TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

1/14 R/C Buggyra Fat Fox (TT-01 Type-E)

Saturday, 05 January 2019 12:03 Published in Tamiya

Electric R/C Car Series No.661

1/14 R/C Buggyra Fat Fox (TT-01 Type-E)

Item No: 58661

★Here comes a new R/C racing truck - this model recreates the 2018 truck fielded by Buggyra Racing, champion of the 2017 season. ★A realistic polycarbonate body captures the sporty form of the truck, with stickers included to recreate the multitude of sponsor logos. ★The model is based upon the proven shaft-driven 4WD TT-01 Type-E chassis.

Information is correct as of December 5, 2018. Specifications are subject to change without notice.

1/10 R/C Toyota Hilux Extra Cab (CC-01)

Saturday, 05 January 2019 12:01 Published in Tamiya

Electric R/C Car Series No.663

1/10 R/C Toyota Hilux Extra Cab (CC-01)

Item No: 58663

★This model recreates Toyota (GB) PLC's one-off tribute to Tamiya's legendary Bruiser! ★A polycarbonate body realistically depicts the 2-door extra cab form. ★The model is based upon the versatile CC-01 chassis, which provides powerful 4WD.

Information is correct as of December 5, 2018. Specifications are subject to change without notice.

1/10 R/C TOYOTA GAZOO Racing TS050 Hybrid (F103GT)

Saturday, 05 January 2019 12:00 Published in Tamiya

Electric R/C Car Series No.665

1/10 R/C TOYOTA GAZOO Racing TS050 Hybrid (F103GT)

Item No: 58665

This is an R/C model assembly kit recreating the 2018 iteration of the TS050 Hybrid, a car developed for racing by TOYOTA GAZOO Racing. A lightweight and durable polycarbonate body captures the aerodynamically honed form in style, with separate parts included to recreate nose, headlight cases, canards, rear wing and shark fin. Stickers are included in the kit to depict not only the numerous sponsor logos, but also parts of the livery’s red and black sections, and the model can be completed as car No.7 or No.8. The F103GT chassis gives a crisp drive and fuss free assembly.

★Length: 418mm, width: 188mm, height: 115mm. ★The F103GT chassis uses a direct drive 2WD setup transmitting power from the rear-mounted motor to the rear wheels. ★1.5mm upper and 2.5mm lower FRP decks make up the double-deck frame. ★Utilizes kingpin coil-sprung independent L/R front suspension. ★Front uprights feature 850 ball bearings and provide a caster angle of 3 degrees. ★Rear rigid suspension employs T-bar and friction damper. ★Motor mount allows adjustment of ground clearance setting. ★Comes with ball differential and grippy tires.

Information is correct as of December 5, 2018. Specifications are subject to change without notice.

1/10 R/C Super Astute (2018)

Saturday, 05 January 2019 11:58 Published in Tamiya

Special Edition R/C Product

1/10 R/C Super Astute (2018)

Item No: 47381

★This is a re-released and updated version of the 1991 release Super Astute. ★2.5mm FRP lower deck has been updated. ★Features a tweaked version of the Tamiya Traction Control (TTC) system which protects gears from impacts and give stable drive. ★4-wheel double wishbone suspension setup utilizes CVA oil dampers.

Information is correct as of December 5, 2018. Specifications are subject to change without notice.

Hop-Up Options no.1486

TB-05 Carbon Front Damper Stay (for TRF Super Short Big Bore Dampers)

★This is a lightweight and rigid 3mm carbon fiber damper stay for use with TRF Super Short Big Bore Dampers. ★Features 6 different damper attachment holes for a finer array of setup options. ★Screws and ball connector nuts for attachment are included.

Compatible Chassis
TB-05 PRO Chassis

Information is correct as of December 5, 2018. Specifications are subject to change without notice.

Hop-Up Options no.1847

TB-05 Carbon Rear Damper Stay (for TRF Super Short Big Bore Dampers)

Item No: 54847

★This is a lightweight and rigid 3mm carbon fiber damper stay for use with TRF Super Short Big Bore Dampers. ★Features 7 different damper attachment holes for a finer array of setup options. ★Screws and ball connector nuts for attachment are included.

Compatible Chassis
TB-05 PRO Chassis

Information is correct as of December 5, 2018. Specifications are subject to change without notice.

Aluminum Wing Washers (Black)

Saturday, 05 January 2019 11:52 Published in Tamiya

Hop-Up Options no.1848

Aluminum Wing Washers (Black)

Item No: 54848

★Handy washers perfect for securing R/C touring car polycarbonate body wings. ★14mm diameter components also help lessen the risk of wing breakage in crashes. ★Comes with 3x8mm titanium screws.

Information is correct as of December 5, 2018. Specifications are subject to change without notice.

Aluminum Wing Washers (Blue)

Saturday, 05 January 2019 11:22 Published in Tamiya

Hop-Up Options no.1849

Aluminum Wing Washers (Blue)

Item No: 54849

★Handy washers perfect for securing R/C touring car polycarbonate body wings. ★14mm diameter components also help lessen the risk of wing breakage in crashes. ★Comes with 3x8mm titanium screws.

Information is correct as of December 5, 2018. Specifications are subject to change without notice.

3x6mm Hi-Grade Aluminum Hex Head Screws (Blue, 5pcs.)

Saturday, 05 January 2019 11:14 Published in Tamiya

TRF Series no.327

3x6mm Hi-Grade Aluminum Hex Head Screws (Blue, 5pcs.)

Item No: 42327

★Precision machined aluminum hex head screws help enable a smoother, highly secure build. ★Great for tasks such as attaching aluminum components to carbon fiber plate. ★Screws have a stylish blue anodized finish.

Information is correct as of December 5, 2018. Specifications are subject to change without notice.

TRF Series no.328

3x6mm Hi-Grade Aluminum Countersunk Hex Head Screws (Blue, 5pcs.)

Item No: 42328

★Precision machined aluminum countersunk hex head screws help enable a smoother, highly secure build. ★Great for tasks such as attaching aluminum components to carbon fiber plate. ★Screws have a stylish blue anodized finish.

Information is correct as of December 5, 2018. Specifications are subject to change without notice.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  4 
  •  Next 
  •  End 
  • »
Page 1 of 4

Social sharing

Who's Online

We have 201 guests online