TQ R/C & Hobbies

Tamiya Indonesia Championship 2018

  • Seri 1 : 11 Maret 2018 - Sunter International Speedway
  • Seri 2 : 22 April 2018 - East RC
  • Seri 3 : 22 Juni 2018 - To be advised
  • Seri 4 : 22 Juli 2018 - Sunter International Speedway
  • Regulations attached PDF

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

1/10 R/C Nissan Skyline GT-R (R32) (TT-02D) Drift Spec

Monday, 05 February 2018 15:20 Published in Tamiya

Electric R/C Car Series No.651

1/10 R/C Nissan Skyline GT-R (R32) (TT-02D) Drift Spec

Item No: 58651

Still a Stunner
With a streamlined body and 280hp inline-6 turbocharged engine rumored to have been developed for racing, the full size Nissan Skyline GT-R (R32) caused quite a stir after its release in August 1989, and is set to do so again in 1/10 drift car form! This R/C model assembly kit recreates the R32 form using a polycarbonate body, with separate molded parts to recreate side mirrors and wing. The model is based upon the TT-02D, drift spec version of the TT-02 chassis.

Adaptable & Balanced TT-02 Chassis Drift Version
Enjoy the thrill of drifting with this specially tuned drift spec version of the TT-02 chassis. The chassis also features drift spec parts such as 24mm width drift tires (paired with stylish matte-finish metal-plated wheels), and CVA shock units on the 4-wheel double wishbone suspension. Full ball bearings, an aluminum motor heat sink, and a sport-tuned motor come as standard. Of course, the chassis retains the original TT-02's excellent drivability, ease of maintenance, and adaptability.

Specifications
★Length: 452mm, Width: 187mm, Height: 132mm ★Wheelbase: 257mm ★Tire Width/Diameter (Front & Rear): 24/63mm ★Bathtub-type Frame ★Shaft Driven 4WD ★Front/Rear 4-Bevel Resin Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front/Rear CVA Oil Shocks ★Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) ★Type 540 Sport-Tuned Motor ★Full Ball Bearings ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-Channel R/C Unit with ESC ★Battery Pack & Charger ★R6/AA/UM3 batteries for transmitter

Information is correct as of February 5, 2018. Specifications are subject to change without notice.

1/10 R/C F104 PRO II (w/Body)

Monday, 05 February 2018 15:18 Published in Tamiya

Electric R/C Car Series No.652

1/10 R/C F104 PRO II (w/Body)

Item No: 58652

Modern Day Racer
This R/C formula chassis assembly kit comes with a realistic polycarbonate body drawing on 2017 trends with a sharp, slanting nose and bulging side pontoons. Additional parts are included to create alternative tapered lower sections for side pontoons. The complex front wing and its low rear counterpart are reproduced with separate parts, as are bargeboards and induction pod.

Streamlined & Upgraded Chassis
The kit fits the lightweight and streamlined F104 chassis with various upgraded parts. At the front, the independent kingpin coil spring suspension's camber can be altered by switching upper mount attachment direction, while the rear rigid setup features a T-bar for smooth pitch damping, in combination with friction plates and a TRF damper. Rear wheels can be changed without the need to dismantle the aluminum ball differential. Semi-pneumatic synthetic rubber tires give great realism. Comes with full ball bearings.

Specifications
★Length: 440mm, Width: 180mm, Height: 88mm ★Wheelbase: 270mm ★Tread: 150mm (Front), 145mm (Rear) ★Tire Width/Diameter: 30/64 (Front), 35/64 (Rear) ★FRP Double Deck Frame ★Transverse Motor Rear Direct Drive 2WD ★Ball Differential ★Symmetrical Steering Tie-Rod ★Suspension: Kingpin Coil Spring (Front), T-Bar Rigid (Rear) ★Gear Ratio 4.16:1 (When used with 25T Pinion and 104T Spur Gears ★Requires Type 540 Motor and Electronic Speed Controller (sold separately)

Separately Required Items
★Motor ★2-Channel R/C Unit with ESC ★Battery Pack & Charger ★R6/AA/UM3 batteries for transmitter

Information is correct as of February 5, 2018. Specifications are subject to change without notice.

