Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)
Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:
Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:
https://forms.gle/ZqUybUaVissSRpbb8
Registration fee: IDR 300,000 per racer, eligible for 20 run
Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country. For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.
Regulation:
1. Race system is bracket system 4-2-1
Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined
2. All parts MUST BE Tamiya original parts.
3. Racer can use their own rechargeable batteries
4. Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5. Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.
Other things to note:
1. Please note that all racers should bear their own tickets and accomodation to Jakarta.
2. Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.
Racing Mini 4WD Series No.94
Neo-VQS (VZ Chassis)
Item No: 18094
A New Star
This assembly kit creates the Neo-VQS, a stylish and speedy Mini 4WD racer inspired by its predecessor the Vanquish Jr. The refined body is molded in black, and paired with the brand new VZ chassis, also molded in black along with its A parts. Red 5-spoke wheels are joined by black low-profile tires, whilst an additional accent is provided by marking stickers with red and white elements.
VZ Chassis
The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents. It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS. This chassis features a gear ratio of 3.5:1.
Specifications
★Length: 158mm ★Width: 98mm ★Height: 43mm ★Includes double-shaft motor/Includes motor ★Easy snap-together assembly
Separately Required Items
★R6/AA/UM3 batteries (x2)
Information is current as of January 8, 2020. Specifications are subject to change without notice.
Mini 4WD Product
Razorback Clear Violet Special (FM-A)
Item No: 95524
★This assembly kit creates a Clear Violet Special version of the Razorback Mini 4WD car. ★In keeping with the name, it features an ABS plastic body molded in clear violet. ★The FM-A chassis is silver and violet. ★Gold color 6-spoke wheels are paired with chunky trail tires. ★Clear stickers are included to decorate the body.
Information is current as of January 8, 2020. Specifications are subject to change without notice.
Brake Set (for AR Chassis) (Fluorescent Yellow)
Saturday, 01 February 2020 17:36 Published in Tamiya
Mini 4WD Product
Brake Set (for AR Chassis) (Fluorescent Yellow)
Item No: 95535
★The brake set is a must-have item for racers who are aiming at the podium in official contests. The brake sponge comes pre-cut in 5mm widths, and 2 different frictions of sponge are included. ★The brake can be applied to the front or rear of the car, and is compatible with both small- and large-diameter wheels/tires.
Compatible Cars
FM-A*1, Super-II, VS, MS*1 & AR Chassis cars
*1 Cars fitted with Item 15430 FRP Rear Multi Roller Setting Stay.
Information is current as of January 8, 2020. Specifications are subject to change without notice.
Lightweight Plastic Spacer Set (12/6.7/6/3/1.5mm) (Purple)
Saturday, 01 February 2020 17:24 Published in Tamiya
Mini 4WD Product
Lightweight Plastic Spacer Set (12/6.7/6/3/1.5mm) (Purple)
Item No: 95536
★Spacers are a vital component in adjusting the setup of roller and brake parts. ★These low-friction plastic parts are lighter than aluminum counterparts for minimal impact upon car speed. ★Contains five each of 12mm, 6.7mm, 6mm, 3mm and 1.5mm spacers molded in a fetching shade of purple.
Compatible Cars
Mini 4WD & Mini 4WD PRO cars
Information is current as of January 8, 2020. Specifications are subject to change without notice.
Mini 4WD Product
Front Under Guard (Fluorescent Yellow)
Item No: 95537
★Your machine scaling the circuit fence after landing can be a frustrating way to lose a race, and the under guard reduces the chances of this happening. ★Made from a low-friction resin material, it also helps your Mini 4WD racer keep its momentum through tricky grass sections. ★This fluorescent yellow 3-piece part is compatible with both normal and wide roller set-ups. ★Small parts for attachment are also included.
Compatible Cars
MA, MS, FM-A, AR, VS, Super-II and Super XX Chassis cars
Information is current as of January 8, 2020. Specifications are subject to change without notice.
Lightweight Double Aluminum Rollers (13-12mm/Purple)
Saturday, 01 February 2020 17:20 Published in Tamiya
Mini 4WD Product
Lightweight Double Aluminum Rollers (13-12mm/Purple)
Item No: 95540
★These aluminum components combine 12mm and 13mm rollers for a lightweight solution to your racing needs. ★When the 13mm roller meets the course wall and the car begins to lean, the 12mm section comes into play and stops the car leaning too far. ★Rollers are given a classy purple anodized finish.
Compatible Cars
Mini 4WD and Mini 4WD PRO cars
Information is current as of January 8, 2020. Specifications are subject to change without notice.
HG 19mm Tapered Aluminum Ball-Race Rollers (Ringless/Purple)
Saturday, 01 February 2020 17:17 Published in Tamiya
Mini 4WD Product
HG 19mm Tapered Aluminum Ball-Race Rollers (Ringless/Purple)
Item No: 95541
★These tapered rollers give your car a better chance of making its way back onto the track if it happens to climb up the course wall. ★These 19mm components are crafted in purple anodized aluminum and feature built in 520 ball bearings for super smooth rotation. ★2x8mm screws and roller spacers are included.
Compatible Cars
Mini 4WD and Mini 4WD PRO cars
*Some bodies may require modification.
Information is current as of January 8, 2020. Specifications are subject to change without notice.
Mini 4WD Product
Mini 4WD Car Dimension Checker (Neon Green)
Item No: 95548
★This checker is a simple rendering of Mini 4WD car dimension regulations. ★Molded in 2mm thickness acrylic, it features a clear base with the Racing Mini 4WD logo printed on it and neon green side panels. ★The checker fits inside the Mini 4WD Portable Pit. ★Inner dimensions: 165mm x 105mm x 50mm.
Compatible Cars
Mini 4WD and Mini 4WD PRO cars
Information is current as of January 8, 2020. Specifications are subject to change without notice.
Mini 4WD Product
Buck Blader
Item No: 95532
Don't Pass on this Buck!
This assembly kit creates a static display model of the Buck Blader, a car that initially apeared in the popular "Let's & Go!!" comic in Japan. Features include the futuristic design with splayed wheels, plus detailed depictions of suspension and other fantastic mechanical designs, with metal-plated chassis parts adding to the end result. Choose whether to equip the cockpit rear with a cooling fan or tank. Clear parts are used to show off the interior detail of the model, and tires have been given a realistic tread pattern. Stickers are included to decorate the finished model.
Specifications
★Length: 132mm, width: 88mm, height: 40mm. ★Simple snap-together assembly. ★With modifications to the body, it can be mounted on the Super TZ, Super-1 and Super FM chassis.
Information is current as of January 8, 2020. Specifications are subject to change without notice.
Grade-Up Parts series no.524
FRP Wide Front Plate (for VZ Chassis)
Item No: 15524
★This plate is crafted in rigid and lightweight 1.5mm thickness FRP. ★It allows attachment of 9mm, 11mm, 13mm, 17mm and 19mm rollers within the official Mini 4WD regulations on car dimensions. ★Can be employed with the front bumper attached or detached.
Compatible Cars
MA, VZ, FM-A, AR, Super X and Super XX Chassis cars
*Some chassis and bodies may require modification.
Information is current as of January 8, 2020. Specifications are subject to change without notice.
Our Products
Social sharing
Who's Online
We have 196 guests online
Powered by ©Tukang-web.com. All rights reserved.