rounded off with a helmet or cap, jack boots and - in many cases - suspenders for the trousers. Accessories such as pouches, canteen, shovel and more were usually carried, while weaponry depended upon one's rank: enlisted men would have the Kar98k rifle or MG34 machine gun, whereas non-commissioned officers wielded the MP40 submachine gun. Officers and machine gunners would frequently carry a pistol for self-defense.

About the Model
★This is a 1/35 scale plastic figure model assembly kit. ★German infantry troops are accurately captured in uniform typical of the Mid-WWII period. ★Figures are in realistic pose and have lifelike facial expressions that add a further element of authenticity to any model or diorama of the period. ★A plethora of accessories includes sharp renderings of weaponry such as Kar98k rifle, MG34 machine gun and the MP40 submachine gun. ★Also included are depictions of ammo cases, binoculars, grenade case, plus decals to recreate various Wehrmacht insignia.

Information is current as of January 16, 2020. Specifications are subject to change without notice.

1/24 Sports Car Series No.62

Toyota Supra 3.0GT Turbo

Item No: 24062

Wowing the Public
Toyota's 2000T, released in 1967, made the Japanese company famous around the world; nearly 20 years later, it was the inspiration for the 1986 release Supra (A70). The top of the line Supra in Japan was fitted with a 230hp engine and four-wheel double wishbone suspension for a superlative drive. The public was wowed by an elegant long nose-short deck body design that achieved a drag coefficient of just 0.32.

About the Model
★This is a 1/24 scale plastic model assembly kit. Length: 194mm, width: 78mm, height: 54mm. ★The sleek, refined long nose short deck form of the car is captured in style. ★Choose whether to assemble with headlights retracted or up. ★Realistic underside features depictions of suspension, exhaust and more. ★Streamlined interior recreates the actual car with accuracy. ★Includes different parts for dashboard, mirrors and wipers allowing recreation of a left- or right-hand drive vehicle. ★Masking stickers are included for use during the paint job.

Information is current as of January 8, 2020. Specifications are subject to change without notice.

Masterwork Series No.97

1/48 Mitsubishi A6M3a Zero Fighter 2-163, 201st Air Group (Finished Model)

Item No: 21097

★This is a factory finished plastic model portraying the 2-163 A6M3a belonging to the 201st Air Group out of Rabaul. ★A combination of painted and pad printed markings give a superbly realistic finish. ★Metal components are used for pitot tube recreation. ★Weathering is masterfully applied to ensure this is a highly authentic recreation. ★Comes with a seated pilot figure.

Information is current as of January 8, 2020. Specifications are subject to change without notice.