R/C Tank Series

1/25 R/C British Battle Tank Centurion Mk.III (w/Control Unit)

Item No: 56604

On the Move
This is a 1/25 R/C model assembly kit which depicts the Centurion Mk.III, a tank used by numerous militaries and forces across the world, in addition to the British Army. An assembly-type twin gearbox is installed in the hull rear. Its dual Type 130 motors are controlled via the MC-07 control unit, allowing a range of speeds and turning circles, even pivots. Realistic motion is enhanced by movable Horstmann suspension featuring metal coil springs, while tracks come pre-assembled. No less than four marking options are included in the kit.

Serving with Distinction
Developed to meet the ever-improving threat of German armor, the Centurion evolved into the British main battle tank in the post-WWII era. The Mk.III was perhaps the most polished Centurion variant, upgunned with the powerful 20 pounder gun; it was deployed in the Korean War, and was regarded by many as the lynchpin of the Allied forces on the peninsula. Some 2,800 Mk.III Centurions were produced between 1948 and 1956. Deployed not just by Britain but also by clients such as India, Israel and Egypt, they were a formidable force in whatever military's colors they were used.

Specifications
★Length: 385mm ★Width: 138mm ★Dedicated R/C control unit included ★2 running motors included

Separately Required Items
★4x alkaline R6/AA/UM3 batteries for control unit/model ★1x 6F22/006P (9V) battery for transmitter

Information is correct as of January 19, 2018. Specifications are subject to change without notice.

TA07 Carbon Stiffener (Center)

Monday, 05 February 2018 15:12 Published in Tamiya

Hop-Up Options no.1755

TA07 Carbon Stiffener (Center)

Item No: 54755

★This lightweight 2mm carbon fiber part links left/right rear stiffeners and K8 parts, giving the chassis greater pitch rigidity. ★Also helps reduce belt skipping.

Compatible Chassis
TA07 PRO Chassis

Information is correct as of January 5, 2018. Specifications are subject to change without notice.

M-07 Concept Carbon Damper Stay Set (for TRF Short Dampers)

Monday, 05 February 2018 15:09 Published in Tamiya

Hop-Up Options no.1790

M-07 Concept Carbon Damper Stay Set (for TRF Short Dampers)

Item No: 54790

★These damper stays allow 2.5mm lower damper attachment, for a lower center of gravity. Multiple attachment holes widen setup options. ★Crafted from rigid, lightweight 3mm-thick carbon fiber. ★Designed for use with TRF short dampers.

Compatible Chassis
M-07 Concept Chassis

Information is correct as of January 5, 2018. Specifications are subject to change without notice.

M-07 Concept Carbon Bumper Support

Monday, 05 February 2018 15:07 Published in Tamiya

Hop-Up Options no.1791

M-07 Concept Carbon Bumper Support

Item No: 54791

★This lightweight and rigid carbon fiber part will hold your bumper firmly in place, further protecting the car during bumps and crashes. ★Crafted from 2mm-thick carbon fiber.

Compatible Chassis
M-07 Concept Chassis

Information is correct as of January 5, 2018. Specifications are subject to change without notice.

German Assault Pioneer Team & Goliath Set

Monday, 05 February 2018 15:02 Published in Tamiya

1/35 Military Miniature Series No.357

German Assault Pioneer Team & Goliath Set

Item No: 35357

Small but Mighty
The Goliath was developed during WWII for German forces to use as a remote-controlled explosive device. Its initial Sd.Kfz.302 variant was a mere 160cm long, ran on two 12V battery-powered motors, and could bear 60kg of explosives; it was controlled and detonated via a reeled cable built in to the rear. Around 2,650 were produced between April 1942 and January 1944, the majority of which were deployed by assault pioneers. They were largely used for assaulting entrenched enemy positions and mine clearance.

About the Model
★This is a 1/35 scale plastic model assembly kit. ★Contains parts to assemble three figures and two Goliaths. Goliath length: 47mm, width: 24mm. ★Finely molded parts make for a highly accurate depiction of this diminutive tracked mine. ★Choose whether to assembled with rear hatch open or closed. Reel within is a separate part. Enameled wire recreates cable. ★Assembly type tracks have one-piece straight sections. ★Comes with parts to recreate a Goliath controller and two other soldiers. ★Includes fireams and accessories for a realistic finish.

Information is correct as of February 5, 2018. Specifications are subject to change without notice.

U.S. Medium Tank M4A3E8 Sherman "Easy Eight" Korean War

Monday, 05 February 2018 14:59 Published in Tamiya

1/35 Military Miniature Series No.359

U.S. Medium Tank M4A3E8 Sherman "Easy Eight" Korean War

Item No: 35359

Small but Mighty
The M4A3E8 "Easy Eight" was a smooth-riding horizontal volute spring suspension (HVSS) variant of the Allied workhorse Sherman medium tank. It was an improved threat over predecessors thanks to a more powerful, 76mm gun, and employed a V8 gasoline engine in its welded hull. As perhaps the finest of the Sherman variants it played an important role in the eventual Allied WWII victory, but its service did not end there: When conflict flared again in June 1950, this time on the Korean peninsula, Easy Eights were refurbished and deployed again, taking on enemy T34/85 tanks operated by the Korean People's Army from the invading North, and serving till the armistice of 1953. The distinctive marking pattern shown in the main picture on this page is said to have been employed in an attempt at psychological warfare.

About the Model
★This is a 1/35 scale plastic model assembly kit. Length: 215mm, width: 86mm. ★The form of a Korean War M4A3E8 is expertly captured, with renderings of the various upgrades made to the tank. ★Late production Sherman deflector and gun shield canvas cover are authentically recreated, along with updated gun travel lock and radio equipment. ★Double-pin T80 tracks are rendered accurately and fuss-free by belt-type parts. ★Separate slide mold M2 machine gun mount and barrel attachment point parts. ★Comes with commander and loader torso figures, plus 2 marking options including the "Rice's Red Devils" company of the 89th Tank Battalion. ★Parts included to create enemy field car.
*This interpretation of the "Rice's Red Devils" markings is based upon photographs and contributing research from David Doyle.

Information is correct as of February 5, 2018. Specifications are subject to change without notice.

Messerschmitt Bf109 G-6

Monday, 05 February 2018 14:55 Published in Tamiya

1/48 Aircraft Series No.117

Messerschmitt Bf109 G-6

Item No: 61117

Gustav with Gusto!
With over 30,000 produced, the Messerschmitt Bf109 is the most prolifically manufactured fighter in history; of its variants, the G-6 was the most numerous at 13,000 aircraft. In response to improving Allied foes in the air, Bf109 G aircraft had the more powerful DB605 engine, and from the G-6 were equipped with dual 13mm MG131 machine guns that required the distinctive bulges on either side of the cockpit cowling known as "Beule." Some were even given a 20mm cannon gondola under each wing for further improved firepower. The Bf109 G-6 was deployed on both the Western and Eastern fronts, in particular dominating Soviet adversaries as it continued in service through to the end of WWII.

About the Model
★This is a 1/48 scale plastic model assembly kit recreating the Bf109 G-6. Length: 188mm, wingspan: 207mm. ★In depth study of actual aircraft led to this highly detailed kit. ★Features an exquisite recreation of the DB605 engine. ★Separate parts are included to recreate wing underside 20mm cannon gondolas. ★Poly cap allows detachment and attachment of drop tank. ★Choose from 2 different types of air intake part - standard and with dust filter. ★Can be assembled with standard or Galland panzer canopy rear armor plate. ★Construct with canopy open or closed. ★Main and radiator flaps can be depicted up or down. ★Comes with a seated pilot figure for further realism. ★3 marking options are included, plus canopy masking stickers and a color painting guide.

Information is correct as of February 2, 2018. Specifications are subject to change without notice.

Baron Viento (FM-A Chassis)

Monday, 05 February 2018 14:52 Published in Tamiya

Mini 4WD REV Series No.9

Baron Viento (FM-A Chassis)

Item No: 18709

New Mini 4WD Nobility!
The third model on the new cutting-edge FM-A chassis offers something of a different flavor - the Baron Viento has a design inspired by a customized classic car of yesteryear. Separate parts for grille and headlights are included, while the chopped roof has a realistic molded depiction.
★Stylish body is molded in light green ABS. ★FM-A chassis and rear stay components are black ABS, as are A parts such as rollers and skid bar. ★White dish-type wheels add a further touch of glamor, and are paired with black low-profile tires. ★Dedicated metallic stickers included. ★Gear ratio = 3.5:1. ★Comes with a Type 130 motor.

Information is correct as of January 9, 2018. Specifications are subject to change without notice.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  Next 
  •  End 
  • »
Page 1 of 3

Social sharing

Visitors

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday233
mod_vvisit_counterYesterday879
mod_vvisit_counterThis week2034
mod_vvisit_counterThis month13296
mod_vvisit_counterAll2232093

Who's Online

We have 121 guests online